Commission Implementing Regulation (EU) 2016/799 of 18 March 2016 implementing Regulation (EU) No 165/2014 of the European Parliament and of the Council laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance)

4.3.2 Workshop card application generation 2 U.K.

TCS_160After its personalisation, the workshop card application generation 2 shall have the following permanent file structure and file access rules.U.K.

Note: The short EF identifier SFID is given as decimal number, e.g. the value 30 corresponds to 11110 in binary.U.K.

The following abbreviations for the security conditions are used in this table:

SC1

ALW OR SM-MAC-G2

SC5

For the Read Binary command with even INS byte: SM-C-MAC-G2 AND SM-R-ENC-MAC-G2

For the Read Binary command with odd INS byte (if supported): NEV

TCS_161All EFs structures shall be transparent.U.K.

TCS_162The workshop card application generation 2 shall have the following data structure:U.K.

TCS_163The following values, used to provide sizes in the table above, are the minimum and maximum record number values the workshop card data structure must use for a generation 2 application:U.K.

Commission Implementing Regulation (EU) 2016/799Show full title

4.3.2 Workshop card application generation 2 U.K.

TCS_160After its personalisation, the workshop card application generation 2 shall have the following permanent file structure and file access rules.U.K.

TCS_161All EFs structures shall be transparent.U.K.

TCS_162The workshop card application generation 2 shall have the following data structure:U.K.

TCS_163The following values, used to provide sizes in the table above, are the minimum and maximum record number values the workshop card data structure must use for a generation 2 application:U.K.