xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"
a Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports | |||||||||
Identification number of the additive | Name of the holder of authorisation | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
---|---|---|---|---|---|---|---|---|---|
mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | |||||||||
Category: Sensory additives. Functional group: Flavouring compounds | |||||||||
2b02017 | - | Cinnamyl alcohol | Additive composition Cinnamyl alcohol Characterisation of the active substance Cinnamyl alcohol Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C9H10O CAS number: 104-54-1 FLAVIS No: 02.017 Method of analysis a For the determination of cinnamyl alcohol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b02031 | - | 3-Phenylpropan-1-ol | Additive composition 3-Phenylpropan-1-ol Characterisation of the active substance 3-Phenylpropan-1-ol Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C9H12O CAS number: 122-97-4 FLAVIS No: 02.031 Method of analysis a For the determination 3-phenylpropan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b05038 | - | 2-Phenylpropanal | Additive composition 2-Phenylpropanal Characterisation of the active substance 2-Phenylpropanal Produced by chemical synthesis Purity: min. 95 % assay Chemical formula: C9H10O CAS number: 93-53-8 FLAVIS No: 05.038 Method of analysis a For the determination 2-phenylpropanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be: For cats: 1 mg/kg, and for other species and categories: 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %:
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded:
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves | 8.11.2030 |
2b05045 | - | 3-(p-Cumenyl)-2-methylpropionalde-hyde | Additive composition 3-(p-Cumenyl)-2-methylpropionalde-hyde Characterisation of the active substance 3-(p-Cumenyl)-2-methylpropionalde-hyde Produced by chemical synthesis Purity: min. 90 % assay Chemical formula: C13H18O CAS number: 103-95-7 FLAVIS No: 05.045 Method of analysis a For the determination of 3-(p-Cumenyl)-2-methylpropionalde-hyde in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b05050 | - | Alpha-methylcinnamaldehyde | Additive composition Alpha-methylcinnamaldehyde Characterisation of the active substance Alpha-methylcinnamaldehyde Produced by chemical synthesis Purity: min. 95 % assay Chemical formula: C10H10O CAS number: 101-39-3 FLAVIS No: 05.050 Method of analysis a For the determination of alpha-methylcinnamaldehyde in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b05080 | - | 3-Phenylpropanal | Additive composition 3-Phenylpropanal Characterisation of the active substance 3-Phenylpropanal Produced by chemical synthesis Purity: min. 95 % assay Chemical formula: C9H10O CAS number:104-53-0 FLAVIS No: 05.080 Method of analysis a For the determination of 3-phenylpropanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b08022 | - | Cinnamic acid | Additive composition Cinnamic acid Characterisation of the active substance Cinnamic acid Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C9H8O2 CAS number: 621-82-9 FLAVIS No: 08.022 Method of analysis a For the determination of cinnamic acid in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b09018 | - | Cinnamyl acetate | Additive composition Cinnamyl acetate Characterisation of the active substance Cinnamyl acetate Produced by chemical synthesis Purity: min.98 % assay Chemical formula: C11H12O2 CAS number: 103-54-8 FLAVIS No: 09.018 Method of analysis a For the determination of cinnamyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b09053 | - | Cinnamyl butyrate | Additive composition Cinnamyl butyrate Characterisation of the active substance Cinnamyl butyrate Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C13H16O2 CAS number: 103-61-7 FLAVIS No: 09.053 Method of analysis a For the determination of cinnamyl butyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b09428 | - | 3-Phenylpropyl isobutyrate | Additive composition 3-Phenylpropyl isobutyrate Characterisation of the active substance 3-Phenylpropyl isobutyrate Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C13H18O2 CAS number: 103-58-2 FLAVIS No: 09.428. Method of analysis a For the determination of 3-phenylpropyl isobutyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b09459 | - | Cinnamyl isovalerate | Additive composition Cinnamyl isovalerate Characterisation of the active substance Cinnamyl isovalerate Produced by chemical synthesis Purity: min. 95 % assay Chemical formula: C14H18O2 CAS number: 140-27-2 FLAVIS No: 09.459 Method of analysis a For the determination of cinnamyl isovalerate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b09470 | - | Cinnamyl isobutyrate | Additive composition Cinnamyl isobutyrate Characterisation of the active substance Cinnamyl isobutyrate Produced by chemical synthesis Purity: min. 96 % assay Chemical formula: C13H16O2 CAS number: 103-59-3 FLAVIS No: 09.470 Method of analysis a For the determination of cinnamyl isobutyrate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b09730 | - | Ethyl cinnamate | Additive composition Ethyl cinnamate Characterisation of the active substance Ethyl cinnamate Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C11H12O2 CAS number: 103-36-6 FLAVIS No: 09.730 Method of analysis a For the determination of ethyl cinnamate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b09740 | - | Methyl cinnamate | Additive composition Methyl cinnamate Characterisation of the active substance Methyl cinnamate Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C10H10O2 CAS number: 103-26-4 FLAVIS No: 09.740 Method of analysis a For the determination of methyl cinnamate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |
2b09742 | - | Isopentyl cinnamate | Additive composition Isopentyl cinnamate Characterisation of the active substance Isopentyl cinnamate Produced by chemical synthesis Purity: min. 97 % assay Chemical formula: C14H18O2 CAS number: 7779-65-9 FLAVIS No: 09.742 Method of analysis a For the determination of isopentyl cinnamate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species except marine animals | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. 3. The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %. 4. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’ 5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the following contents of the active substance in complete feedingstuff with a moisture content of 12 % are exceeded: 5 mg/kg 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. | 8.11.2030 |