Commission Delegated Regulation (EU) 2019/331Show full title

2. DETAILED ANNUAL DATA FOR EACH YEAR IN THE BASELINE PERIOD U.K.

2.1. Detailed annual verified emissions data at installation level U.K.

This item contains at least the following information:

(a)

For each source stream: Activity data, calculation factors used, fossil emissions, emissions from biomass, in case of fuels (including if used as process input) energy input calculated from the Net Calorific Value (NCV);

(b)

For each emission source for which continuous emission monitoring systems have been used: fossil emissions, emissions from biomass, annual hourly average of GHG concentration and flue gas flow; in case of CO₂: proxy data for energy input associated with the emissions;

(c)

Where a fall-back approach in accordance with Article 22 of Regulation (EU) No 601/2012 is used, the fossil and biomass emissions determined, proxy data for energy input associated with the emissions, if applicable;

(d)

The amount of transferred CO₂ imported and/or exported.

Member States may choose to allow operators to report only aggregated emission figures.

2.2. Annual emissions per sub-installation U.K.

This item contains a complete balance of emissions, identifying the quantity of emissions attributable to each sub-installation.

2.3. Annual installation-wide balance of heat import, production, consumption and export U.K.

This item contains at least the following information:

(a)

The total amount of energy input used in the installation contained in fuels;

(b)

If applicable, the energy content of imported waste gases;

(c)

If applicable, the amount of energy in fuels exported to other directly technically connected EU ETS installations or non-ETS entities;

(d)

If applicable, the energy content of waste gases exported to other EU ETS installations or non-ETS entities;

(e)

The amount of energy input from fuels used for electricity production;

(f)

The amount of energy input from fuels attributed to fuel benchmark sub-installations (reported separately for carbon leakage and non-carbon leakage fuel benchmark sub-installation);

(g)

The amount of fuel input used for production of measurable heat;

(h)

Total amount of measurable heat produced in the installation;

(i)

Net amount of measurable heat imported from installations covered by the EU ETS;

(j)

Net amount of measurable heat imported from installations and entities not covered by the EU ETS;

(k)

Net amount of measurable heat consumed for electricity production within the installation;

(l)

Net amount of measurable heat consumed for product benchmark sub-installations within the installation;

(m)

Net amount of measurable heat exported to EU ETS installations;

(n)

Net amount of measurable heat exported to installations or entities not covered by the EU ETS;

(o)

Net amount of measurable heat exported for the purpose of district heating;

(p)

Net amount of measurable heat attributable to heat benchmark sub-installations (reported separately for carbon leakage and non- carbon leakage heat benchmark and district heating sub-installations);

(q)

The amount of heat losses, if not already included in the data referred to in points (a) to (p).

2.4. Annual attribution of energy to sub-installations U.K.

This item contains at least the following information:

(a)

Amount of energy input from fuels, including their respective emissions factor, to:

• each product benchmark sub-installation;

• each heat benchmark and district heating sub-installation;

• each fuel benchmark sub-installation;

(b)

Amount of measurable heat imported:

• by each product benchmark sub-installation;

• from nitric acid product benchmark sub-installations;

• from sub-installations producing pulp;

(c)

Amount of measurable heat exported by:

• each product benchmark sub-installation.

2.5. Annual installation-wide balance of electricity import, production, consumption and export U.K.

This item contains at least the following information:

(a)

Total amount of electricity produced from fuels;

(b)

Total amount of other electricity produced;

(c)

Total amount of electricity imported from the grid or from other installations;

(d)

Total amount of electricity exported to the grid or to other installations;

(e)

Total amount of electricity consumed in the installation;

(f)

For electricity consumption within product benchmark sub-installations, which are listed in part 2 of Annex I, the amount of electricity consumed that qualifies as exchangeable.

Points (a) to (e) only have to be reported by installations that produce electricity.

2.6. Further annual data for sub-installations U.K.

This item contains at least the following information:

(a)

The amount of measurable heat attributed to sub-installation imported from non-EU ETS entities or processes;

(b)

If applicable, for each sub-installation, a list of products produced within the boundaries of the sub-installation, including their codes under the PRODCOM list referred to in Article 2(2) of Council Regulation (EEC) No 3924/91(1), based on NACE-4 codes referred to Regulation (EC) No 1893/2006 of the European Parliament and of the Council(2) (NACE rev. 2) and the amount of production. PRODCOM shall be at least as disaggregated as the related sub-sector identification in delegated acts adopted pursuant to Article 10b(5) of Directive 2003/87/EC;

(c)

By way of derogation from point (b), for the carbon leakage heat benchmark sub-installation, in case of export of measurable heat to installations or entities not covered by the EU ETS, the NACE-4 codes (NACE rev. 2) of those installations or entities;

(d)

If applicable and available to the operator, for each sub-installation, the emission factor of the fuel mix related to the measurable heat imported or exported;

(e)

If applicable, for each sub-installation, the quantity and emission factor of waste gases imported and exported;

(f)

If applicable, for each sub-installation, the energy content (net calorific value) of the waste gases imported and exported.

2.7. Annual activity data for product benchmark sub-installations U.K.

This item contains at least the following information:

(a)

Annual production data of the product as specified in Annex I, in the unit listed in that Annex;

(b)

A list of products produced within the boundaries of the sub-installation, including their PRODCOM codes (based on NACE rev. 2). PRODCOM shall be at least as disaggregated as the related sub-sector identification in delegated acts adopted pursuant to Article 10b(5) of Directive 2003/87/EC;

(c)

Amount of transferred CO₂ imported from or exported to other sub-installations, installations or other entities;

(d)

Amount of export or import of intermediate products covered by product benchmark sub-installations;

(e)

If applicable, for the refinery or aromatics product benchmark sub-installations, the annual throughput for each CWT function as specified in Annex II;

(f)

If applicable, for the lime or dolime product benchmark sub-installations, the uncorrected annual production quantity and the annual average values for m_CaO and m_MgO in accordance with Annex III;

(g)

If applicable, for the steam cracking product benchmark sub-installation, the total annual HVC production and the quantity of supplementary feed expressed as amounts of hydrogen, ethylene and other HVC;

(h)

If applicable, for the hydrogen or synthesis gas product benchmark sub-installations, the annual amount of hydrogen or synthesis gas production referred to hydrogen content expressed as norm cubic meters per year referring to 0 °C and 101,325 kPa and the annual production volume fraction of pure hydrogen in the hydrogen/carbon monoxide mixture;

(i)

If applicable, for the ethylene oxide/ethylene glycols product benchmark sub-installation, the annual production levels of ethylene oxide, monoethylene glycol, diethylene glycol and triethylene glycol;

(j)

If applicable, for the vinyl chloride monomer product benchmark sub-installation, the heat consumed stemming from hydrogen consumption;

(k)

If applicable, for the short fibre kraft pulp, long fibre kraft pulp, thermo-mechanical pulp and mechanical pulp, sulphite pulp product benchmark sub-installations or other pulp not covered by a product benchmark sub-installation, the annual production level of the respective pulp and the annual amount of pulp placed on the market and not processed into paper in the same or other technically connected installations;

(l)

If applicable, the amount, energy content and emission factor of waste gases produced within the system boundaries of the respective product benchmark sub-installation and flared within or outside the system boundaries of that product benchmark sub-installation, with the exception of safety flaring, and not used for the purpose of the production of measurable heat, non-measurable heat or electricity.

(1)

Council Regulation (EEC) No 3924/91 of 19 December 1991 on the establishment of a Community survey of industrial production (OJ L 374, 31.12.1991, p. 1).

(2)

Regulation (EC) No 1893/2006 of the European Parliament and of the Council of 20 December 2006 establishing the statistical classification of economic activities NACE Revision 2 and amending Council Regulation (EEC) No 3037/90 as well as certain EC Regulations on specific statistical domains (OJ L 393, 30.12.2006, p. 1).