Search Legislation

Commission Regulation (EU) 2017/1151Show full title

Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance)

 Help about what version

What Version

Close

This is a legislation item that originated from the EU

After exit day there will be three versions of this legislation to consult for different purposes. The legislation.gov.uk version is the version that applies in the UK. The EU Version currently on EUR-lex is the version that currently applies in the EU i.e you may need this if you operate a business in the EU.

The web archive version is the official version of this legislation item as it stood on exit day before being published to legislation.gov.uk and any subsequent UK changes and effects applied. The web archive also captured associated case law and other language formats from EUR-Lex.

Changes to legislation:

There are currently no known outstanding effects for the Commission Regulation (EU) 2017/1151. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

  1. Introductory Text

  2. Article 1.Subject matter

  3. Article 2.Definitions

  4. Article 3.Requirements for type-approval

  5. Article 4.Requirements for type-approval regarding the OBD system

  6. Article 4a. Requirements for type-approval regarding devices for monitoring the consumption of fuel and/or electric energy

  7. Article 5.Application for EC type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information

  8. Article 6.Administrative provisions for EC type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information

  9. Article 7.Amendments to type-approvals

  10. Article 8.Conformity of production

  11. Article 9.In service conformity

  12. Article 10.Pollution control devices

  13. Article 11.Application for EC type-approval of a type of replacement pollution control device as a separate technical unit

  14. Article 12.Administrative provisions for EC type-approval of replacement pollution control device as separate technical unit

  15. Article 13.Access to vehicle OBD and vehicle repair and maintenance information

  16. Article 14.Compliance with the obligations regarding access to vehicle OBD and vehicle repair and maintenance information

  17. Article 15.Transitional provisions

  18. Article 16.Amendments to Directive 2007/46/EC

  19. Article 17.Amendments to Regulation (EC) No 692/2008

  20. Article 18.Amendments to Commission Regulation (EU) No 1230/2012

  21. Article 18bis. Hybrid and plug-in hybrid vehicles

  22. Article 19.Repeal

  23. Article 20.Entry into force and application

  24. Signature

    1. ANNEX I

      ADMINISTRATIVE PROVISIONS FOR EC TYPE-APPROVAL

      1. 1. ADDITIONAL REQUIREMENTS FOR GRANTING OF EC TYPE-APPROVAL

        1. 1.1. Additional requirements for mono fuel gas vehicles, and bi-fuel gas...

          1. 1.1.1. The additional requirements for granting of type-approval for mono fuel...

          2. 1.1.2. The reference in paragraphs 3.1.2. and 3.1.4. of Annex 12...

          3. 1.1.3. For LPG or NG, the fuel to be used shall...

        2. 1.2. Additional requirements for flex fuel vehicles

      2. 2. ADDITIONAL TECHNICAL REQUIREMENTS AND TESTS

        1. 2.1. Small volume manufacturers

          1. 2.1.1. List of legislative acts referred to in Article 3(3):

        2. 2.2. Inlets to fuel tanks

          1. 2.2.1. The requirements for inlets to fuel tanks shall be those...

          2. 2.2.2. Provision shall be made to prevent excess evaporative emissions and...

        3. 2.3. Provisions for electronic system security

          1. 2.3.1. Any vehicle with an emission control computer shall include features...

          2. 2.3.2. Computer-coded engine operating parameters shall not be changeable without the...

          3. 2.3.3. At the request of the manufacturer, the approval authority may...

          4. 2.3.4. Manufacturers using programmable computer code systems shall take the necessary...

          5. 2.3.5. In the case of mechanical fuel-injection pumps fitted to compression-ignition...

          6. 2.3.6. Manufacturers shall effectively deter reprogramming of the odometer readings, in...

        4. 2.4. Application of tests

          1. 2.4.1. Figure I.2.4 illustrates the application of the tests for type-approval...

            1. Figure I.2.4 Application of test requirements for type-approval and extensions

      3. 3. EXTENSIONS TO TYPE-APPROVALS

        1. 3.1. Extensions for tailpipe emissions (type 1 and type 2 tests)...

          1. 3.1.1. The type-approval shall be extended to vehicles if they conform...

            1. 3.1.1.1. The type-approval shall not be extended to create an interpolation...

          2. 3.1.2. Vehicles with periodically regenerating systems

        2. 3.2. Extensions for evaporative emissions (type 4 test)

          1. 3.2.1. For tests performed in accordance with Annex 6 to UN/ECE...

          2. 3.2.2. For tests performed according Annex VI [2 days WLTP] the...

          3. 3.2.3. The type-approval shall be extended to vehicles with:

        3. 3.3. Extensions for durability of pollution control devices (type 5 test)...

          1. 3.3.1. The type-approval shall be extended to different vehicle types, provided...

            1. 3.3.1.1. Vehicle:

            2. 3.3.1.2. Engine

            3. 3.3.1.3. Pollution control system parameters:

            4. 3.3.1.4. The durability test may be carried out using a vehicle,...

        4. 3.4. Extensions for on-board diagnostics

          1. 3.4.1. The type-approval shall be extended to different vehicles with identical...

        5. 3.5 Extensions for low temperature test (type 6 test)

          1. 3.5.1. Vehicles with different reference masses

            1. 3.5.1.1. The type-approval shall be extended only to vehicles with a...

            2. 3.5.1.2. For category N vehicles, the approval shall be extended only...

          2. 3.5.2. Vehicles with different overall transmission ratios

            1. 3.5.2.1. The type-approval shall be extended to vehicles with different transmission...

            2. 3.5.2.2. To determine whether type-approval can be extended, for each of...

            3. 3.5.2.3. If, for each transmission ratio, E ≤ 8 %, the extension...

            4. 3.5.2.4. If, for at least one transmission ratio, E > 8 %,...

          3. 3.5.3. Vehicles with different reference masses and transmission ratios

      4. 4. CONFORMITY OF PRODUCTION

        1. 4.1. Introduction

          1. 4.1.1. Every vehicle produced under a Type Approval according to this...

          2. 4.1.2. The manufacturer shall check the conformity of production by testing...

          3. 4.1.3. For the purposes of the manufacturer's conformity of production check,...

            1. 4.1.3.1. COP family criteria

              1. 4.1.3.1.1. For Category M vehicles and for Category N1 class I...

              2. 4.1.3.1.2 For Category N1 Class III and Category N2 vehicles, only...

          4. 4.1.4. The frequency for product verification performed by the manufacturer shall...

          5. 4.1.5. The Approval Authority which has granted type-approval may at any...

          6. 4.1.6. The normal frequency of physical test verifications by the Approval...

          7. 4.1.7. The Approval Authority shall report the results of all audit...

          8. 4.1.8. In case of non-conformity Article 30 of Directive 2007/46/EC shall...

        2. 4.2. Checking the conformity of the vehicle for a type 1...

          1. 4.2.1. The Type 1 test shall be carried out on production...

          2. 4.2.2. A sample of three vehicles shall be selected at random...

            1. 4.2.2.1. . . . . . . . . . ....

          3. 4.2.3. The statistical method for calculating the test criteria is described...

          4. 4.2.4. At the request of the manufacturer and with the acceptance...

            1. 4.2.4.1. In order to establish a measured evolution coefficient with a...

            2. 4.2.4.2. All these tests shall be conducted with commercial fuel. However,...

            3. 4.2.4.3. When checking the conformity of production for CO2, as an...

          5. 4.2.5 Tests for conformity of production of vehicles fuelled by LPG...

          6. 4.2.6. Vehicles fitted with eco-innovations

            1. 4.2.6.1. In the case of a vehicle type fitted with one...

        3. 4.3. PEVs

          1. 4.3.1 Measures to ensure the conformity of production with regard to...

          2. 4.3.2. Electric energy consumption verification for conformity of production

            1. 4.3.2.1. During the conformity of production procedure, the break-off criterion for...

            2. 4.3.2.2. During this first applicable WLTP test cycle, the DC energy...

            3. 4.3.2.3. The value determined according to paragraph 4.3.2.2 shall be compared...

            4. 4.3.2.4. Conformity for EC shall be checked using the statistical procedures...

        4. 4.4. OVC-HEVs

          1. 4.4.1. Measures to ensure the conformity of production with regard to...

          2. 4.4.2. CO2 mass emission verification for conformity of production

            1. 4.4.2.1. The vehicle shall be tested according to the charge-sustaining Type...

            2. 4.4.2.2. During this test, the charge-sustaining CO2 mass emission shall be...

            3. 4.4.2.3. Conformity for CO2 emissions shall be checked using the statistical...

          3. 4.4.3. Electric energy consumption verification for conformity of production

            1. 4.4.3.1. During the conformity of production procedure, the end of the...

            2. 4.4.3.2. During this first applicable WLTP test cycle, the DC energy...

            3. 4.4.3.3. The value determined in accordance with point 4.4.3.2. shall be...

            4. 4.4.1.4. Conformity for EC shall be checked using the statistical procedures...

        5. 4.5. Checking the conformity of the vehicle for a Type 3...

          1. 4.5.1. If a verification of the Type 3 test is to...

        6. 4.6. Checking the conformity of the vehicle for a Type 4...

          1. 4.6.1. If a verification of the Type 4 test is to...

        7. 4.7. Checking the conformity of the vehicle for On-board Diagnostics (OBD)...

          1. 4.7.1. If a verification of the performance of the OBD system...

  25. ATTACHMENTS

    1. Appendix 1

    2. Appendix 2

    3. Appendix 3

    4. Appendix 3a

    5. Appendix 3b

    6. Appendix to information document

    7. Appendix 4

    8. Addendum to EC type-approval certificate No … concerning the type-approval of a vehicle with regard to emissions and access to vehicle repair and maintenance information according to Regulation (EC) No 715/2007

    9. Appendix to the Addendum to the Type Approval Certificate

    10. Appendix 5

    11. Appendix 6

    12. Appendix 7

    13. Appendix 8a

    14. Appendix 8b

    15. Appendix 8c

    16. Appendix 8d

    17. ANNEX II

    18. ANNEX III

    19. ANNEX IIIA

    20. Appendix 1

    21. Appendix 2

    22. Appendix 3

    23. Appendix 4

    24. Appendix 5

    25. Appendix 6

    26. Appendix 7

    27. Appendix 7b

    28. Appendix 7c

    29. Appendix 8

    30. Appendix 9

    31. ANNEX IV

    32. Appendix 1

    33. Appendix 2

    34. ANNEX V

    35. ANNEX VI

    36. Appendix 1

    37. ANNEX VII

    38. ANNEX VIII

    39. ANNEX IX

    40. ANNEX X

    41. ANNEX XI

    42. Appendix 1

    43. Appendix 2

    44. ANNEX XII

    45. ANNEX XIII

    46. Appendix 1

    47. Appendix 2

    48. Appendix 3

    49. ANNEX XIV

    50. Appendix 1

    51. ANNEX XV

    52. ANNEX XVI

    53. ANNEX XVII

    54. ANNEX XVIII

    55. ANNEX XIX

    56. ANNEX XX

    57. ANNEX XXI

    58. Sub-Annex 1

    59. Sub-Annex 2

    60. Sub-Annex 3

    61. Sub-Annex 4

    62. Sub-Annex 5

    63. Sub-Annex 6

    64. Sub-Annex 6 - Appendix 1

    65. Sub-Annex 6 - Appendix 2

    66. Sub-Annex 6 - Appendix 3

    67. Sub-Annex 6a

    68. Sub-Annex 6b

    69. Sub-Annex 7

    70. Sub-Annex 8

    71. Sub-Annex 8 Appendix 1

    72. Sub-Annex 8 Appendix 2

    73. Sub-Annex 8 Appendix 3

    74. Sub-Annex 8 Appendix 4

    75. Sub-Annex 8 - Appendix 5

    76. Sub-Annex 8 Appendix 6

    77. Sub-Annex - 8Appendix 7

    78. Sub-Annex 9

    79. ANNEX XXII

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources