ANNEX I CRequirements for construction, testing, installation, and inspection

Appendix 1

DATA DICTIONARY

2.DATA TYPE DEFINITIONS

2.1.ActivityChangeInfo

This data type enables to code, within a two bytes word, a slot status at 00:00 and/or a driver status at 00:00 and/or changes of activity and/or changes of driving status and/or changes of card status for a driver or a co-driver. This data type is related to Annex 1C requirements 105, 266, 291, 320, 321, 343, and 344.

Image_r00002

Value assignment — Octet Aligned: ‘scpaattttttttttt’B (16 bits)

For Data Memory recordings (or slot status):

‘s’B

Slot:

  • ‘0’B: DRIVER,

  • ‘1’B: CO-DRIVER,

‘c’B

Driving status:

  • ‘0’B: SINGLE,

  • ‘1’B: CREW,

‘p’B

Driver (or workshop) card status in the relevant slot:

  • ‘0’B: INSERTED, a card is inserted,

  • ‘1’B: NOT INSERTED, no card is inserted (or a card is withdrawn),

‘aa’B

Activity:

  • ‘00’B: BREAK/REST,

  • ‘01’B: AVAILABILITY,

  • ‘10’B: WORK,

  • ‘11’B: DRIVING,

‘ttttttttttt’B

Time of the change: Number of minutes since 00h00 on the given day.

For Driver (or Workshop) card recordings (and driver status):

‘s’B

Slot (not relevant when ‘p’=1 except note below):

  • ‘0’B: DRIVER,

  • ‘1’B: CO-DRIVER,

‘c’B

Driving status (case ‘p’=0) or

Following activity status (case ‘p’=1):

  • ‘0’B: SINGLE,

  • ‘0’B: UNKNOWN

  • ‘1’B: CREW,

  • ‘1’B: KNOWN (=manually entered)

‘p’B

Card status:

  • ‘0’B: INSERTED, the card is inserted in a recording equipment,

  • ‘1’B: NOT INSERTED, the card is not inserted (or the card is withdrawn),

‘aa’B

Activity (not relevant when ‘p’=1 and ‘c’=0 except note below):

  • ‘00’B: BREAK/REST,

  • ‘01’B: AVAILABILITY,

  • ‘10’B: WORK,

  • ‘11’B: DRIVING,

‘ttttttttttt’B

Time of the change: Number of minutes since 00h00 on the given day.

Note for the case ‘card withdrawal’:

When the card is withdrawn:

  • ‘s’ is relevant and indicates the slot from which the card is withdrawn,

  • ‘c’ must be set to 0,

  • ‘p’ must be set to 1,

  • ‘aa’ must code the current activity selected at that time,

As a result of a manual entry, the bits ‘c’ and ‘aa’ of the word (stored in a card) may be overwritten later to reflect the entry.