xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"

  1. Introductory Text

  2. Article 1.Subject matter and scope

  3. Article 2.Definitions

  4. Article 3.Obligations of suppliers

  5. Article 4.Obligations of dealers

  6. Article 5.Obligations of internet hosting platforms

  7. Article 6.Measurement methods

  8. Article 7.Verification procedure for market surveillance purposes

  9. Article 8.Review

  10. Article 9.Repeal

  11. Article 10.Transitional measures

  12. Article 11.Entry into force and application

  13. Signature

    1. ANNEX I

      Definitions applicable for the Annexes

      1. The following definitions shall apply:

      2. ‘quick response (QR) code’ means a matrix barcode included on...

    2. ANNEX II

      Energy efficiency classes and airborne acoustical emission classes

      1. The energy efficiency class of refrigerating appliances shall be determined...

      2. The EEI of a refrigerating appliance shall be determined in...

    3. ANNEX III

      Label for refrigerating appliances

      1. 1. LABEL FOR REFRIGERATING APPLIANCES, EXCEPT FOR WINE STORAGE APPLIANCES

        1. 1.1. Label:

        2. 1.2. The following information shall be included in the label:

      2. 2. LABEL FOR WINE STORAGE APPLIANCES

        1. 2.1. Label:

        2. 2.2. The following information shall be included in the label:

      3. 3. LABEL DESIGNS

        1. 3.1. Label design for refrigerating appliances, except for wine storage appliances...

        2. 3.2. Label design for wine storage appliances

        3. 3.3. Whereby:

    4. ANNEX IV

      Measurement methods and calculations

      1. For the purposes of compliance and verification of compliance with...

      2. 1. General conditions for testing:

      3. 2. Storage conditions and target temperatures per compartment type:

      4. 3. Determination of the AE:

      5. 4. Determination of the standard annual energy consumption (SAE):

      6. 5. Determination of the EEI:

    5. ANNEX V

      Product information sheet

      1. Pursuant to point 1(b) of Article 3, the supplier shall...

    6. ANNEX VI

      Technical documentation

      1. 1. The technical documentation referred to in point 1(d) of Article...

      2. 2. Where the information included in the technical documentation for a...

    7. ANNEX VII

      Information to be provided in visual advertisements, in technical promotional material, in distance selling, except distance selling on the internet

      1. 1. In visual advertisements, for the purposes of ensuring conformity with...

      2. 2. In technical promotional material, for the purposes of ensuring conformity...

      3. 3. Any paper-based distance selling must show the energy efficiency class...

      4. 4. The energy efficiency class and the range of energy efficiency...

      5. 5. Telemarketing-based distance selling must specifically inform the customer of the...

      6. 6. For all the situations mentioned in points 1 to 3...

    8. ANNEX VIII

      Information to be provided in the case of distance selling through the internet

      1. 1. The appropriate label made available by suppliers in accordance with...

      2. 2. The image used for accessing the label in the case...

      3. 3. In the case of a nested display, the sequence of...

      4. 4. The electronic product information sheet made available by suppliers in...

    9. ANNEX IX

      Verification procedure for market surveillance purposes

      1. The verification tolerances set out in this Annex relate only...

      2. Where a model has been designed to be able to...

      3. When verifying the compliance of a product model with the...

      4. The Member State authorities shall verify one single unit of...

      5. The Member State authorities shall use the measurement and calculation...

      6. The Member State authorities shall only apply the verification tolerances...