ANNEX VI

VERIFYING TRANSMISSION, TORQUE CONVERTER, OTHER TORQUE TRANSFERRING COMPONENT AND ADDITIONAL DRIVELINE COMPONENT DATA
Appendix 2

Transmission information document
Information document no.: | Issue: Date of issue: Date of Amendment:
pursuant to …
Transmission type/family (if applicable):
…
0.

GENERAL
0.1.
Name and address of manufacturer
0.2.
Make (trade name of manufacturer):
0.3.
Transmission type:
0.4.
Transmission family:
0.5.
Transmission type as separate technical unit/Transmission family as separate technical unit
0.6.
Commercial name(s) (if available):
0.7.
Means of identification of model, if marked on the transmission:
0.8.
In the case of components and separate technical units, location and method of affixing of the GB approval mark:
0.9.
Name(s) and address(es) of assembly plant(s):
0.10.
Name and address of the manufacturer's representative:
PART 1

ESSENTIAL CHARACTERISTICS OF THE (PARENT) TRANSMISSION AND THE TRANSMISSION TYPES WITHIN A TRANSMISSION FAMILY
| Parent transmission | Family members |
or transmission type |
| #1 | #2 | #3 |
0.0

GENERAL
0.1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
0.9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.0

SPECIFIC TRANSMISSION/TRANSMISSION FAMILY INFORMATION
1.1
Gear ratio. Gearscheme and powerflow
1.2
Center distance for countershaft transmissions
1.3
Type of bearings at corresponding positions (if fitted)
1.4
Type of shift elements (tooth clutches, including synchronisers or friction clutches) at corresponding positions (where fitted)
1.5
Single gear width for Option 1 or Single gear width ± 1 mm for Option 2 or Option 3
1.6
Total number of forward gears
1.7
Number of tooth shift clutches
1.8
Number of synchronizers
1.9
Number of friction clutch plates (except for single dry clutch with 1 or 2 plates)
1.10
Outer diameter of friction clutch plates (except for single dry clutch with 1 or 2 plates)
1.11
Surface roughness of the teeth (incl. drawings)
1.12
Number of dynamic shaft seals
1.13
Oil flow for lubrication and cooling per transmission input shaft revolution
1.14
Oil viscosity at 100 °C (± 10 %)
1.15
System pressure for hydraulically controlled gearboxes
1.16
Specified oil level in reference to central axis and in accordance with the drawing specification (based on average value between lower and upper tolerance) in static or running condition. The oil level is considered as equal if all rotating transmission parts (except for the oil pump and the drive thereof) are located above the specified oil level
1.17
Specified oil level (± 1 mm)
1.18
Gear ratios [-] and maximum input torque [Nm], maximum input power (kW) and maximum input speed [rpm]
- 1 gear
- 2 gear
- 3 gear
- 4 gear
- 5 gear
- 6 gear
- 7 gear
- 8 gear
- 9 gear
- 10 gear
- 11 gear
- 12 gear
- n gear

LIST OF ATTACHMENTS
No.: | Description: | Date of issue:
1 | Information on Transmission test conditions | …
2 | … |
Attachment 1 to Transmission information document

Information on test conditions (if applicable)
1.1 Measurement with retarder | yes/no
1.2 Measurement with angle drive | yes/no
1.3 Maximum tested input speed [rpm] |
1.4 Maximum tested input torque [Nm] |
Substituted by Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance).
Deleted by Commission Regulation (EU) 2019/318 of 19 February 2019 amending Regulation (EU) 2017/2400 and Directive 2007/46/EC of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles (Text with EEA relevance).
Words in Annex 6 Appendix 2 point 0.8 substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 83(5)(d)