PART 2 OBLIGATIONS OF ECONOMIC OPERATORS

CHAPTER 1 MANUFACTURERS

6 Technical documentation and conformity assessment
Before placing a product on the market or using it for their own purposes, a manufacturer shall—
(a) carry out the relevant conformity assessment procedure or have a relevant conformity assessment procedure carried out; and
(b) draw up the technical documentation referred to—
(i) for a product in respect of which the conformity assessment procedure in regulation 39(1)(a) is being carried out, in point 3(c) of Module B of Annex III to the ATEX Directive (as amended from time to time);
(ii) for a product in respect of which the conformity assessment procedure in regulation 39(1)(b)(i) is being carried out, in point 3(c) of Module B of Annex III to the ATEX Directive (as amended from time to time);
Word in reg. 6(b)(ii) substituted (10.8.2023) by The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations (Northern Ireland) 2017 (Amendment) (Northern Ireland) Regulations 2023 (S.I. 2023/861), regs. 1(b), 4(1)(a)
(iii) for a product in respect of which the conformity assessment procedure in regulation 39(1)(b)(ii) or 39(1)(c) is being carried out, in point 2 of Module A of Annex VIII to the ATEX Directive (as amended from time to time);
Words in reg. 6(b)(iii) inserted (10.8.2023) by The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations (Northern Ireland) 2017 (Amendment) (Northern Ireland) Regulations 2023 (S.I. 2023/861), regs. 1(b), 4(1)(b)
(iv) for a product in respect of which the conformity assessment procedure in regulation 39(1)(d) is being carried out, in point 2 of Module G of Annex IX to the ATEX Directive (as amended from time to time);