Article 4U.K.Accessibility, exchange and reuse of static travel and traffic data

1.Transport authorities, transport operators, infrastructure managers or transport on demand service providers shall provide the static travel and traffic data and historic traffic data listed in point 1 of the Annex, of the different transport modes by using:

(a)for the road transport, the standards defined in Article 4 of Delegated Regulation (EU) 2015/962;

(b)for other transport modes, the use of one of the following standards and technical specifications: NeTEx CEN/TS 16614 and subsequent versions, technical documents defined in Regulation (EU) No 454/2011 and subsequent versions, technical documents elaborated by IATA or any machine-readable format fully compatible and interoperable with those standards and technical specifications;

(c)for the spatial network the requirements defined in Article 7 of Directive 2007/2/EC.

2.The relevant static travel and traffic data listed in point 1 of the Annex that are applicable to NeTEx and DATEX II shall be represented through minimum national profiles

3.Transport authorities, transport operators, infrastructure managers or transport on demand service providers shall provide the static travel and traffic data through the national access point in the required formats in line with the following timetable:

(a)for the travel and traffic data set out in point 1.1 of the Annex for the comprehensive TEN-T network, by 1 December 2019 at the latest;

(b)for the travel and traffic data set out in point 1.2 of the Annex for the comprehensive TEN-T network, by 1 December 2020 at the latest;

(c)for the travel and traffic data set out in point 1.3 of the Annex for the comprehensive TEN-T network, by 1 December 2021 the latest;

(d)for the travel and traffic data set out in points 1.1, 1.2 and 1.3 of the Annex for the other parts of the Union transport network, by 1 December 2023 at the latest.

4.APIs that provide access to static travel and traffic data listed in the Annex via the national access point shall be publicly accessible allowing users and end-users to register to obtain access.