The Road Vehicles Lighting (Amendment) Regulations 1994

Front position lamps

11.—(1) In paragraph 5 of Part I of Schedule 2—

(a) after the word “Markings”, there shall be added the words “(see also regulation 3(6))”.

(b) in sub-paragraph (c), the entry in the left hand column after the words “1st October 1990” there shall be added the words “and before the 1st October 1995”; and

(c) after sub-paragraph (c) there shall be inserted the following paragraph—

“(ca) Any other vehicle manufactured on or after the 1st October 1995:

An approval mark or the British Standard mark which is specified in sub-paragraph (b) of the definition of “British Standard mark” below.”

(2) In paragraph 13 of Part I of Schedule 2—

(a) in the definition of “approval mark”, the words “motor” and “or any trailer” in sub-paragraph (b) shall be omitted; and

(b) for the definition of “British Standard mark”, there shall be substituted—

““British Standard mark” means—

(a)

the mark indicated in the specification for photometric and physical requirements for lighting equipment published by the British Standards Institution under the reference BS 6102: Part 3: 1986 namely “6102/3”; or

(b)

the mark indicated in the specification for photometric and physical requirements for lighting equipment published by the British Standards Institution under the reference BS 6102: Part 3: 1986 as amended by AMD 5821 published on the 29th April 1988, namely “6102/3”.”.