Search Legislation

The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019

Draft Legislation:

This is a draft item of legislation. This draft has since been made as a UK Statutory Instrument: The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019 No. 539

Amendment of regulation 2

This section has no associated Explanatory Memorandum

2.—(1) Regulation 2 (interpretation) is amended as follows.

(2) For paragraph (1), substitute—

(1) In these Regulations—

“applicable implementing measure” means in relation to an energy-related product mentioned in the left hand column of the table in paragraph 4 of Schedule 1, the corresponding implementing measure referred to in the right hand column of that table;

“approved body” has the meaning given to it in paragraph 1(1) of Schedule 1B;

“authorised person” means a person authorised by the market surveillance authority in accordance with regulation 12;

“authorised representative” means—

(a)

a person who—

(i)

immediately before exit day was established in the United Kingdom or an EEA state and was appointed by a manufacturer by written mandate to act on its behalf in relation to such tasks as are specified in the mandate with regard to the manufacturer’s obligations under these Regulations, an implementing measure, or RAMS; and

(ii)

on or after exit day continues to be so established and appointed by the manufacturer to perform those tasks; or

(b)

a person who, on or after exit day, is established in the United Kingdom and is appointed by a manufacturer by written mandate to act on its behalf in relation to such tasks as are specified in the mandate with regard to the manufacturer’s obligations under these Regulations, an implementing measure, or RAMS;

“companies qualifying as small or medium-sized” means a company that qualifies as small under section 382 of the Companies Act 2006(1) or as medium-sized under section 465 of that Act;

“components and sub-assemblies” means parts which are intended to be incorporated into products and—

(a)

which are not placed on the market or put into service as individual parts for end-users; or

(b)

the environmental performance of which cannot be assessed independently;

“conformity assessment activities” means any activities connected with conformity assessment, including calibration, testing, certification and inspection;

“conformity assessment body” means a body that performs conformity assessment activities;

“designated standard” has the meaning given to it by regulation 2A;

“the Decision” means Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008 on a common framework for the marketing of products(2), as it had effect immediately before exit day;

“the Directive” means Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products(3) as it had effect immediately before exit day;

“ecodesign requirement” means any requirement in relation to a product, or the design of a product, intended to improve its environmental performance, or any requirement for the supply of information with regard to the environmental aspects of a product;

“ecological profile” means a description, in accordance with the implementing measure applicable to the product, of the inputs and outputs (such as materials, emissions and waste) associated with a product throughout its life cycle which are significant from the point of view of its environmental impact, expressed in physical quantities that can be measured;

“energy-related product” means—

(a)

any good that has an impact on energy consumption during use which is placed on the market or put into service; and

(b)

parts—

(i)

which are intended to be incorporated into any good that has an impact on energy consumption during use which is placed on the market or put into service;

(ii)

which are placed on the market or put into service as individual parts for end-users; and

(iii)

of which the environmental performance can be assessed independently;

“environmental aspect” means an element or function of a product that can interact with the environment during its life cycle;

“environmental impact” means any change to the environment wholly or partially resulting from a product during its life cycle;

“environmental performance” of a product means the results of the manufacturer’s management of the environmental aspects of the product, as reflected in its technical documentation file where a technical documentation file is required for that product;

“identification number” means the number which identifies an approved body and follows a UK marking(4) affixed to a product pursuant to regulation 4, which is affixed—

(a)

by the approved body; or

(b)

where instructed to do so by the approved body, by the manufacturer or the manufacturer’s authorised representative;

“implementing measure” means a measure made under the Directive before exit day, or regulations made under regulation 22 on or after exit day;

“importer” means a person established in the United Kingdom who places a product from outside the United Kingdom on the United Kingdom market;

“life cycle” means the consecutive and interlinked stages of a product from raw material use to final disposal;

“manufacturer” means a person who—

(a)

manufactures a product; or

(b)

has a product designed or manufactured;

and markets that product under its name or trademark;

“place on the market” except in regulation 20A, means the first making available of a product on the United Kingdom market, and related expressions must be construed accordingly;

“product” means an energy-related product;

“product design” means the set of processes that transform legal, technical, safety, functional, market or other requirements to be met by a product into the technical specification for that product;

“put into service” except in regulation 20A, means the first use of a product for its intended purpose on the United Kingdom market, and related expressions must be construed accordingly;

“RAMS” means Regulation (EC) No 765/2008 of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation EEC No 339/93;

“self-regulation” includes voluntary agreements; and

“technical specification” means, except in regulation 2A, a document that prescribes technical requirements to be fulfilled by a product, process, service or system..

(3) For paragraph (2), substitute—

(2) Expressions not defined in paragraph (1) which are used in these Regulations and—

(a)in an implementing measure;

(b)in the Directive; or

(c)in RAMS;

have the meaning they bear in that implementing measure, Directive, or RAMS..

(1)

2006 c. 46 as amended by S.I. 2013/3008 and S.I. 2015/980.

(2)

OJ L 218, 13.8.2008, p. 82–128.

(3)

OJ L 285 31.10.2009, p. 10, as amended by Directive 2012/27/EU of the European Parliament and of the Council of 25 October 2012 on energy efficiency (OJ L 315, 14.11.2012, p. 1).

(4)

For the purpose of any enactment, the UK marking is defined as the marking in the form published in accordance with RAMS.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Draft Explanatory Memorandum

Draft Explanatory Memorandum sets out a brief statement of the purpose of a Draft Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Draft Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources