3.1, Engine Identification ,,,,,,,,,
3.1.1,Engine type designation,,,,A01,A02,A03,A04,A05,
,,,,,,,,,,
3.2, Performance Parameters ,,,,,,,,,
3.2.1,Declared rated speed(s) (rpm):,X,,,2 200,2 200,2 000,1 800,1 800,
,,,,,,,,,,
3.10., Miscellaneous devices: Yes/No ,,,,,,,,,
3.10.1,Exhaust gas recirculation (EGR),,,,,,,,,
3.10.1.1.,Characteristics (cooled/uncooled, high pressure/low pressure, etc.):,,,X,,
…,…,…,…,…,…,


3.1, Engine Identification ,,,,,,,,,,
3.1.1.,Engine type designation,,,X,,,,,,,
3.1.2.,Engine type designation shown on engine marking: yes/no,,,X,,,,,,,
3.1.3.,Location of the statutory marking:,,,X,,,,,,,
3.1.4.,Method of attachment of the statutory marking:,,,X,,,,,,,
3.1.5.,Drawings of the location of the engine identification number (complete example with dimensions):,,,X,,,,,,,
3.2., Performance Parameters ,,,,,,,,,,
3.2.1.,Declared rated speed (rpm):,X,,,,,,,,,
3.2.1.1.,Fuel delivery/stroke (mm 3 ) for diesel engine, fuel flow (g/h) for other engines, at rated net power:,,,X,,,,,,,
3.2.1.2.,Declared rated net power (kW):,X,,,,,,,,,
3.2.2.,Maximum power speed(rpm):,,,X,,,,,,If different from rated speed,
3.2.2.1.,Fuel delivery/stroke (mm 3 ) for diesel engine, fuel flow (g/h) for other engines, at maximum net power:,,,X,,,,,,,
3.2.2.2.,Maximum net power (kW):,X,,X,,,,,,If different from rated power,
3.2.3.,Declared maximum torque speed (rpm):,X,,,,,,,,If applicable,
3.2.3.1.,Fuel delivery/stroke (mm 3 ) for diesel engine, fuel flow (g/h) for other engines, at maximum torque speed:,,,X,,,,,,,
3.2.3.2.,Declared maximum torque (Nm):,X,,,,,,,,If applicable,
3.2.4.,Declared 100 % test speed:,X,,,,,,,,If applicable,
3.2.5.,Declared Intermediate test speed:,X,,,,,,,,If applicable,
3.2.6.,Idle speed (rpm),X,,,,,,,,If applicable,
3.2.7.,Maximum no load speed (rpm):,X,,,,,,,,If applicable,
3.2.8.,Declared minimum torque (Nm),X,,,,,,,,If applicable,
3.3., Run-in procedure ,,,,,,,,,Optional at choice of manufacturer,
3.3.1.,Run in time:,X,,,,,,,,,
3.3.2.,Run-in cycle:,X,,,,,,,,,
3.4., Engine test ,,,,,,,,,,
3.4.1.,Specific fixture required: Yes/No,X,,,,,,,,For NRSh only,
3.4.1.1.,Description, including photographs and/or drawings, of the system for mounting the engine on the test bench including the power transmission shaft for connection to the dynamometer:,X,,,,,,,,,
3.4.2.,Exhaust mixing chamber permitted by manufacturer: Yes/No,X,,,,,,,,For NRSh only,
3.4.2.1.,Exhaust mixing chamber description, photograph and/or drawing:,X,,,,,,,,If applicable,
3.4.3.,Manufacturers chosen NRSC: RMC/Discrete mode,X,,,,,,,,,
3.4.4.,Additional NRSC: E2/D2/C1,X,,,,,,,,Only where additional cycles are declared in entries 1.12.1 or 1.12.2 of Part A,
3.4.5.,Number of pre-conditioning cycles prior to transient test,X,,,,,,,,If applicable, minimum 1,0,
 3.4.6. , Pre-conditioning for RMC NRSC: Steady-state operation/RMC: , X , , , , , , , , ,
 3.4.6.1. , In case of RMC, number of pre-conditioning RMC prior to RMC NRSC test , X , , , , , , , , Minimum 0,5 ,
3.5., Lubrication system ,,,,,,,,,,
3.5.1., Lubricant temperature ,,,,,,,,,If applicable,
3.5.1.1.,Minimum (deg. C):,X,,,,,,,,,
3.5.1.2.,Maximum (deg. C):,X,,,,,,,,,
3.6., Combustion Cylinder ,,,,,,,,,,
3.6.1.,Bore (mm):,,,X,,,,,,,
3.6.2.,Stroke (mm):,,,X,,,,,,,
3.6.3.,Number of cylinders:,,,X,,,,,,,
 3.6.4. , Engine total swept volume (cm   3   ): , , , X , , , , , , ,
 3.6.5. , Swept volume per cylinder as % of parent engine: , , , X , , , , , , If engine family ,
3.6.6.,Volumetric compression ratio:,,,X,,,,,,Specify tolerance,
3.6.7.,Combustion system description:,,,X,,,,,,,
3.6.8.,Drawings of combustion chamber and piston crown:,,,X,,,,,,,
3.6.9.,Minimum cross sectional area of inlet and outlet ports (mm 2 ):,,,X,,,,,,,
3.6.10., Valve timing ,,,,,,,,,,
3.6.10.1.,Maximum lift and angles of opening and closing in relation to dead centre or equivalent data:,,,X,,,,,,,
3.6.10.2.,Reference and/or setting range:,,,X,,,,,,,
3.6.10.3.,Variable valve timing system: Yes/No,,,X,,,,,,If applicable and where intake and/or exhaust,
3.6.10.3.1.,Type: continuous/(on/off),,,X,,,,,,,
3.6.10.3.2.,Cam phase shift angle:,,,X,,,,,,,
3.6.11., Porting configuration ,,,,,,,,,2-stroke only, if applicable,
3.6.11.1.,positon, size and number:,,,X,,,,,,,
3.7., Cooling system ,,,,,,,,,Complete relevant section,
3.7.1., Liquid cooling ,,,,,,,,,,
3.7.1.1.,Nature of liquid:,,,X,,,,,,,
3.7.1.2.,Circulating pumps: Yes/No,,,X,,,,,,,
3.7.1.2.1.,type(s):,,,X,,,,,,,
3.7.1.2.2.,Drive ratio(s):,,,X,,,,,,If applicable,
3.7.1.3.,Minimum coolant temperature at outlet (deg. C):,X,,,,,,,,,
3.7.1.4.,Maximum coolant temperature at outlet (deg. C):,X,,,,,,,,,
3.7.2., Air cooling ,,,,,,,,,,
3.7.2.1.,fan: Yes/No,,,X,,,,,,,
3.7.2.1.1.,type(s):,,,X,,,,,,,
3.7.2.1.2.,Drive ratio(s): …,,,X,,,,,,If applicable,
3.7.2.2.,Maximum temperature at reference point (deg. C):,,,X,,,,,,,
3.7.2.2.1.,Reference point location,,,X,,,,,,,
3.8., Aspiration ,,,,,,,,,,
3.8.1.,Maximum allowable intake depression at 100 % engine speed and at 100 % load (kPa),X,X,,,,,,,,
3.8.1.1.,With clean air cleaner:,X,X,,,,,,,,
3.8.1.2.,With dirty air cleaner:,X,X,,,,,,,,
3.8.1.3.,Location, of measurement:,X,X,,,,,,,,
3.8.2.,Pressure charger(s): Yes/No,,,X,,,,,,,
3.8.2.1.,Type(s):,,,X,,,,,,,
3.8.2.2.,Description and schematic diagram of the system (e.g. maximum charge pressure, waste gate, VGT, Twin turbo, etc.):,,,X,,,,,,,
 3.8.3. , Charge air cooler: Yes/No , X , X , , , , , , , ,
 3.8.3.1. , Type: air-air/air-water/other(specify) , , X , , , , , , , ,
3.8.3.2.,Maximum charge air cooler outlet temperature at 100 % speed and 100 % load (deg. C):,X,X,,,,,,,,
 3.8.3.3. ,Maximum allowable pressure drop across charge cooler at 100 % engine speed and at 100 % load (kPa):,X,X,,,,,,,,
3.8.4.,Intake throttle valve: Yes/No,,,X,,,,,,,
3.8.5.,Device for recycling crankcase gases: Yes/No,,,X,,,,,,,
3.8.5.1.,If yes, description and drawings:,,,X,,,,,,,
3.8.5.2.,If no, compliance with paragraph 6.10 of Annex VI to Delegated Regulation (EU) 2017/654: Yes/No,X,,,,,,,,,
3.8.6., Inlet path ,,,,,,,,, 2-stroke, NRS and NRSh only ,
3.8.6.1.,Description of inlet path, (with drawings, photographs and/or part numbers):,,,X,,,,,,,
3.8.7., Air filter ,,,X,,,,,, 2-stroke, NRS and NRSh only ,
3.8.7.1.,Type:,,,X,,,,,,,
3.8.8., Intake air-silencer ,,,,,,,,, 2-stroke, NRS and NRSh only ,
3.8.1.1.,Type:,,,X,,,,,,,
3.9., Exhaust system ,,,,,,,,,,
3.9.1.,Description of the exhaust system (with drawings, photos and/or part numbers as required):,,,X,,,,,, 2 stroke, NRS and NRSh only ,
3.9.2.,Maximum exhaust temperature (deg. C):,X,,,,,,,,,
3.9.3.,Maximum permissible exhaust backpressure at 100 % engine speed and at 100 % load (kPa):,X,X,,,,,,,,
3.9.3.1.,Location of measurement:,X,X,,,,,,,,
3.9.4.,Exhaust backpressure at loading level specified by manufacturer for variable restriction after-treatment at start of test (kPa):,X,,,,,,,,,
3.9.4.1.,Location and speed/load conditions:,X,,,,,,,,,
3.9.5.,Exhaust throttle valve: Yes/No,,,X,,,,,,,
3.10., Miscellaneous devices: Yes/No ,,,,,,,,,,
3.10.1., Exhaust gas recirculation (EGR) ,,,,,,,,,,
 3.10.1.1. , Characteristics: cooled/uncooled, high pressure/low pressure/other (specify): , , , X , , , , , , ,
3.10.2., Water injection ,,,,,,,,,,
3.10.2.1.,Operation principle:,,,X,,,,,,,
 3.10.3. , Air injection , , , , , , , , , ,
 3.10.3.1. , Operation principle: , , , X , , , , , , ,
 3.10.4. , Other(s) , , , , , , , , , ,
 3.10.4.1. , Type(s): , , , X , , , , , , ,
3.11., Exhaust after-treatment system ,,,,,,,,,,
3.11.1., Location ,,X,,,,,,,,
3.11.1.1.,Place(s) and maximum/minimum distance(s) from engine to first after-treatment device:,,X,,,,,,,,
3.11.1.2.,Maximum temperature drop from exhaust or turbine outlet to first after-treatment device (deg. C) if stated:,X,X,,,,,,,,
3.11.1.2.1.,Test conditions for measurement:,X,X,,,,,,,,
 3.11.1.3. , Minimum temperature at inlet to first after-treatment device (deg. C), if stated: , X , X , , , , , , , ,
 3.11.1.3.1. , Test conditions for measurement: , X , X , , , , , , , ,
3.11.2., Oxidation catalyst ,,,,,,,,,,
3.11.2.1.,Number of catalytic converters and elements:,,,X,,,,,,,
3.11.2.2.,Dimensions and volume of the catalytic converter(s):,,,X,,,,,,,
3.11.2.3.,Total charge of precious metals:,,,X,,,,,,,
3.11.2.4.,Relative concentration of each compound:,,,X,,,,,,,
3.11.2.5.,Substrate (structure and material):,,,X,,,,,,,
3.11.2.6.,Cell density:,,,X,,,,,,,
3.11.2.7.,Type of casing for the catalytic converter(s):,,,X,,,,,,,
3.11.3., Catalytic exhaust after-treatment system for NO x or three way catalyst ,,,,,,,,,,
3.11.3.1.,Type:,,,X,,,,,,,
3.11.3.2.,Number of catalytic converters and elements:,,,X,,,,,,,
3.11.3.3.,Type of catalytic action:,,,X,,,,,,,
3.11.3.4.,Dimensions and volume of the catalytic converter(s):,,,X,,,,,,,
3.11.3.5.,Total charge of precious metals:,,,X,,,,,,,
3.11.3.6.,Relative concentration of each compound:,,,X,,,,,,,
3.11.3.7.,Substrate (structure and material):,,,X,,,,,,,
3.11.3.8.,Cell density:,,,X,,,,,,,
3.11.3.9.,Type of casing for the catalytic converter(s):,,,X,,,,,,,
3.11.3.10.,Method of regeneration:,X,,X,,,,,,If applicable,
3.11.3.10.1.,Infrequent regeneration: Yes/No:,X,,,,,,,,If yes, complete section 3.11.6,
3.11.3.11.,Normal operating temperature range (deg. C):,X,X,,,,,,,,
3.11.3.12.,Consumable reagent: Yes/No,,,X,,,,,,,
3.11.3.12.1.,Type and concentration of reagent needed for catalytic action:,,,X,,,,,,,
3.11.3.12.2.,Lowest concentration of the active ingredient present in the reagent that does not activate warning system (CD min ) (%vol):,,,X,,,,,,,
3.11.3.12.3.,Normal operational temperature range of reagent:,,X,,,,,,,,
3.11.3.12.4.,International standard:,,X,X,,,,,,If applicable,
3.11.3.13.,NO x sensor(s): Yes/No,,,X,,,,,,,
3.11.3.13.1.,Type:,,,X,,,,,,,
3.11.3.13.2.,Location(s),,,X,,,,,,,
3.11.3.14.,Oxygen sensor(s): Yes/No,,,X,,,,,,,
3.11.3.14.1.,Type:,,,X,,,,,,,
3.11.3.14.2.,Location(s):,,,X,,,,,,,
3.11.4., Particulate after-treatment system ,,,,,,,,,,
3.11.4.1.,Type of filtration: wall-flow/ non-wall-flow/other (specify),,,X,,,,,,,
3.11.4.2.,Type:,,,X,,,,,,,
3.11.4.3.,Dimensions and capacity of the particulate after-treatment system:,,,X,,,,,,,
3.11.4.4.,Location place(s) and maximum and minimum distance(s) from engine:,,X,,,,,,,,
3.11.4.5.,Method or system of regeneration, description and/or drawing:,,,X,,,,,,,
3.11.4.5.1.,Infrequent regeneration: Yes/No,,,X,,,,,,If yes, complete section 3.11.6,
3.11.4.5.2.,Minimum exhaust gas temperature for initiating regeneration procedure (deg. C):,,,X,,,,,,,
3.11.4.6.,Catalytic coating: Yes/No,,,X,,,,,,,
3.11.4.6.1.,Type of catalytic action:,,,X,,,,,,,
3.11.4.7.,Fuel borne catalyst (FBC): Yes/No,,,X,,,,,,,
3.11.4.8.,Normal operating temperature range (deg. C):,,,X,,,,,,,
3.11.4.9.,Normal operating pressure range (kPa),,,X,,,,,,,
3.11.4.10.,Storage capacity soot/ash [g]:,,,X,,,,,,,
3.11.4.11.,Oxygen sensor(s): Yes/No,,,X,,,,,,,
3.11.4.11.1.,Type:,,,X,,,,,,,
3.11.4.11.2.,Location(s):,,,X,,,,,,,
3.11.5., Other after-treatment devices ,,,,,,,,,,
3.11.5.1.,Description and operation:,,,X,,,,,,,
3.11.6., Infrequent Regeneration ,,,,,,,,,,
3.11.6.1.,Number of cycles with regeneration,X,,,,,,,,,
3.11.6.2.,Number of cycles without regeneration,X,,,,,,,,,
 3.11.7. , Other device(s) or feature(s) , , , , , , , , , ,
 3.11.7.1. , Type(s): , , , X , , , , , , ,
3.12., Fuel feed for liquid-fuelled CI or, where applicable, dual-fuel engines ,,,,,,,,,,
3.12.1., Feed pump ,,,,,,,,,,
3.12.1.1.,Pressure (kPa) or characteristic diagram:,,,X,,,,,,,
3.12.2., Injection system ,,,,,,,,,,
3.12.2.1.,Pump,,,,,,,,,,
3.12.2.1.1.,Type(s):,,,X,,,,,,,
3.12.2.1.2.,Rated pump speed (rpm):,,,X,,,,,,,
3.12.2.1.3.,mm 3 per stroke or cycle at full injection at rated pump speed:,,,X,,,,,,Specify tolerance,
3.12.2.1.4.,Torque peak pump speed (rpm):,,,X,,,,,,,
3.12.2.1.5.,mm 3 per stroke or cycle at full injection at torque peak pump speed,,,X,,,,,,Specify tolerance,
3.12.2.1.6.,Characteristic diagram:,,,X,,,,,,As alternative to entries 3.12.2.1.1 to 3.12.2.1.5.,
3.12.2.1.7.,Method used: on engine/on pump bench,,,X,,,,,,,
3.12.2.2., Injection timing ,,,,,,,,,,
3.12.2.2.1.,Injection timing curve:,,,X,,,,,,Specify tolerance, if applicable,
3.12.2.2.2.,Static Timing:,,,X,,,,,,Specify tolerance,
3.12.2.3., Injection piping ,,,,,,,,,,
3.12.2.3.1.,Length(s) (mm):,,,X,,,,,,,
3.12.2.3.2.,Internal diameter (mm):,,,X,,,,,,,
3.12.2.4.,Common rail: Yes/No,,,X,,,,,,,
3.12.2.4.1.,Type:,,,X,,,,,,,
3.12.3., Injector(s) ,,,,,,,,,,
3.12.3.1.,Type(s):,,,X,,,,,,,
3.12.3.2.,Opening pressure (kPa):,,,X,,,,,,Specify tolerance,
3.12.4.,ECU: Yes/No,,,X,,,,,,,
3.12.4.1.,Type(s):,,,X,,,,,,,
3.12.4.2.,Software calibration number(s):,,,X,,,,,,,
3.12.4.3.,Communication standard(s) for access to data stream information: ISO 27145 with ISO 15765-4 (CAN-based)/ISO 27145 with ISO 13400 (TCP/IP-based)/SAE J1939-73,X,,X,,,,,,,
3.12.5., Governor ,,,,,,,,,,
3.12.5.1.,Type(s):,,,X,,,,,,,
3.12.5.2.,Speed at which cut-off starts under full load:,,,X,,,,,,Specify range,if applicable,
3.12.5.3.,Maximum no-load speed:,,,X,,,,,,Specify range,if applicable,
3.12.5.4.,Idle speed:,,,X,,,,,,Specify range,if applicable,
3.12.6.,Cold-start system: Yes/No,,,X,,,,,,,
3.12.6.1.,Type(s):,,,X,,,,,,,
3.12.6.2.,Description:,,,X,,,,,,,
3.12.7., Fuel temperature at the inlet to the fuel injection pump ,,,,,,,,,,
3.12.7.1.,Minimum (deg. C):,X,,,,,,,,,
3.12.7.2.,Maximum (deg. C):,X,,,,,,,,,
3.13., Fuel feed for liquid fuel spark ignition engine ,,,,,,,,,,
3.13.1., Carburettor ,,,,,,,,,,
3.13.1.1.,Type(s):,,,X,,,,,,,
3.13.2., Port fuel injection: ,,,,,,,,,,
3.13.2.1.,single-point / multi-point,,,X,,,,,,,
3.13.2.2.,Type(s):,,,X,,,,,,,
3.13.3., Direct injection: ,,,,,,,,,,
3.13.3.1.,Type(s):,,,X,,,,,,,
3.13.4., Fuel temperature at location specified by manufacturer ,,,,,,,,,,
3.13.4.1.,Location:,X,,,,,,,,,
3.13.4.2.,Minimum (deg. C),X,,,,,,,,,
3.13.4.3.,Maximum (deg. C),X,,,,,,,,,
3.14., Fuel feed for gaseous fuel engines or where applicable, dual fuel engines (in the case of systems laid out in a different manner, supply equivalent information) ,,,,,,,,,,
3.14.1.,Fuel: LPG /NG-H/NG-L /NG-HL/LNG/Fuel specific LNG,X,,X,,,,,,,
 3.14.2. ,  Pressure regulator(s)/vaporiser(s)  , , , , , , , , , ,
3.14.2.1.,Type(s),,,X,,,,,,,
3.14.2.2.,Number of pressure reduction stages,,,X,,,,,,,
3.14.2.3.,Pressure in final stage minimum and maximum. (kPa),,,X,,,,,,,
3.14.2.4.,Number of main adjustment points:,,,X,,,,,,,
3.14.2.5.,Number of idle adjustment points:,,,X,,,,,,,
3.14.3.,Fuelling system: mixing unit/gas injection/liquid injection/direct injection,,,X,,,,,,,
3.14.3.1., Mixture strength regulation ,,,,,,,,,,
3.14.3.1.1.,System description and/or diagram and drawings:,,,X,,,,,,,
3.14.4., Mixing unit ,,,,,,,,,,
3.14.4.1.,Number:,,,X,,,,,,,
3.14.4.2.,Type(s):,,,X,,,,,,,
3.14.4.3.,Location:,,,X,,,,,,,
3.14.4.4.,Adjustment possibilities:,,,X,,,,,,,
3.14.5., Inlet manifold injection ,,,,,,,,,,
3.14.5.1.,Injection: single-point/multi-point,,,X,,,,,,,
3.14.5.2.,Injection: continuous/simultaneously timed/ sequentially timed,,,X,,,,,,,
3.14.5.3., Injection equipment ,,,,,,,,,,
3.14.5.3.1.,Type(s):,,,X,,,,,,,
3.14.5.3.2.,Adjustment possibilities:,,,X,,,,,,,
3.14.5.4., Supply pump ,,,,,,,,,If applicable,
3.14.5.4.1.,Type(s):,,,X,,,,,,,
3.14.5.5., Injector(s) ,,,,,,,,,,
3.14.5.5.1.,Type(s):,,,X,,,,,,,
3.14.6., Direct injection ,,,,,,,,,,
3.14.6.1.,Injection pump/pressure regulator,,,X,,,,,,,
3.14.6.1.1.,Type(s):,,,X,,,,,,,
3.14.6.1.2.,Injection timing (specify):,,,X,,,,,,,
3.14.6.2., Injector(s) ,,,,,,,,,,
3.14.6.2.1.,Type(s):,,,X,,,,,,,
3.14.6.2.2.,Opening pressure or characteristic diagram:,,,X,,,,,,,
3.14.7., Electronic Control Unit (ECU) ,,,,,,,,,,
3.14.7.1.,Type(s):,,,X,,,,,,,
3.14.7.2.,Adjustment possibilities:,,,X,,,,,,,
3.14.7.3.,Software calibration number(s):,,,X,,,,,,,
3.14.8., Approvals of engines for several fuel compositions ,,,,,,,,,,
3.14.8.1.,Self-adaptive feature: Yes/No,X,X,X,,,,,,,
3.14.8.2.,Calibration for a specific gas composition: NG-H/NG-L/NG-HL/ LNG/Fuel specific LNG,X,X,X,,,,,,,
3.14.8.3.,Transformation for a specific gas composition: NG-HT/NG-LT/NG-HLT,X,X,X,,,,,,,
3.14.9., Fuel temperature pressure regulator final stage ,,,,,,,,,,
3.14.9.1.,Minimum (deg. C):,X,,,,,,,,,
3.14.9.2.,Maximum (deg. C):,X,,,,,,,,,
3.15., Ignition system ,,,,,,,,,,
3.15.1., Ignition coil(s) ,,,,,,,,,,
3.15.1.1.,Type(s):,,,X,,,,,,,
3.15.1.2.,Number:,,,X,,,,,,,
3.15.2., Spark plug(s) ,,,,,,,,,,
3.15.2.1.,Type(s):,,,X,,,,,,,
3.15.2.2.,Gap setting:,,,X,,,,,,,
3.15.3., Magneto ,,,X,,,,,,,
3.15.3.1.,Type(s):,,,X,,,,,,,
3.15.4.,Ignition timing control: Yes/No,,,X,,,,,,,
3.15.4.1.,Static advance with respect to top dead centre (crank angle degrees):,,,X,,,,,,,
3.15.4.2.,Advance curve or map:,,,X,,,,,,If applicable,
3.15.4.3.,Electronic control: Yes/No,,,X,,,,,,,