Commission Regulation (EU) No 1266/2009 (repealed)Show full title

1. Introductory Text

2. Article 1. . . . . . . . . . ....

3. Article 2. . . . . . . . . . ....

4. Signature

5. 1. ANNEX

      1. . . . . . . . . . ....

      2. 1. AMENDMENTS TO CHAPTER I (DEFINITIONS)

         1. 1.1 The definition (f) is replaced by the following:

         2. 1.2 The definition (l) is replaced by the following:

         3. 1.3 The definition (s) is replaced by the following:

         4. 1.4 In footnote (1) to definitions ‘n’ and ‘p’ the following...

      3. 2. AMENDMENTS TO CHAPTER II (GENERAL CHARACTERISTICS)

         1. 2.1 The following new Requirement is inserted after Requirement 001:

         2. 2.2 Requirement 010 is amended as follows:

         3. 2.3 The second indent of Requirement 011 is replaced by the...

      4. 3. AMENDMENTS TO CHAPTER III (FUNCTIONS AND REQUIREMENTS)

         1. 3.1 The following requirement is inserted after Requirement 019:

         2. 3.2 Requirement 028 is replaced by the following:

         3. 3.3 Requirement 029 is replaced by the following:

         4. 3.4 . . . . . . . . . ....

         5. 3.5 Requirement 038, Requirement 041 and Requirement 042 are replaced by...

         6. 3.6 Requirements 050, 050a and 050b are replaced by the following:...

         7. 3.7 Requirement 065 is replaced by the following:

         8. 3.8 The following text is inserted after Requirement 067:

         9. 3.9 In Requirement 094 the following line is inserted after ‘motion...

         10. 3.10 Requirement 104 is replaced by the following:

         11. 3.11 After Requirement 109a, the following requirement is inserted:

         12. 3.12 Requirement 114a is replaced by the following:

         13. 3.13 Requirement 121 is replaced by the following:

         14. 3.14 Requirement 127 is replaced by the following:

         15. 3.15 Requirement 133a is replaced by the following:

         16. 3.16 Requirement 136 is replaced by the following:

         17. 3.17 The following requirements are inserted after Requirement 136:

         18. 3.18 Requirement 141 is replaced by the following:

         19. 3.19 Requirement 145 is replaced by the following:

         20. 3.20 After Requirement 161, the following requirement is inserted:

      5. 4. AMENDMENTS TO CHAPTER V (INSTALLATION)

         1. 4.1 Requirement 239 shall have the following sentence added:

         2. 4.2 Requirement 243 is replaced by the following:

         3. 4.3 Requirement 248 and Requirement 249 are replaced by the following:...

         4. 4.4 Requirement 250, sixth indent is replaced by the following:

         5. 4.5 After Requirement 250 the following requirement is inserted:

      6. 5. AMENDMENTS TO CHAPTER VI (INSPECTIONS)

         1. 5.1 Requirement 257 is amended as follows:

         2. 5.2 The following requirements are inserted after Requirement 257:

      7. 6. AMENDMENTS TO CHAPTER VII (CARD ISSUING)

         1. 6.1 The following requirement is inserted after Requirement 268:

      8. 7. AMENDMENTS TO CHAPTER VIII (TYPE-APPROVAL)

         1. 7.1 In Section 1 General Points, a new sentence is added...

         2. 7.2 After Requirement 274, the following requirements are inserted:

         3. 7.3 After Requirement 275, the following requirement is inserted:

         4. 7.4 After Requirement 277, the following requirement is inserted:

         5. 7.5 Requirement 281 is replaced by:

      9. 8. AMENDMENTS TO APPENDIX 1 (DATA DICTIONARY)

         1. 8.1 Section 2.2 is replaced by the following:

         2. 8.2 In Section 2.54, the line ‘ “0A”H to “0F”H RFU’, is...

         3. 8.3 Section 2.70 is replaced with the following:

         4. 8.4 Section 2.114 is replaced with the following:

         5. 8.5 The last paragraph of Chapter 4 is replaced by the...

         6. 8.6 In Chapter 2, Section 2.67 is replaced by the following:...

         7. 8.7 Section 2.71 is replaced by the following:

         8. 8.8 Section 2.72 is replaced by the following:

      10. 9. AMENDMENTS TO APPENDIX 3 (PICTOGRAMS)

          1. 9.1 Requirement PIC_001 is replaced by:

          2. 9.2 Section 2, in the ‘Events’ sub-sub section, the following pictogram...

      11. 10. AMENDMENTS TO APPENDIX 4 (PRINTOUTS)

          1. 10.1 PRT_006 in Section 2, Data Block Specification, is replaced by:...

          2. 10.2 Section 3.1. Driver Activities from daily card printout is replaced...

          3. 10.3 Section 3.2 Driver Activities from daily VU printout is replaced...

      12. 11. AMENDMENTS TO APPENDIX 7 (DATA DOWNLOADING PROTOCOL)

          1. 11.1 The footnote in section 2.1 associated with download procedure, is...

      13. 12. AMENDMENTS TO APPENDIX 9 (TYPE APPROVAL – LIST OF MINIMUM...

          1. 12.1 In Chapter I the following ISO standard is added to...

          2. 12.2 In Chapter II VEHICLE UNIT FUNCTIONAL TESTS, the following new...

          3. 12.3 In Chapter II the following new requirement is added:

          4. 12.4 In Chapter III the following new requirement is added:

          5. 12.5 In Chapter III MOTION SENSOR FUNCTIONAL TESTS, the following new...

      14. 13. AMENDMENTS TO APPENDIX 12 (ADAPTOR FOR M1 and N1 VEHICLES)...