Search Legislation

The Spring Traps Approval (Scotland) Amendment Order 2018

 Help about what version

What Version

  • Latest available (Revised)
  • Original (As made)
 Help about opening options

Opening Options

Status:

This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Amendment of the Spring Traps Approval (Scotland) Order 2011

This section has no associated Policy Notes

4.—(1) After entry 5 (DOC 200 and DOC 250 Trap), insert the following entry—

5a. Duke 116 manufactured by or under the authority of Duke Company, 508 E. Brame Avenue, West Point, MS 39773, USA.The trap is to be used only for the purpose of killing or taking grey squirrels.
The trap must be set in a natural or artificial tunnel or enclosure which is suitable for minimising the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of target species..

(2) After entry 9 (Fuller Trap), insert the following entries—

9a. Goodnature A18 Grey Squirrel Trap manufactured by or under the authority of Goodnature Limited, 8 Horner Street, Newtown, Wellington, 6021, New Zealand.The trap is to be used only for the purpose of killing or taking grey squirrels and rats.
The trap must be (a) set in a natural or artificial tunnel or enclosure which is suitable for minimising the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of target species or (b) set at a minimum height of 30cm off the ground and entered by an artificial tunnel attached to the trap and that protrudes for a distance of no less than 70mm from the trap entrance, which is suitable for minimising the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of target species.
9b. Goodnature A18 Mink Trap manufactured by or under the authority of Goodnature Limited, 8 Horner Street, Newtown, Wellington, 6021, New Zealand..The trap is to be used only for the purpose of killing or taking mink.
The trap must be (a) set in a natural or artificial tunnel or enclosure which is suitable for minimising the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of target species or (b) set at a minimum height of 30cm off the ground and entered by an artificial tunnel attached to the trap and that protrudes for a distance of no less than 70mm from the trap entrance, which is suitable for minimising the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of target species.
9c. Goodnature A24 Pro manufactured by or under the authority of Goodnature Limited, 8 Horner Street, Newtown, Wellington, 6021, New Zealand.The trap is to be used only for the purpose of killing or taking of rats and mice.
The trap must be (a) set in a natural or artificial tunnel or enclosure which is suitable for minimising the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of target species (b) or set at a minimum height of 30cm off the ground and entered by an artificial tunnel attached to the trap and that protrudes for a distance of no less than 70mm from the trap entrance, which is suitable for minimising the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of target species.
9d. Goodnature A24 rat and stoat Trap manufactured by or under the authority of Goodnature Limited, 8 Horner Street, Newtown, Wellington, 6021, New Zealand.The trap is to be used only for the purpose of killing stoats, rats, weasels and mice.
The trap must be (a) set in a natural or artificial tunnel or enclosure which is suitable for minimising the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of target species or (b) set at a minimum height of 30cm off the ground and entered by an artificial tunnel attached to the trap and that protrudes for a distance of no less than 70mm from the trap entrance, which is suitable for minimising the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of target species..

(3) After entry 13 (Kania Trap 2500), insert the following entries—

13a. KORO Large Rodent Double Coil Spring Snap Trap manufactured by or under the authority of Koro Traps, Box 5 Grp.22 RR2, Dugald, Manitoba, R0E 0K0, Canada.The trap is to be used only for the purpose of killing or taking grey squirrels and rats.
The trap must be so positioned that animals can only enter it from the front (the front is the side from which the letters KORO can be read face-on and the correct way up) and must be set within an artificial closed-end tunnel which is suitable for minimising the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of target species.
13b. KORO Rodent Snap Trap manufactured by or under the authority of Koro Traps, Box 5 Grp.22 RR2, Dugald, Manitoba, R0E 0K0, Canada.The trap is to be used only be used for the purposes of killing and taking rats and weasels.
The trap must be so positioned that animals can only enter it from the front (the front is the side from which the letters KORO can be read face-on and the correct way up) and must be set within an artificial closed-end tunnel which is suitable for minimising the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of target species..

(4) After entry 16 (Nooski mouse trap), insert the following entry—

16a. Procull Trap manufactured by or under the authority of Elgeeco, 108 Downlands Way, South Wonston, Winchester, Hampshire, SO21 3HS, UK.The trap is to be used only be used for the purpose of killing or taking grey squirrels.
The trap must be set in the tunnel provided by the manufacturer as part of the trap and used in such a way that minimises the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of the target species..

(5) After entry 22 (Springer No 6 Multi-purpose), insert the following entry—

22a. Tully Trap manufactured by or under the authority of KM Pressings Ltd, 37B Copenhagen Road, Sutton Fields Industrial Estate, Hull, East Yorkshire, HU7 0XQ, UK.The trap is to be used only for the purpose of killing or taking stoats, weasels and rats.
The trap must be set in a natural or artificial tunnel which is suitable for minimising the chances of capturing, killing or injuring non-target species whilst not compromising the killing or taking of target species..

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Policy Note

Policy Note sets out a brief statement of the purpose of a Scottish Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Scottish Statutory Instrument accessible to readers who are not legally qualified and accompany any Scottish Statutory Instrument or Draft Scottish Statutory Instrument laid before the Scottish Parliament from July 2012 onwards. Prior to this date these type of notes existed as ‘Executive Notes’ and accompanied Scottish Statutory Instruments from July 2005 until July 2012.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources