Commission Implementing Regulation (EU) 2016/799 of 18 March 2016 implementing Regulation (EU) No 165/2014 of the European Parliament and of the Council laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance) (c. 799)

ANNEX I C U.K. Requirements for construction, testing, installation, and inspection

Appendix 7

DATA DOWNLOADING PROTOCOLS U.K.

2. V.U. DATA DOWNLOADING U.K.

2.2. Data download protocol U.K.

2.2.6 Response Message content U.K.

2.2.6.3 Positive Response Transfer Data Events and Faults U.K.

DDP_031 [F1 The data field of the ‘Positive Response Transfer Data Events and Faults’ message shall provide the following data in the following order under the SID 76 Hex, the TREP 03 or 23 Hex and appropriate sub message splitting and counting:] U.K.

[F1 Data structure generation 1 (TREP 03 Hex)]
Data element		Comment
		All faults stored or on-going in the VU. If the section is empty, only noOfVuFaults = 0 is sent.
		All events (except over speeding) stored or on-going in the VU. If the section is empty, only noOfVuEvents = 0 is sent.
		Data related to last over speeding control (default value if no data).
		All over speeding events stored in the VU. If the section is empty, only noOfVuOverSpeedingEvents = 0 is sent.
		All time adjustment events stored in the VU (outside the frame of a full calibration). If the section is empty, only noOfVuTimeAdjRecords = 0 is sent.
		RSA signature of all data starting from noOfVuFaults down to last byte of last time adjustment record

[F1 Data structure generation 2 (TREP 23 Hex)]
Data element		Comment
		All faults stored or on-going in the VU. If the section is empty, an array header with noOfRecords = 0 is sent.
		All events (except over speeding) stored or on-going in the VU. If the section is empty, an array header with noOfRecords = 0 is sent.
		Data related to last over speeding control (default value if no data).
		All over speeding events stored in the VU. If the section is empty, an array header with noOfRecords = 0 is sent.
		All time adjustment events stored in the VU (outside the frame of a full calibration). If the section is empty, an array header with noOfRecords = 0 is sent.
[ F2 ]
		ECC signature of all preceding data.

Textual Amendments

F1 Substituted by Commission Implementing Regulation (EU) 2018/502 of 28 February 2018 amending Implementing Regulation (EU) 2016/799 laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance).