Identifier

meta SPC 1: Dipping products - ready to use

Number

1-1

Product type(s)	PT03 - Veterinary hygiene (Disinfectants)

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
					Min	Max
Iodine		Active substance	7553-56-2	231-442-4	0,25	0,49
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy	Non active substance	68439-50-9		2,697	4,993

Formulation	AL - Any other liquid

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	Bacteria Yeasts Algae
Field(s) of use	Indoor Disinfection of teats of milk producing animals by dipping after milking
Application method(s)	Dipping Manual or automated disinfection of teats by dipping after milking. Dipping cup or automated dipping machine.
Application rate(s) and frequency	cows and buffaloes (3 to 10 ml: 5 ml recommended) sheep (1,5 to 5 ml: 1,5 ml recommended) goats (2,5 to 6 ml: 2,5 ml recommended) Frequency: 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 l HDPE DRUM 60, 120, 220 l HDPE CONTAINER 1 000 l

Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Fill the dipping cup manually or automatically with the ready to use product.

Apply by dipping manually or automatically on animal's teats on the full length of the teat after milking.

cows and buffaloes (3 to 10 ml: 5 ml recommended) sheep (1,5 to 5 ml: 1,5 ml recommended) goats (2,5 to 6 ml: 2,5 ml recommended)

Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes).

At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster.

Where necessary, repeat the application after each milking.

Clean the application equipment regularly with warm water.

Wear eye protection.

In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.

Take the contaminated clothes and shoes off immediately. Wash them before wearing them again.

FIRST AID INSTRUCTIONS

In the event of inhalation: Bring to fresh air. In the event of contact with the skin: Wash with water. In the event of contact with the eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.

Refer to the safety data sheet available for professional user: it contains an emergency phone number.

Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.

At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.

Shelf life: 2 years in HDPE

Do not store at a temperature higher than 30 °C.

Trade name(s)	Teatsan 2500 IODO GUARD 2500
Authorisation number	EU-0018496-0001 1-1
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Iodine		Active substance	7553-56-2	231-442-4	0,25
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy	Non active substance	68439-50-9		2,697

Identifier

meta SPC 2: Dipping, foaming, spraying products - Ready to use

Number

1-2

Product type(s)	PT03 - Veterinary hygiene (Disinfectants)

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
					Min	Max
Iodine		Active substance	7553-56-2	231-442-4	0,25	0,49
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy	Non active substance	68439-50-9		2,697	4,69

Formulation	AL - Any other liquid

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	Bacteria Yeasts
Field(s) of use	Indoor Disinfection of teats of milk producing animals by dipping, foaming or spraying before milking
Application method(s)	Dipping, foaming or spraying before milking Manual or automated disinfection of teats by dipping, foaming or spraying before milking Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency	cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended) sheep (1,5 to 5 ml: 1,5 to 3 ml recommended) goats (2,5 to 6 ml: 2,5 to 4 ml recommended) Frequency: 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 l HDPE DRUM 60, 120, 220 l HDPE CONTAINER 1 000 l

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	Bacteria Yeasts Algae
Field(s) of use	Indoor Disinfection of teats of milk producing animals by dipping, foaming or spraying after milking
Application method(s)	Dipping, foaming, spraying after milking Manual or automated disinfection of teats by dipping, foaming or spraying after milking. Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency	cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended) sheep (1,5 to 5 ml: 1,5 to 3 ml recommended) goats (2,5 to 6 ml: 2,5 to 4 ml recommended)
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 l HDPE DRUM 60, 120, 220 l HDPE CONTAINER 1 000 l

See use-specific instructions for each use.

Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping/foaming cup/sprayer manually or automatically with the ready to use product.

Where necessary repeat the application at each milking.

Clean the application equipment regularly with warm water.

See use-specific risk mitigation measures for each use.

Take the contaminated clothes and shoes off immediately. Wash them before wearing them again.

FIRST AID INSTRUCTIONS

In the event of inhalation: Bring to fresh air. In the event of contact with the skin: Wash with water. In the event of contact with the eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.

Refer to the safety data sheet available for professional user: it contains an emergency phone number.

Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.

At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.

Shelf life: 2 years in HDPE

Do not store at a temperature higher than 30 °C.

Trade name(s)	Teat Guard 2500 IODO SPRAY 2500
Authorisation number	EU-0018496-0002 1-2
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Iodine		Active substance	7553-56-2	231-442-4	0,25
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy	Non active substance	68439-50-9		2,697

Identifier

meta SPC 3: Dipping, foaming, spraying concentrated products

Number

1-3

Product type(s)	PT03 - Veterinary hygiene (Disinfectants)

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
					Min	Max
Iodine		Active substance	7553-56-2	231-442-4	2,5	2,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy	Non active substance	68439-50-9		24,199	24,199

Formulation	SL - Soluble concentrate

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	Bacteria Yeasts
Field(s) of use	Indoor Disinfection of teats of milk producing animals by dipping, foaming or spraying before milking
Application method(s)	Dipping, foaming, spraying Manual or automated disinfection of teats by dipping, foaming or spraying before milking. Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency	A dilution at 10 % (v/v) should be prepared Application rate for the diluted product: cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended) sheep (1,5 to 5 ml: 1,5 to 3 ml recommended) goats (2,5 to 6 ml: 2,5 to 4 ml recommended) Frequency: 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 l HDPE DRUM 60, 120, 220 l HDPE CONTAINER 1 000 l

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	Bacteria Yeasts Algae Viruses
Field(s) of use	Indoor Disinfection of teats of milk producing animals by dipping, foaming or spraying after milking
Application method(s)	Dipping, foaming, spraying – Manual or automated disinfection of teats by dipping, foaming or spraying after milking. Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency	For disinfection of bacteria, yeasts and algae a dilution at 10 % (v/v: 10 ml product, add water up to 100 ml) should be prepared. For disinfection of viruses a dilution at 20 % (v/v: 20 ml product, add water up to 100 ml) should be prepared Application rate for the diluted product: cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended) sheep (1,5 to 5 ml: 1,5 to 3 ml recommended) goats (2,5 to 6 ml: 2,5 to 4 ml recommended) Frequency: 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 l HDPE DRUM 60, 120, 220 l HDPE CONTAINER 1 000 l

See use-specific instructions for each use.

Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping/foaming cup/sprayer manually or automatically with the prepared dilution.

Where necessary, repeat the application at each milking

Clean the application equipment regularly with warm water.

See use-specific risk mitigation measures for each use

Take the contaminated clothes and shoes off immediately. Wash them before wearing them again.

In case of faintness, get medical advice/attention. Show this safety data sheet to the doctor.

FIRST AID INSTRUCTIONS

In the event of inhalation: Bring to fresh air. In the event of contact with the skin: Wash with water. In the event of contact with the eyes: Rinse at once with a soft stream of water for at least 15 minutes, eyes wide open. Remove contact lenses if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.

Refer to the safety data sheet available for professional user: it contains an emergency phone number.

Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.

At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.

Shelf life: 2 years in HDPE

Do not store at a temperature higher than 30 °C.

Trade name(s)	Teat Guard Concentrate 1:4 IODO GUARD CONCENTRATE 1:4
Authorisation number	EU-0018496-0003 1-3
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Iodine		Active substance	7553-56-2	231-442-4	2,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy	Non active substance	68439-50-9		24,199

Identifier

meta SPC 4: Dipping products reaching virucidal activity – Ready to use

Number

1-4

Product type(s)	PT03 - Veterinary hygiene (Disinfectants)

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
					Min	Max
Iodine		Active substance	7553-56-2	231-442-4	0,5	0,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy	Non active substance	68439-50-9		4,993	4,993

Formulation	AL - Any other liquid

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	Bacteria Yeasts Algae Viruses
Field(s) of use	Indoor Disinfection of teats of milk producing animals by dipping after milking
Application method(s)	Dipping - Manual or automated disinfection of teats by dipping after milking. Dipping cup or automated dipping machine.
Application rate(s) and frequency	cows and buffaloes (3 to 10 ml: 5 ml recommended) sheep (1,5 to 5 ml: 1,5 ml recommended) goats (2,5 to 6 ml: 2,5 ml recommended) Frequency: 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 l HDPE DRUM 60, 120, 220 l HDPE CONTAINER 1 000 l

Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended. Fill the dipping cup manually or automatically with the ready to use product.

Apply by dipping manually or automatically on animal's teats on the full length of the teat after milking.

cows and buffaloes (3 to 10 ml: 5 ml recommended) sheep (1,5 to 5 ml: 1,5 ml recommended) goats (2,5 to 6 ml: 2,5 ml recommended)

Leave the product until next milking. Keep the cows standing until the product has dried (at least 5 minutes).

At the next milking, use the teat cleaning and wiping method systematically before attaching the milking cluster.

Where necessary, repeat the application after each milking.

Clean the application equipment regularly with warm water.

Wear eye protection.

In case a combination of pre- and post-milking disinfection is necessary, using another biocidal product not containing iodine has to be considered for pre-milking disinfection.

Take the contaminated clothes and shoes off immediately. Wash them before wearing them again.

FIRST AID INSTRUCTIONS

In the event of inhalation: Bring to fresh air. In the event of contact with the skin: Wash with water. In the event of contact with the eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.

Refer to the safety data sheet available for professional user: it contains an emergency phone number.

Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.

At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.

Shelf life: 2 years in HDPE

Do not store at a temperature higher than 30 °C.

Trade name(s)	Teatsan 5000 IODO GUARD 5000
Authorisation number	EU-0018496-0004 1-4
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Iodine		Active substance	7553-56-2	231-442-4	0,5
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy	Non active substance	68439-50-9		4,993

Identifier

meta SPC 5: Dipping, foaming, spraying products 5 500 ppm – Ready to use

Number

1-5

Product type(s)	PT03 - Veterinary hygiene (Disinfectants)

Common name	IUPAC name	Function	CAS number	EC number	Content (%)
					Min	Max
Iodine		Active substance	7553-56-2	231-442-4	0,55	0,55
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy	Non active substance	68439-50-9		4,69	4,69

Formulation	AL - Any other liquid

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	Bacteria Yeasts
Field(s) of use	Indoor Disinfection of teats of milk producing animals by dipping, foaming or spraying before milking
Application method(s)	Dipping, foaming, spraying Manual or automated disinfection of teats by dipping, foaming or spraying before milking Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency	cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended) sheep (1,5 to 5 ml: 1,5 to 3 ml recommended) goats (2,5 to 6 ml: 2,5 to 4 ml recommended) Frequency: 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 l HDPE DRUM 60, 120, 220 l HDPE CONTAINER 1 000 l

Product Type	PT03 - Veterinary hygiene (Disinfectants)
Where relevant, an exact description of the authorised use	—
Target organism(s) (including development stage)	Bacteria Yeasts Algae Viruses
Field(s) of use	Indoor Disinfection of teats of milk producing animals by dipping, foaming or spraying after milking
Application method(s)	Dipping, foaming, spraying– Manual or automated disinfection of teats by dipping, foaming or spraying after milking. Dipping cup, foaming cup, teat sprayer, automated dipping machine, automated foaming machine or automated spraying machine
Application rate(s) and frequency	cows and buffaloes (3 to 10 ml: 5 to 8 ml recommended) sheep (1,5 to 5 ml: 1,5 to 3 ml recommended) goats (2,5 to 6 ml: 2,5 to 4 ml recommended) Frequency: 2 to 3 times per day
Category(ies) of users	Professional
Pack sizes and packaging material	HDPE JERRYCAN 5, 10, 22 l HDPE DRUM 60, 120, 220 l HDPE CONTAINER 1 000 l

See use-specific instructions for each use.

Always read the label or leaflet before use and follow all the instructions provided.

The product must be brought to a temperature above 20 °C before use.

The use of a dosing pump for filling the product into the application equipment is recommended.

Where necessary repeat the application at each milking.

Clean the application equipment regularly with warm water.

See use-specific risk mitigation measures for each use.

Take the contaminated clothes and shoes off immediately. Wash them before wearing them again.

FIRST AID INSTRUCTIONS

In the event of inhalation: Bring to fresh air. In the event of contact with the skin: Wash with water. In the event of contact with the eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. In the event of ingestion: Rinse mouth. Do NOT induce vomiting. Get medical advice.

Refer to the safety data sheet available for professional user: it contains an emergency phone number.

Large spillage: Mark out, dyke up with an inert absorbant and pump in an emergency tank. Keep in suitable, properly labelled and closed containers for disposal. Never return spills in original containers for re-use.

At the end of the treatment, dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.

The paper towels used for removing the product and drying the teats are disposed in the normal and domestic waste.

Shelf life: 2 years in HDPE

Do not store at a temperature higher than 30 °C.

Trade name(s)	Teat Guard 5500 IODO SPRAY 5500
Authorisation number	EU-0018496-0005 1-5
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
Iodine		Active substance	7553-56-2	231-442-4	0,55
Alcohols, C12-14, ethoxylated (11 mol EO average molar ratio)	Poly(oxy-1,2-ethanediyl), -C12-14-(even numbered)-alkyl-hydroxy	Non active substance	68439-50-9		4,69