Commission Implementing Regulation (EU) 2016/799 of 18 March 2016 implementing Regulation (EU) No 165/2014 of the European Parliament and of the Council laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance) (c. 799)

ANNEX I C U.K. Requirements for construction, testing, installation, and inspection

4. CONSTRUCTION AND FUNCTIONAL REQUIREMENTS FOR TACHOGRAPH CARDS U.K.

4.5 Data storage U.K.

4.5.3 Driver card U.K.

4.5.3.2 Tachograph generation 2 application (not accessible to first generation vehicle unit) U.K.

4.5.3.2.7 Events data U.K.

For the purpose of this subparagraph, time shall be stored with a resolution of 1 second.

(285) The driver card shall be able to store data related to the following events detected by the recording equipment while the card was inserted: U.K.

• Time overlap (where this card is the cause of the event),

• Card insertion while driving (where this card is the subject of the event),

• Last card session not correctly closed (where this card is the subject of the event),

• Power supply interruption,

• Communication error with the remote communication facility,

• Absence of position information from GNSS receiver event,

• Communication error with the external GNSS facility

• Motion data error,

• Vehicle motion conflict,

• Security breach attempts,

• Time conflict.

(286) The driver card shall be able to store the following data for these events: U.K.

• Event code,

• Date and time of beginning of the event (or of card insertion if the event was on-going at that time),

• Date and time of end of the event (or of card withdrawal if the event was on-going at that time),

• VRN and registering Member State of vehicle in which the event happened.

Note: For the ‘Time overlap’ event: U.K.

• Date and time of beginning of the event shall correspond to the date and time of the card withdrawal from the previous vehicle,

• Date and time of end of the event shall correspond to the date and time of card insertion in current vehicle,

• Vehicle data shall correspond to the current vehicle raising the event.

Note: For the ‘Last card session not correctly closed’ event: U.K.

• date and time of beginning of event shall correspond to the card insertion date and time of the session not correctly closed,

• date and time of end of event shall correspond to the card insertion date and time of the session during which the event was detected (current session),

• Vehicle data shall correspond to the vehicle in which the session was not correctly closed.

(287) The driver card shall be able to store data for the six most recent events of each type (i.e. 66 events). U.K.