- Latest available (Revised)
- Original (As adopted by EU)
Commission Implementing Regulation (EU) 2017/656 of 19 December 2016 laying down the administrative requirements relating to emission limits and type-approval of internal combustion engines for non-road mobile machinery in accordance with Regulation (EU) 2016/1628 of the European Parliament and of the Council (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
This version of this Regulation was derived from EUR-Lex on IP completion day (31 December 2020 11:00 p.m.). It has not been amended by the UK since then. Find out more about legislation originating from the EU as published on legislation.gov.uk.![]()
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1.Technical services shall use the single format set out in Annex VI to this Regulation when drawing up the test reports referred to in Article 6(3)(g) and Articles 22(6) and 23(3)(a)of Regulation (EU) 2016/1628.
2.Existing test reports for engines of category RLL issued under Directive 97/68/EC may be submitted for the purposes of type-approval under Regulation (EU) 2016/1628 under the condition that neither the substantive requirements nor the requirements regarding the test procedures have changed since the execution of the test. The difference between the per cent load and power and between the weighting factor for the mode number (mode no) of the test cycle given in section 3.7.1.4 of Annex III to Directive 97/68/EC and the corresponding mode number for test cycle F in Appendix 1 to Annex XVII of Commission Delegated Regulation (EU) 2017/654(1) shall not be considered substantive for this purpose.
3.Existing test reports for engines meeting the Special Purpose engine (SPE) emission limit values issued under Directive 97/68/EC or the test report of an equivalent type approval referred to in Annex XII to Directive 97/68/EC may be submitted for the purposes of type-approval under Regulation (EU) 2016/1628 under the condition that neither the substantive requirements nor the requirements regarding the test procedures have changed since the execution of the test.
4.Existing test reports for engines meeting the NRSh emission limit values issued under Directive 97/68/EC may be submitted for the purposes of type-approval under Regulation (EU) 2016/1628 under the condition that neither the substantive requirements nor the requirements regarding the test procedures have changed since the execution of the test.
Commission Delegated Regulation (EU) 2017/654 of 19 December 2016 supplementing Regulation (EU) 2016/1628 of the European Parliament and of the Council with regard to technical and general requirements relating to emission limits and type-approval for internal combustion engines for non-road mobile machinery (see page 1 of this Official Journal).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: