2.1. ActivityChangeInfo U.K.
This data type enables to code, within a two bytes word, a slot status at 00:00 and/or a driver status at 00:00 and/or changes of activity and/or changes of driving status and/or changes of card status for a driver or a co-driver. This data type is related to Annex 1C requirements 105, 266, 291, 320, 321, 343, and 344.
Value assignment — Octet Aligned: ‘scpaattttttttttt’B (16 bits)U.K.
For Data Memory recordings (or slot status):
Slot:
‘0’B: DRIVER,
‘1’B: CO-DRIVER,
Driving status:
‘0’B: SINGLE,
‘1’B: CREW,
Driver (or workshop) card status in the relevant slot:
‘0’B: INSERTED, a card is inserted,
‘1’B: NOT INSERTED, no card is inserted (or a card is withdrawn),
Activity:
‘00’B: BREAK/REST,
‘01’B: AVAILABILITY,
‘10’B: WORK,
‘11’B: DRIVING,
Time of the change: Number of minutes since 00h00 on the given day.
For Driver (or Workshop) card recordings (and driver status):
Slot (not relevant when ‘p’=1 except note below):
‘0’B: DRIVER,
‘1’B: CO-DRIVER,
Driving status (case ‘p’=0) or
Following activity status (case ‘p’=1):
‘0’B: SINGLE,
‘0’B: UNKNOWN
‘1’B: CREW,
‘1’B: KNOWN (=manually entered)
Card status:
‘0’B: INSERTED, the card is inserted in a recording equipment,
‘1’B: NOT INSERTED, the card is not inserted (or the card is withdrawn),
Activity (not relevant when ‘p’=1 and ‘c’=0 except note below):
‘00’B: BREAK/REST,
‘01’B: AVAILABILITY,
‘10’B: WORK,
‘11’B: DRIVING,
Time of the change: Number of minutes since 00h00 on the given day.
Note for the case ‘card withdrawal’: U.K.
When the card is withdrawn:
‘s’ is relevant and indicates the slot from which the card is withdrawn,
‘c’ must be set to 0,
‘p’ must be set to 1,
‘aa’ must code the current activity selected at that time,
As a result of a manual entry, the bits ‘c’ and ‘aa’ of the word (stored in a card) may be overwritten later to reflect the entry.