Commission Implementing Regulation (EU) 2016/799 of 18 March 2016 implementing Regulation (EU) No 165/2014 of the European Parliament and of the Council laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (Text with EEA relevance) (c. 799)

Please note that the date you requested in the address for this web page is not an actual date upon which a change occurred to this item of legislation. You are being shown the legislation from , which is the first date before then upon which a change was made.

ANNEX I C U.K. Requirements for construction, testing, installation, and inspection

Appendix 2

TACHOGRAPH CARDS SPECIFICATION U.K.

4. TACHOGRAPH CARDS STRUCTURE U.K.

4.2. Driver card applications U.K.

4.2.2 Driver card application generation 2 U.K.

TCS_152 After its personalisation, the driver card application generation 2 shall have the following permanent file structure and file access rules. U.K.

Note: The short EF identifier SFID is given as decimal number, e.g. the value 30 corresponds to 11110 in binary. U.K.

The following abbreviation for the security condition is used in this table:

SC1

ALW OR SM-MAC-G2

TCS_153 All EF structures shall be transparent. U.K.

TCS_154 The driver card application generation 2 shall have the following data structure: U.K.

TCS_155 The following values, used to provide sizes in the table above, are the minimum and maximum record number values the driver card data structure must use for a generation 2 application: U.K.