The Ecodesign for Energy-Related Products and Energy Information (Lighting Products) Regulations 2021 No. 1095 xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"
Introductory Text
PART 1 INTRODUCTION
1.Citation, commencement and extent
PART 2 ECODESIGN AND ENERGY LABELLING FOR LIGHT SOURCES AND SEPARATE CONTROL GEARS
CHAPTER 1 GENERAL
Interpretation
CHAPTER 2 ECODESIGN FOR LIGHT SOURCES AND SEPARATE CONTROL GEARS
3.Application
4.Ecodesign requirements
5.Exemptions
6.Removal of light sources and separate control gears
7.Conformity assessment
8.Verification procedure for market surveillance purposes
9.Measurements and calculations
10.Circumvention and software updates
CHAPTER 3 ENERGY LABELLING OF LIGHT SOURCES
11.Application
12.Obligations of suppliers
13.Obligations of dealers
14.Obligations of internet hosting platforms
15.Measurement methods
16.Verification procedure for market surveillance purposes
17.Light sources placed on the market before 1st October 2021
PART 3 GENERAL
18.Review
19.Revocations
20.Consequential amendments of the 2010 Regulations
21.Consequential amendments of the Energy Information Regulations 2011
22.Transitional and saving provisions in connection with ecodesign requirements
23.Transitional and saving provisions in connection with energy labelling requirements
Signature
SCHEDULE 1
Interpretation
1.Interpretation
SCHEDULE 2
Verification procedure for market surveillance purposes
1.Interpretation
2.Verification procedure
3.The product model conforms to these Regulations if all the...
4.For the purposes of paragraph 3(a), (b), (d) and (e),...
5.For the purpose of paragraph 3(c), the market surveillance authority...
6.If any of the conditions set out in paragraph 3...
7.Where a product model has been designed to be able...
8.Verification tolerances
SCHEDULE 3
Ecodesign requirements for light sources and separate control gears
Energy efficiency requirements
3.Functional requirements
4.Information requirements
Light sources
5.(1) The following information must be displayed on light sources...
Packaging
Light sources
6.(1) Where a light source is placed on the market...
Separate control gears
7.(1) Where a separate control gear is placed on the...
Websites
8.(1) For any separate control gear that is placed on...
9.Technical documentation
10.Information for products specified in paragraph 3 of Schedule 4
11.Reference control settings
SCHEDULE 4
Exemptions
1.Specified approvals
2.Additional exemptions
3.Limited exemptions
SCHEDULE 5
Functionality after endurance testing
1.(1) Models of LED and OLED light sources must undergo...
2.(1) The endurance test for LED and OLED light sources...
SCHEDULE 6
Exemptions
1.Chapter 3 of Part 2 of these Regulations does not...
2.Chapter 3 of Part 2 of these Regulations does not...
3.(1) Except as provided in sub-paragraph (2), Chapter 3 of...
SCHEDULE 7
Labels for light sources
1.Format and placing of labels
2.(1) The format of the standard sized label is as...
3.Label designs
SCHEDULE 8
Product information
1.Product information sheet
2.(1) An equivalence claim involving the power of a replaced...
3.Information to be displayed for a containing product
4.Information to be displayed on the supplier’s website
SCHEDULE 9
Technical documentation
1.The technical documentation referred to in regulation 12(1)(e) must include...
SCHEDULE 10
Information to be provided in visual advertisements, technical promotional material, and in distance selling except distance selling on the internet
1.(1) In— (a) visual advertisements for light sources, for the...
2.(1) The energy efficiency class and the range of energy...
3.Where a product is sold through telemarketing based distance selling,...
4.For all the situations referred to in paragraphs 1 and...
SCHEDULE 11
Information to be provided in the case of distance selling through the internet
1.The following requirements apply to distance selling through the internet....
2.(1) The appropriate label made available by suppliers in accordance...
3.The image used for accessing the label in the case...
4.In the case of a nested display, the sequence of...
5.(1) The electronic product information sheet made available by suppliers...
SCHEDULE 12
Energy labelling of light sources – energy efficiency classes and calculation method
1.The energy efficiency class of light sources must be determined...
SCHEDULE 13
Verification procedure for market surveillance purposes
1.Interpretation
2.Verification procedure
3.The product model conforms to these Regulations if all the...
4.(1) For the purposes of paragraph 3(a), (b) and (c),...
5.If any of the conditions set out in paragraph 3...
6.Where a model has been designed to be able to...
7.Verification tolerances
Explanatory Note