Commission Implementing Regulation (EU) 2016/1825

of 6 September 2016

amending Implementing Regulation (EU) No 901/2014 with regard to the administrative requirements for the approval and market surveillance of two- or three-wheel vehicles and quadricycles

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles1, and in particular Articles 27(4), 29(4), 30(2) and (3), 32(1), 38(2), 39(3), 40(4) and Article 72 thereof,

Whereas:

(1)
To allow the type-approval of fuel tanks as a separate technical unit, a specific information document containing the related information should be inserted as a new Appendix to Annex I to Commission Implementing Regulation (EU) No 901/20142.
(2)

In order to reduce the administrative burden on manufacturers, in particular with regard to vehicles of categories L6e and L7e, additional system type-approvals should be allowed.

(3)

To ensure that in the case of vehicles equipped with Continuous Variable Transmission all relevant information is provided, the table specifying information on gear ratios to be entered into the information document should be amended.

(4)

In order to establish a clear link between the two configurations of vehicles capable of converting their performance level from subcategory (L3e/L4e)-A2 to (L3e/L4e)-A3 and vice versa, and to facilitate vehicle owners' access to that information, an entry for the EU type-approval number of the original configuration should be added to the template set out in Appendix 24 to Annex I to Implementing Regulation (EU) No 901/2014 and to the template for the certificate of conformity set out in Annex IV to that Implementing Regulation.

(5)

To provide further information in the case of new technologies and new concepts, additional entries should be inserted in the templates for type-approval certificates for systems, components or separate technical units.

(6)

For the purposes of clarity and consistency some explanatory notes should be amended or deleted.

(7)

Implementing Regulation (EU) No 901/2014 should therefore be amended accordingly.

(8)

In order to allow additional time for manufacturers and national authorities to achieve a timely application of the amendments provided for in this Regulation, this Regulation should enter into force as a matter of urgency, especially taking into account that Regulation (EU) No 168/2013 became applicable on 1 January 2016 and that related administrative requirements will become compulsory with regard to all new vehicles registered or placed on the market as from 1 January 2018.

(9)

The applicability of the amendments to the templates for the certificates of conformity should be deferred until 1 September 2017 in order to provide manufacturers and national authorities with additional lead-time for the adaptation of their administrative arrangements for the registration of vehicles, and in particular their information technology systems, to those amendments.

(10)

The measures provided for in this Regulation are in accordance with the opinion of the committee referred to in Article 73(1) of Regulation (EU) No 168/2013,

HAS ADOPTED THIS REGULATION:

Article 1

Annexes I and IV to VIII to Implementing Regulation (EU) No 901/2014 are amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the first day following that of its publication in the Official Journal of the European Union.

Point 2 of the Annex shall apply from 1 September 2017.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 6 September 2016.

For the Commission

The President

Jean-Claude Juncker

ANNEX

Implementing Regulation (EU) No 901/2014 is amended as follows:

  1. (1)

    Annex I is amended as follows:

    1. (a)

      in the list of Appendices, each of the following rows is inserted following their numerical order:

      ‘5a

      Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a maximum torque and a maximum net power of a propulsion unit system

      8a

      Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of audible warning devices system

      9a

      Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of glazing, windscreen wipers and defrosting and demisting devices system

      9b

      Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an identification of controls, tell-tales and indicators system

      11a

      Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a safety belt anchorages system

      11b

      Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a steer-ability, cornering properties and turn ability system

      13a

      Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a vehicle occupant protection, including interior fittings, head restraint and vehicle doors system

      20a

      Model information document relating to EU type-approval of a fuel tank as a STU’

    2. (b)

      in Part B, in point 2.2., in Table 1, in LIST I, the following row is inserted following its numerical order:

      ‘5a

      System: maximum torque and a maximum net power of a propulsion unit

      X

      Appendix 2’

    3. (c)

      in Part B, in point 2.2., in Table 1, in LIST II, each of the following rows is inserted following their numerical order:

      ‘8a

      System: installation of audible warning devices

      II

      9a

      System: installation of glazing, windscreen wipers and defrosting and demisting devices

      VII

      9b

      System: identification of controls, tell-tales and indicators

      VIII

      11a

      System: safety belt anchorages

      XII

      11b

      System: steer-ability, cornering properties and turn ability

      XIV

      13a

      System: vehicle occupant protection, including interior fittings, head restraint and vehicle doors

      XVII’

    4. (d)

      in Part B, in point 2.2., in Table 1, in LIST III, each of the following rows is inserted following their numerical order:

      ‘20a

      STU: fuel tank

      IX’

    5. (e)

      in Part B, in point 2.8., the table relating to information document data entries is amended as follows:

      1. (i)

        the following information document data entry 3.3.3.4. is inserted:

        ‘3.3.3.4.

        L1e — L7e

        15/30(4) minutes power(27): …kW’

      2. (ii)

        the information document data entry 3.5.4. is replaced by the following:

        ‘3.5.4.Gear ratios

        L1e — L7e

        Overview gear ratios

        Gear(24)

        Internal transmission ratios (ratios of engine to transmission output shaft revolutions)

        Final drive ratio(s) (ratio of transmission output shaft to driven wheel revolutions)

        Total gear ratios

        Ratio (engine speed/vehicle speed) for manual transmission only

        1

        2

        3

        …

        Reverse’

      3. (iii)

        the information document data entry 4.0.1. is replaced by the following:

        ‘4.0.1.

        L1e — L7e

        Environmental step: Euro …(3/4/5) (4)’

      4. (iv)

        the following information document data entries 4.0.2. to 4.0.5. are inserted:

        ‘4.0.2.

        L1e — L7e

        Fuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km

        4.0.3.

        L1e — L7e

        CO2 emissions(25): …g/km

        4.0.4.

        L1e — L7e

        Energy consumption(25): …Wh/km

        4.0.5.

        L1e — L7e

        Electric range(25): …km’

    6. (f)

      Appendix 3 is amended as follows:

      1. (i)

        the information document data entry 4.0.1. is replaced by the following:

        ‘4.0.1.

        L1e — L7e

        Environmental step: Euro …(3/4/5) (4)’

      2. (ii)

        the following information document data entries 4.0.2. to 4.0.5. are inserted:

        ‘4.0.2.

        L1e — L7e

        Fuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km

        4.0.3.

        L1e — L7e

        CO2 emissions(25): …g/km

        4.0.4.

        L1e — L7e

        Energy consumption(25): …Wh/km

        4.0.5.

        L1e — L7e

        Electric range(25): …km’

    7. (g)

      Appendix 4 is amended as follows:

      1. (i)

        the information document data entries 4.0.2., 4.0.2.1. and 4.0.2.2. are deleted;

      2. (ii)

        the following information document data entries 4.0.6. and 4.0.6.1. are inserted:

        ‘4.0.6.

        Sound level

        4.0.6.1.

        L3e

        Limit value for Lurban(16): …dB(A)’;

    8. (h)

      the following Appendix 5a is inserted:

      ‘Appendix 5aModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a maximum torque and a maximum net power of a propulsion unit system

      Item No.

      (Sub) categories

      Detailed information

      B.

      General information concerning systems, components or separate technical units

      0.7.

      L1e — L7e

      Make(s) (trade name(s) of manufacturer): …

      0.8.

      L1e — L7e

      Type: …

      0.8.1.

      L1e — L7e

      Commercial name(s) (if available): …

      0.8.2.

      L1e — L7e

      Type-approval number(s) (if available): …

      0.8.3.

      L1e — L7e

      Type-approval(s) issued on (date, if available): …

      0.9.

      Company name and address of manufacturer: …

      0.9.1.

      L1e — L7e

      Name(s) and address(es) of assembly plants: …

      0.9.2.

      L1e — L7e

      Name and address of manufacturer's authorised representative, if any: …

      0.10.

      Vehicle(s) for which the separate technical unit is intended for(21):

      0.10.1.

      L1e — L7e

      Type(17): …

      0.10.2.

      L1e — L7e

      Variant(17): …

      0.10.3.

      L1e — L7e

      Version(17): …

      0.10.4.

      L1e — L7e

      Commercial name(s) (if available): …

      0.10.5.

      L1e — L7e

      Category, subcategory and sub-subcategory of vehicle(2): …

      C.

      General information concerning vehicle, systems, components or separate technical units

      0.12.

      Conformity of production

      0.12.1.

      L1e — L7e

      Description of overall quality-assurance management systems.

      1.

      GENERAL CONSTRUCTION CHARACTERISTICS

      1.8.

      Propulsion unit performance

      1.8.1.

      L3e, L4e, L5e, L7e-A, L7e-B2

      Declared maximum vehicle speed: …km/h

      1.8.2.

      L1e, L2e, L6e, L7e-B1, L7e-C

      Maximum design vehicle speed(22): …km/h and gear in which it is reached: …

      1.8.3.

      L1e — L7e

      Maximum net power combustion engine: …kW at …min-1 at A/F ratio: …

      1.8.4.

      L1e — L7e

      Maximum net torque combustion engine: …Nm at …min-1 at A/F ratio: …

      1.8.5.

      L1e — L7e

      Maximum continuous-rated power electric motor (15/30(4) minutes power(27)): …kW at …min-1

      1.8.6.

      L1e — L7e

      Maximum continuous-rated torque electric motor: …Nm at …min-1

      1.8.7.

      L1e — L7e

      Maximum continuous total power for propulsion(s): …kW at …min-1 at A/F ratio: …

      1.8.8.

      L1e — L7e

      Maximum continuous total torque for propulsion(s): …Nm at …min-1 at A/F ratio: …

      1.8.9.

      L1e — L7e

      Maximum peak power for propulsion(s): …kW at …min-1 at A/F ratio: …

      3.

      GENERAL POWERTRAIN CHARACTERISTICS

      3.2.

      Combustion engine

      3.2.1.

      Specific engine information

      3.2.1.1.

      L1e — L7e

      Number of combustion engines: …

      3.2.1.2.

      L1e — L7e

      Working principle: internal combustion engine (ICE)/positive ignition/compression ignition/external combustion engine (ECE)/turbine/compressed air(4): …

      3.2.1.3.

      L1e — L7e

      Cycle: four-stroke/two-stroke/rotary/other(4):

      3.2.1.4.

      L1e — L7e

      Cylinders

      3.2.1.4.1.

      L1e — L7e

      Number: …

      3.2.1.4.2.

      L1e — L7e

      Arrangement(26): …

      3.2.1.4.3.

      L1e — L7e

      Bore(12): …mm

      3.2.1.4.4.

      L1e — L7e

      Stroke(12): …mm

      3.2.1.4.5.

      L1e — L7e

      Number and configuration of stators in the case of rotary-piston engine: …

      3.2.1.4.6.

      L1e — L7e

      Volume of combustion chambers in the case of rotary-piston engine: …cm3

      3.2.1.4.7.

      L1e — L7e

      Firing order: …

      3.2.1.5.

      L1e — L7e

      Engine capacity(6): …cm3

      3.2.1.6.

      L1e — L7e

      Volumetric compression ratio(7): …

      3.3.

      Pure electric and hybrid electric propulsion and control

      3.3.3.4.

      L1e — L7e

      15/30(4) minutes power(27): …kW’

    9. (i)

      Appendix 6 is amended as follows:

      1. (i)

        the information document data entry 4.0.1. is replaced by the following:

        ‘4.0.1.

        L1e — L7e

        Environmental step: Euro …(3/4/5) (4)’

      2. (ii)

        the following information document data entries 4.0.2. to 4.0.5. are inserted:

        ‘4.0.2.

        L1e — L7e

        Fuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km

        4.0.3.

        L1e — L7e

        CO2 emissions(25): …g/km

        4.0.4.

        L1e — L7e

        Energy consumption(25): …Wh/km

        4.0.5.

        L1e — L7e

        Electric range(25): …km’

    10. (j)

      Appendix 7 is amended as follows:

      1. (i)

        the information document data entries 4.0.1. and 4.0.2. are replaced by the following:

        ‘4.0.1.

        L1e — L7e

        Environmental step: Euro …(3/4/5) (4)

        4.0.2.

        L1e — L7e

        Fuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km’

      2. (ii)

        the information document data entries 4.0.2.1. and 4.0.2.2. are deleted;

      3. (iii)

        the following information document data entries 4.0.3. to 4.0.6.1. are inserted:

        ‘4.0.3.

        L1e — L7e

        CO2 emissions(25): …g/km

        4.0.4.

        L1e — L7e

        Energy consumption(25): …Wh/km

        4.0.5.

        L1e — L7e

        Electric range(25): …km

        4.0.6.

        Sound level

        4.0.6.1.

        L3e

        Limit value for Lurban(16): …dB(A)’

    11. (k)

      Appendix 8 is amended as follows:

      1. (i)

        the information document data entries 4.0.1. and 4.0.2. are replaced by the following:

        ‘4.0.1.

        L1e — L7e

        Environmental step: Euro …(3/4/5) (4)

        4.0.2.

        L1e — L7e

        Fuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km’

      2. (ii)

        the information document data entries 4.0.2.1. and 4.0.2.2. are deleted;

      3. (iii)

        the following information document data entries 4.0.3. to 4.0.6.1. are inserted:

        ‘4.0.3.

        L1e — L7e

        CO2 emissions(25): …g/km

        4.0.4.

        L1e — L7e

        Energy consumption(25): …Wh/km

        4.0.5.

        L1e — L7e

        Electric range(25): …km

        4.0.6.

        Sound level

        4.0.6.1.

        L3e

        Limit value for Lurban(16): …dB(A)’;

    12. (l)

      the following Appendix 8a is inserted:

      ‘Appendix 8aModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of audible warning devices system

      Item No.

      (Sub) categories

      Detailed information

      B.

      General information concerning systems, components or separate technical units

      0.7.

      L1e — L7e

      Make(s) (trade name(s) of manufacturer): …

      0.8.

      L1e — L7e

      Type: …

      0.8.1.

      L1e — L7e

      Commercial name(s) (if available): …

      0.8.2.

      L1e — L7e

      Type-approval number(s) (if available): …

      0.8.3.

      L1e — L7e

      Type-approval(s) issued on (date, if available): …

      0.9.

      Company name and address of manufacturer: …

      0.9.1.

      L1e — L7e

      Name(s) and address(es) of assembly plants: …

      0.9.2.

      L1e — L7e

      Name and address of manufacturer's authorised representative, if any: …

      0.10.

      Vehicle(s) for which the separate technical unit is intended for(21):

      0.10.1.

      L1e — L7e

      Type(17): …

      0.10.2.

      L1e — L7e

      Variant(17): …

      0.10.3.

      L1e — L7e

      Version(17): …

      0.10.4.

      L1e — L7e

      Commercial name(s) (if available): …

      0.10.5.

      L1e — L7e

      Category, subcategory and sub-subcategory of vehicle(2): …

      C.

      General information concerning vehicle, systems, components or separate technical units

      0.12.

      Conformity of production

      0.12.1.

      L1e — L7e

      Description of overall quality-assurance management systems.

      6.

      INFORMATION ON FUNCTIONAL SAFETY

      6.1.

      Audible warning devices

      6.1.1.

      L1e — L7e

      Summary description of device(s) used and their purpose: …

      6.1.2.

      L1e — L7e

      Drawing(s) showing the location of the audible warning device(s) in relation to the structure of the vehicle: …

      6.1.3.

      L1e — L7e

      Details of the method of attachment, including the part of the vehicle structure to which the audible warning device(s) is (are) attached: …

      6.1.4.

      L1e — L7e

      Electrical/pneumatic circuit diagram: …

      6.1.4.1.

      L1e — L7e

      Voltage: AC/DC(4)

      6.1.4.2.

      L1e — L7e

      Rated voltage or pressure: …

      6.1.5.

      L1e — L7e

      Drawing of the mounting device: …’;

    13. (m)

      the following Appendix 9a is inserted:

      ‘Appendix 9aModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of glazing, windscreen wipers and defrosting and demisting devices system

      Item No.

      (Sub) categories

      Detailed information

      B.

      General information concerning systems, components or separate technical units

      0.7.

      L1e — L7e

      Make(s) (trade name(s) of manufacturer): …

      0.8.

      L1e — L7e

      Type: …

      0.8.1.

      L1e — L7e

      Commercial name(s) (if available): …

      0.8.2.

      L1e — L7e

      Type-approval number(s) (if available): …

      0.8.3.

      L1e — L7e

      Type-approval(s) issued on (date, if available): …

      0.9.

      Company name and address of manufacturer: …

      0.9.1.

      L1e — L7e

      Name(s) and address(es) of assembly plants: …

      0.9.2.

      L1e — L7e

      Name and address of manufacturer's authorised representative, if any: …

      0.10.

      Vehicle(s) for which the separate technical unit is intended for(21):

      0.10.1.

      L1e — L7e

      Type(17): …

      0.10.2.

      L1e — L7e

      Variant(17): …

      0.10.3.

      L1e — L7e

      Version(17): …

      0.10.4.

      L1e — L7e

      Commercial name(s) (if available): …

      0.10.5.

      L1e — L7e

      Category, subcategory and sub-subcategory of vehicle(2): …

      C.

      General information concerning vehicle, systems, components or separate technical units

      0.12.

      Conformity of production

      0.12.1.

      L1e — L7e

      Description of overall quality-assurance management systems.

      1.

      GENERAL CONSTRUCTION CHARACTERISTICS

      1.7.

      L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C

      Hand of drive: left/right/centre(4): …

      1.7.1.

      L1e — L7e

      Vehicle is equipped to be driven in right/left-hand traffic and in countries that use metric/metric and imperial units(4): …

      3.

      GENERAL POWERTRAIN CHARACTERISTICS

      3.1

      Manufacturer of the propulsion unit

      3.1.1.

      Combustion engine

      3.1.1.1.

      L1e — L7e

      Manufacturer: …

      3.1.1.2.

      L1e — L7e

      Engine code (as marked on the engine or other means of identification): …

      3.1.2.

      Electric motor

      3.1.2.1.

      L1e — L7e

      Manufacturer: …

      3.1.2.2.

      L1e — L7e

      Electric motor code (as marked on the engine or other means of identification): …

      3.1.3.

      Hybrid application

      3.1.3.1.

      L1e — L7e

      Manufacturer: …

      3.1.3.2.

      L1e — L7e

      Application code (as marked on the engine or other means of identification): …

      3.2.

      Combustion engine

      3.2.1.

      Specific engine information

      3.2.1.2.

      L1e — L7e

      Working principle: internal combustion engine (ICE)/positive ignition/compression ignition/external combustion engine (ECE)/turbine/compressed air(4): …

      3.2.1.3.

      L1e — L7e

      Cycle: four-stroke/two-stroke/rotary/other(4): …

      3.2.1.4.

      L1e — L7e

      Cylinders

      3.2.1.4.1.

      L1e — L7e

      Number: …

      3.2.1.4.2.

      L1e — L7e

      Arrangement(26): …

      3.2.1.5.

      L1e — L7e

      Engine capacity(6): …cm3

      3.2.1.9.

      L1e — L7e

      Normal warm engine idling speed: …min-1

      3.2.3.

      Fuel

      3.2.3.1.

      L1e — L7e

      Fuel type: (9)

      3.2.3.2.

      L1e — L7e

      Vehicle fuel configuration: mono-fuel/bi- fuel/flex fuel(4)

      3.2.10.

      Powertrain cooling system and control

      3.2.10.2.

      L1e — L7e

      Cooling system: liquid: yes/no(4)

      3.2.10.2.2.

      L1e — L7e

      Nominal setting of the engine temperature control mechanism: …

      3.2.10.2.3.

      L1e — L7e

      Nature of liquid: …

      3.2.10.2.4.

      L1e — L7e

      Circulating pump(s): yes/no(4)

      3.2.10.2.4.1.

      L1e — L7e

      Characteristics: …

      3.2.10.2.5.

      L1e — L7e

      Drive ratio(s): …

      3.2.10.2.6.

      L1e — L7e

      Description of the fan and its drive mechanism: …

      3.2.10.3.

      L1e — L7e

      Air cooling: yes/no(4)

      3.2.10.3.3.

      L1e — L7e)

      Fan: yes/no(4)

      3.2.10.3.3.1.

      L1e — L7e

      Characteristics: …

      3.2.13.

      Other electrical systems and control than those intended for the electrical propulsion

      3.2.13.1.

      L1e — L7e

      Rated voltage: …V, positive/negative ground(4)

      3.2.13.2.

      L1e — L7e

      Generator: yes/no(4):

      3.2.13.2.1.

      L1e — L7e

      Nominal output: …VA

      3.3.

      Pure electric and hybrid electric propulsion and control

      3.3.3.

      Electric propulsion motor

      3.3.3.2.

      L1e — L7e

      Type (winding, excitation): …

      3.3.3.3.

      L1e — L7e

      Operating voltage: …V

      3.3.4.

      Propulsion batteries

      3.3.4.1.

      L1e — L7e

      Primary propulsion battery

      3.3.4.1.1.

      L1e — L7e

      Number of cells: …

      3.3.4.1.2.

      L1e — L7e

      Mass: …kg

      3.3.4.1.3.

      L1e — L7e

      Capacity: …Ah (Amp-hours) / …V

      3.3.4.1.5.

      L1e — L7e

      Position in the vehicle: …

      3.3.4.2.

      L1e — L7e

      Secondary propulsion battery

      3.3.4.2.1.

      L1e — L7e

      Number of cells: …

      3.3.4.2.2.

      L1e — L7e

      Mass: …kg

      3.3.4.2.3.

      L1e — L7e

      Capacity: …Ah (Amp-hours) / …V

      3.3.4.2.5.

      L1e — L7e

      Position in the vehicle: …

      3.3.5.

      Hybrid electric vehicle

      3.3.5.1.

      L1e — L7e

      Engine or motor combination (number of electric motor(s) and/or combustion engine(s)/other)(4): …

      3.3.5.2.

      L1e — L7e

      Category of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging:

      3.3.5.3.

      L1e — L7e

      Operating mode switch: with/without(4)

      3.3.5.4.

      L1e — L7e

      Selectable modes: yes/no(4)

      3.3.5.5.

      L1e — L7e

      Pure fuel consuming: yes/no(4)

      3.3.5.6.

      L1e — L7e

      Vehicle propelled with fuel cell: yes/no(4)

      3.3.5.7.

      L1e — L7e

      Hybrid operation modes: yes/no(4) (if yes, short description): …

      3.3.6.

      Energy storage device

      3.3.6.1.

      L1e — L7e

      Description: (battery, capacitor, flywheel/generator)(4)

      3.3.6.2.

      L1e — L7e

      Identification number: …

      * 3.3.6.3.

      L1e — L7e

      Kind of electrochemical couple: …

      3.3.6.4.

      L1e — L7e

      Energy (for battery: voltage and capacity Ah in 2h, for capacitor: J,…, for flywheel/generator: J,…,): …

      3.3.6.5.

      L1e — L7e

      Charger: on-board/external/without(4)

      3.4.

      Other engines, electric motors or combinations (specific information concerning the parts of these motors)

      3.4.1.

      Cooling system (temperatures permitted by the manufacturer)

      3.4.1.1.

      L1e — L7e

      Liquid cooling: …

      3.4.1.1.1.

      L1e — L7e

      Maximum temperature at outlet: …K

      3.4.1.2.

      L1e — L7e

      Air cooling: …

      3.4.1.2.1.

      L1e — L7e

      Reference point: …

      3.4.1.2.2.

      L1e — L7e

      Maximum temperature at reference point: …K

      6.

      INFORMATION ON FUNCTIONAL SAFETY

      6.5.

      Glazing, windscreen wipers and washers, and defrosting and demisting systems

      6.5.1.

      Windscreen

      6.5.1.1.

      L2e, L5e, L6e, L7e

      Materials used: …

      6.5.1.2.

      L2e, L5e, L6e, L7e

      Method of mounting: …

      6.5.1.3.

      L2e, L5e, L6e, L7e

      Angle of inclination: …

      6.5.1.4.

      L2e, L5e, L6e, L7e

      Windscreen accessories and the position in which they are fitted, together with a brief description of any electrical/electronic components: …

      6.5.1.5.

      L2e, L5e, L6e, L7e

      Drawing of the windscreen with dimensions: …

      6.5.2.

      Other windows

      6.5.2.1.

      L2e, L5e, L6e, L7e

      Materials used: …

      6.5.2.2

      L2e, L5e, L6e, L7e

      A brief description of the electrical/electronic components (if any) of the window lifting mechanism: …

      6.5.3.

      Opening roof glazing

      6.5.3.1.

      L2e, L5e, L6e, L7e

      Materials used: …

      6.5.4.

      Other glass panes

      6.5.4.1.

      L2e, L5e, L6e, L7e

      Materials used: …

      6.6.

      Windscreen wiper(s)

      6.6.1.

      L2e, L5e, L6e, L7e

      Detailed technical description (including photographs or drawings): …

      6.7.

      Windscreen washer

      6.7.1.

      L2e, L5e, L6e, L7e

      Detailed technical description (including photographs or drawings): …

      6.7.2.

      L2e, L5e, L6e, L7e

      Capacity of the reservoir: …l

      6.8.

      Defrosting and demisting

      6.8.1.

      L2e, L5e, L6e, L7e

      Detailed technical description (including photographs or drawings): …

      6.16.

      Seating positions (saddles and seats)

      6.16.1.

      L1e — L7e

      Number of seating positions: …

      6.16.1.1.

      L2e, L5e, L6e, L7e

      Location and arrangement(8): …

      6.16.4.

      L2e, L4e, L5e-B, L6e-B, L7e

      Coordinates or drawing of the R-point(s) of all seating positions: …

      6.16.4.1.

      L2e, L4e, L5e-B, L6e-B, L7e

      Driver's seat: …

      6.16.5.

      L1e — L7e

      Design torso angle: …

      6.16.5.1.

      L1e — L7e

      Driver's seat: …

      6.20.

      Vehicle occupant protection, including interior fittings and vehicle doors

      6.20.1.

      Bodywork

      6.20.1.1.

      L2e, L5e-B, L6e-B, L7e

      Materials used and methods of construction: …

      6.20.2.

      Occupant doors, latches and hinges

      6.20.2.1.

      L2e, L5e, L6e, L7e

      Number of doors, and its configuration, dimensions and maximum angle of opening(5): …

      6.20.3.

      Interior protection for occupants)

      6.20.3.1.

      L2e, L5e, L6e, L7e

      Photographs, drawings and/or an exploded view of the interior fittings, showing the parts in the passenger compartment and the materials used (with the exception of interior rear view mirrors, arrangement of controls, seats and the rear part of seats), roof and opening roof, backrest: …’;

    14. (n)

      the following Appendix 9b is inserted:

      ‘Appendix 9bModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an identification of controls, te ll-tales and indicators system

      Item No.

      (Sub) categories

      Detailed information

      B.

      General information concerning systems, components or separate technical units

      0.7.

      L1e — L7e

      Make(s) (trade name(s) of manufacturer): …

      0.8.

      L1e — L7e

      Type: …

      0.8.1.

      L1e — L7e

      Commercial name(s) (if available): …

      0.8.2.

      L1e — L7e

      Type-approval number(s) (if available): …

      0.8.3.

      L1e — L7e

      Type-approval(s) issued on (date, if available): …

      0.9.

      Company name and address of manufacturer: …

      0.9.1.

      L1e — L7e

      Name(s) and address(es) of assembly plants: …

      0.9.2.

      L1e — L7e

      Name and address of manufacturer's authorised representative, if any: …

      0.10.

      Vehicle(s) for which the separate technical unit is intended for(21):

      0.10.1.

      L1e — L7e

      Type(17): …

      0.10.2.

      L1e — L7e

      Variant(17): …

      0.10.3.

      L1e — L7e

      Version(17): …

      0.10.4.

      L1e — L7e

      Commercial name(s) (if available): …

      0.10.5.

      L1e — L7e

      Category, subcategory and sub-subcategory of vehicle(2): …

      C.

      General information concerning vehicle, systems, components or separate technical units

      0.12.

      Conformity of production

      0.12.1.

      L1e — L7e

      Description of overall quality-assurance management systems.

      1.

      GENERAL CONSTRUCTION CHARACTERISTICS

      1.7.

      L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C

      Hand of drive: left/right/centre(4): …

      6.9.

      Driver-operated controls including identification of controls, tell-tales and indicators

      6.9.1.

      L1e — L7e

      Arrangement and identification of controls, tell-tales and indicators: …

      6.9.2.

      L1e — L7e

      Photographs and/or drawings of the arrangement of symbols and controls, tell-tales and indicators: …

      6.9.3.

      L1e — L7e

      Controls, tell-tales and indicators for which, when fitted, identification is mandatory, including the identification symbols to be used for that purpose:

      6.9.4.

      L1e — L7e

      Summary table: the vehicle is equipped with the following driver-operated controls, including indicators and tell-tales(4)

      Controls, tell-tales and indicators for which, when fitted, identification is mandatory, and symbols to be used for that purpose

      Symbol No

      Device

      Control / indicator available16

      Identified by symbol16

      Where17

      Tell-tale available16

      Identified by symbol16

      Where17

      1

      Master light

      2

      Dipped-beam head lamps

      3

      Main-beam head lamps

      4

      Position (side) lamps

      5

      Front fog lamps

      6

      Rear fog lamp

      7

      Headlamp levelling device

      8

      Parking lamps

      9

      Direction indicators

      10

      Hazard warning

      11

      Windscreen wiper

      12

      Windscreen washer

      13

      Windscreen wiper and washer

      14

      Headlamp cleaning device

      15

      Windscreen demisting and defrosting

      16

      Rear window demisting and defrosting

      17

      Ventilating fan

      18

      Diesel pre-heat

      19

      Choke

      20

      Brake failure

      21

      Fuel level

      22

      Battery charging condition

      23

      Engine coolant temperature

      24

      Malfunction indicator light (MI)

      16
      1. (+)
        • x

          yes

        • -

          no or not separately available

        • o

          optional.

      17
      1. (++)
        • d

          directly on control, indicator or tell-tale

        • c

          in close vicinity.

      6.9.5.

      L1e — L7e

      Controls, tell-tales and indicators for which, when fitted, identification is optional, and symbols which shall be used if they are to be identified

      Symbol No

      Device

      Control / indicator available18

      Identified by symbol18

      Where19

      Tell-tale available18

      Identified by symbol18

      Where19

      1

      Parking brake

      2

      Rear window wiper

      3

      Rear window washer

      4

      Rear window wiper and washer

      5

      Intermittent windscreen wiper

      6

      Audible warning device (horn)

      7

      Front hood (bonnet)

      8

      Rear hood (boot)

      9

      Seat belt

      10

      Engine oil pressure

      11

      Unleaded petrol

      12

      …

      13

      …

      18
      1. (+)
        • x

          yes

        • -

          no or not separately available

        • o

          optional.

      19
      1. (++)
        • d

          directly on control, indicator or tell-tale

        • c

          in close vicinity.’;

      16
      1. (+)
        • x

          yes

        • -

          no or not separately available

        • o

          optional.

      17
      1. (++)
        • d

          directly on control, indicator or tell-tale

        • c

          in close vicinity.

      18
      1. (+)
        • x

          yes

        • -

          no or not separately available

        • o

          optional.

      19
      1. (++)
        • d

          directly on control, indicator or tell-tale

        • c

          in close vicinity.’;

    15. (o)

      the following Appendix 11a is inserted:

      ‘Appendix 11aModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a safety belt anchorages system

      Item No.

      (Sub) categories

      Detailed information

      B.

      General information concerning systems, components or separate technical units

      0.7.

      L1e — L7e

      Make(s) (trade name(s) of manufacturer): …

      0.8.

      L1e — L7e

      Type: …

      0.8.1.

      L1e — L7e

      Commercial name(s) (if available): …

      0.8.2.

      L1e — L7e

      Type-approval number(s) (if available): …

      0.8.3.

      L1e — L7e

      Type-approval(s) issued on (date, if available): …

      0.9.

      Company name and address of manufacturer: …

      0.9.1.

      L1e — L7e

      Name(s) and address(es) of assembly plants: …

      0.9.2.

      L1e — L7e

      Name and address of manufacturer's authorised representative, if any: …

      0.10.

      Vehicle(s) for which the separate technical unit is intended for(21):

      0.10.1.

      L1e — L7e

      Type(17): …

      0.10.2.

      L1e — L7e

      Variant(17): …

      0.10.3.

      L1e — L7e

      Version(17): …

      0.10.4.

      L1e — L7e

      Commercial name(s) (if available): …

      0.10.5.

      L1e — L7e

      Category, subcategory and sub-subcategory of vehicle(2): …

      C.

      General information concerning vehicle, systems, components or separate technical units

      0.12.

      Conformity of production

      0.12.1.

      L1e — L7e

      Description of overall quality-assurance management systems.

      1.

      GENERAL CONSTRUCTION CHARACTERISTICS

      1.4.

      L1e — L7e

      Chassis (if any) (overall drawing): …

      1.5.

      L2e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C

      Material used for the bodywork: …

      1.7.

      L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C

      Hand of drive: left/right/centre(4): …

      6.

      INFORMATION ON FUNCTIONAL SAFETY

      6.14.

      Safety belts and/or other restraints

      6.14.1.

      L2e, L4e, L5e-B, L6e-B, L7e

      Number and position of safety belts and restraint systems and seats on which they can be used, please fill out table below:

      (L = left side, R = right side, C = centre)

      Safety belt configuration and associated information

      Complete EU type-approval mark

      Variant, if applicable

      Belt adjustment device for height (indicate yes/no/optional)

      First row of seats

      L

      C

      R

      Second row of seats

      L

      C

      R

      L = left, C = centre, R = right

      6.14.2.

      L2e, L4e, L5e-B, L6e-B, L7e

      Description of a specific type of belt, with one anchorage attached to the seat back-rest or incorporating an energy-dissipation device: …

      6.14.3.

      L2e, L4e, L5e-B, L6e-B, L7e

      Number and location of the anchorages: …

      6.14.4.

      L2e, L4e, L5e-B, L6e-B, L7e

      Brief description of electrical/electronic components: …

      6.15.

      Safety belt anchorages

      6.15.1.

      L2e, L4e, L5e-B, L6e-B, L7e

      Photographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point: …

      6.15.2.

      L2e, L4e, L5e-B, L6e-B, L7e

      Drawings of the anchorages and the parts of the vehicle structure to which they are attached (together with a statement on the nature of the materials used): …

      6.15.3.

      L2e, L4e, L5e-B, L6e-B, L7e

      Designation of the types of belts(14) authorised for attachment to the anchorages on the vehicle: …

      Safety-belt anchorage configuration and associated information

      Anchorage location

      Vehicle structure

      Seat structure

      First row of seats

      Right-hand seat

      Lower anchorages

      Upper anchorages

      outboard inboard

      Centre seat

      Lower anchorages

      Upper anchorages

      right left

      Left-hand seat

      Lower anchorages

      Upper anchorages

      outboard inboard

      Second row of seats

      Right-hand seat

      Lower anchorages

      Upper anchorages

      outboard inboard

      Centre seat

      Lower anchorages

      Upper anchorages

      right left

      Left-hand seat

      Lower anchorages

      Upper anchorages

      outboard inboard

      6.15.4.

      L2e, L4e, L5e-B, L6e-B, L7e

      Type-approval mark for each position: …

      6.15.5.

      L2e, L4e, L5e-B, L6e-B, L7e

      Special devices (example: seat-height adjustment, preloading device, etc.): …

      6.15.6.

      L2e, L4e, L5e-B, L6e-B, L7e

      Photographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point: …

      6.15.7.

      L2e, L4e, L5e-B, L6e-B, L7e

      Observation: …’;

    16. (p)

      the following Appendix 11b is inserted:

      ‘Appendix 11bModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a steer-ability, cornering properties and turn ability system

      Item No.

      (Sub) categories

      Detailed information

      B.

      General information concerning systems, components or separate technical units

      0.7.

      L1e — L7e

      Make(s) (trade name(s) of manufacturer): …

      0.8.

      L1e — L7e

      Type: …

      0.8.1.

      L1e — L7e

      Commercial name(s) (if available): …

      0.8.2.

      L1e — L7e

      Type-approval number(s) (if available): …

      0.8.3.

      L1e — L7e

      Type-approval(s) issued on (date, if available): …

      0.9.

      Company name and address of manufacturer: …

      0.9.1.

      L1e — L7e

      Name(s) and address(es) of assembly plants: …

      0.9.2.

      L1e — L7e

      Name and address of manufacturer's authorised representative, if any: …

      0.10.

      Vehicle(s) for which the separate technical unit is intended for(21):

      0.10.1.

      L1e — L7e

      Type(17): …

      0.10.2.

      L1e — L7e

      Variant(17): …

      0.10.3.

      L1e — L7e

      Version(17): …

      0.10.4.

      L1e — L7e

      Commercial name(s) (if available): …

      0.10.5.

      L1e — L7e

      Category, subcategory and sub-subcategory of vehicle(2): …

      C.

      General information concerning vehicle, systems, components or separate technical units

      0.12.

      Conformity of production

      0.12.1.

      L1e — L7e

      Description of overall quality-assurance management systems.

      1.

      GENERAL CONSTRUCTION CHARACTERISTICS

      1.1.

      L1e — L7e

      Photographs and/or drawings of a representative vehicle: …

      1.3.

      L1e — L7e

      Number of axles and wheels: …

      1.3.1.

      L1e — L7e

      Axles with twinned wheels(23): …

      1.3.2.

      L1e — L7e

      Powered axles(23): …

      1.7.

      L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C

      Hand of drive: left/right/centre(4): …

      1.8.

      Propulsion unit performance

      1.8.1.

      L3e, L4e, L5e, L7e-A, L7e-B2

      Declared maximum vehicle speed: …km/h

      1.8.2.

      L1e, L2e, L6e, L7e-B1, L7e-C

      Maximum design vehicle speed(22): …km/h and gear in which it is reached: …

      2.

      MASSES AND DIMENSIONS

      (in kg and mm.) refer to drawings where applicable

      2.1

      Range of vehicle mass (overall)

      2.1.3.

      L1e — L7e

      Technically permissible maximum laden mass: …kg

      2.1.3.1.

      L1e — L7e

      Technically permissible maximum mass on front axle: …kg

      2.1.3.2.

      L1e — L7e

      Technically permissible maximum mass on rear axle: …kg

      2.1.3.3.

      L4e

      Technically permissible maximum mass on sidecar axle: …kg

      2.2.

      Range of vehicle dimensions (overall)

      2.2.1.

      L1e — L7e

      Length: …mm

      2.2.2.

      L1e — L7e

      Width: …mm

      2.2.3.

      L1e — L7e

      Height: …mm

      2.2.4.

      L1e — L7e

      Wheelbase: …mm

      2.2.4.1.

      L4e

      Wheelbase sidecar(28): …mm

      2.2.5.

      Track width

      2.2.5.1.

      L1e — L7e if equipped with twinned wheels L2e, L4e, L5e, L6e, L7e

      Track width front: …mm.

      2.2.5.2.

      L1e — L7e if equipped with twinned wheels

      Track width rear: …mm.

      2.2.5.3.

      L2e, L4e, L5e, L6e, L7e

      Track width sidecar: …mm.

      2.2.6.

      L7e-B

      Front overhang: …mm.

      2.2.7.

      L7e-B

      Rear overhang: …mm.

      3.

      GENERAL POWERTRAIN CHARACTERISTICS

      3.5.

      Drive-train and control(13)

      3.5.1.

      L1e — L7e

      Brief description and schematic drawing of the vehicle drive-train and its control system (gear shift control, clutch control or any other element of drive-train): …

      3.6.

      Safe-cornering device

      3.6.1.

      L1e — L7e equipped with twinned wheels, L2e, L5e, L6e, L7e

      Safe-cornering device (Annex VIII to Regulation (EU) No 168/2013: yes/no(4); differential/other(4)

      3.6.2.

      L1e — L7e equipped with twinned wheels, L2e, L5e, L6e, L7e

      Differential lock: yes/no/optional(4)

      3.6.3.

      L1e — L7e

      Brief description and schematic drawing of the safe-cornering device, the differential lock and their control systems: …

      3.7.

      Suspension and control

      3.7.1.

      L1e — L7e

      Brief description and schematic drawing of suspension and its control system: …

      6.

      INFORMATION ON FUNCTIONAL SAFETY

      6.17.

      Steer-ability, cornering properties and turn-ability

      6.17.1.

      L1e — L7e

      Schematic diagram of steered axle(s) showing steering geometry: …

      6.17.2.

      Transmission and control of steering

      6.17.2.1.

      L1e — L7e

      Configuration of steering transmission (specify for front and rear): …

      6.17.2.2.

      L1e — L7e

      Linkage to wheels (including other than mechanical means; specify for front and rear): …

      6.17.2.2.1.

      L1e — L7e

      A brief description of the electrical/electronic components: …

      6.17.2.3.

      L1e — L7e

      Diagram of the steering transmission: …

      6.17.2.4.

      L2e, L5e, L6e, L7e

      Schematic diagram(s) of the steering control(s): …

      6.17.2.5.

      L2e, L5e, L6e, L7e

      Range and method of adjustment of the steering control(s): …

      6.17.2.6.

      L2e, L5e, L6e, L7e

      Method of assistance: …

      6.17.3.

      Maximum steering angle of the wheels

      6.17.3.1.

      L1e — L7e

      To the right: …degrees; number of turns of the steering wheel (or equivalent data): …

      6.17.3.2.

      L1e — L7e

      To the left: …degrees; number of turns of the steering wheel (or equivalent data): …

      6.18.

      Tyres/wheels combination

      6.18.1.

      Tyres:

      6.18.1.1.

      Size designation

      6.18.1.1.1.

      L1e — L7e

      Axle 1: …

      6.18.1.1.2.

      L1e — L7e

      Axle 2: …

      6.18.1.1.3.

      L4e

      Sidecar wheel: …

      6.18.1.4.

      L1e — L7e

      Tyre pressure(s) as recommended by the vehicle manufacturer: …kPa’;

    17. (q)

      the following Appendix 13a is inserted:

      ‘Appendix 13aModel information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a vehicle occupant protection, including interior fittings, head restraint and vehicle doors system

      Item No.

      (Sub) categories

      Detailed information

      B.

      General information concerning systems, components or separate technical units

      0.7.

      L1e — L7e

      Make(s) (trade name(s) of manufacturer): …

      0.8.

      L1e — L7e

      Type: …

      0.8.1.

      L1e — L7e

      Commercial name(s) (if available): …

      0.8.2.

      L1e — L7e

      Type-approval number(s) (if available): …

      0.8.3.

      L1e — L7e

      Type-approval(s) issued on (date, if available): …

      0.9.

      Company name and address of manufacturer: …

      0.9.1.

      L1e — L7e

      Name(s) and address(es) of assembly plants: …

      0.9.2.

      L1e — L7e

      Name and address of manufacturer's authorised representative, if any: …

      0.10.

      Vehicle(s) for which the separate technical unit is intended for(21):

      0.10.1.

      L1e — L7e

      Type(17): …

      0.10.2.

      L1e — L7e

      Variant(17): …

      0.10.3.

      L1e — L7e

      Version(17): …

      0.10.4.

      L1e — L7e

      Commercial name(s) (if available): …

      0.10.5.

      L1e — L7e

      Category, subcategory and sub-subcategory of vehicle(2): …

      C.

      General information concerning vehicle, systems, components or separate technical units

      0.12.

      Conformity of production

      0.12.1.

      L1e — L7e

      Description of overall quality-assurance management systems.

      1.

      GENERAL CONSTRUCTION CHARACTERISTICS

      1.7.

      L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C

      Hand of drive: left/right/centre(4): …

      6.

      INFORMATION ON FUNCTIONAL SAFETY

      6.16.

      Seating positions (saddles and seats)

      6.16.1.

      L1e — L7e

      Number of seating positions: …

      6.16.1.1.

      L2e, L5e, L6e, L7e

      Location and arrangement(8): …

      6.16.2.

      L1e — L7e

      Seating position configuration: seat/saddle(4)

      6.16.3.

      L1e — L7e

      Description and drawings of:

      6.16.3.1.

      L1e — L7e

      The seats and their anchorages: …

      6.16.3.2.

      L1e — L7e

      The adjustment system: …

      6.16.3.3.

      L1e — L7e

      The displacement and locking systems: …

      6.16.3.4.

      L1e — L7e

      The seat-belt anchorages incorporated in the seat structure: …

      6.16.3.5.

      L1e — L7e

      The parts of the vehicle used as anchorages: …

      6.16.4.

      L2e, L4e, L5e-B, L6e-B, L7e

      Coordinates or drawing of the R-point(s) of all seating positions: …

      6.16.4.1.

      L2e, L4e, L5e-B, L6e-B, L7e

      Driver's seat: …

      6.16.4.2.

      L2e, L4e, L5e-B, L6e-B, L7e

      All other seating positions: …

      6.16.5.

      L1e — L7e

      Design torso angle: …

      6.16.5.1.

      L1e — L7e

      Driver's seat: …

      6.16.5.2.

      L1e — L7e

      All other seating positions: …

      6.20.

      Vehicle occupant protection, including interior fittings and vehicle doors

      6.20.1.

      Bodywork

      6.20.1.1.

      L2e, L5e-B, L6e-B, L7e

      Materials used and methods of construction:

      6.20.2.

      Occupant doors, latches and hinges

      6.20.2.1.

      L2e, L5e, L6e, L7e

      Number of doors, and its configuration, dimensions and maximum angle of opening(5): …

      6.20.2.2.

      L2e, L5e, L6e, L7e

      Drawing of latches and hinges and of their position in the doors: …

      6.20.2.3.

      L2e, L5e, L6e, L7e

      Technical description of latches and hinges: …

      6.20.2.4.

      L2e, L5e, L6e, L7e

      Details, including dimensions, of entrances, steps and necessary handles where applicable: …

      6.20.3.

      Interior protection for occupants)

      6.20.3.1.

      L2e, L5e, L6e, L7e

      Photographs, drawings and/or an exploded view of the interior fittings, showing the parts in the passenger compartment and the materials used (with the exception of interior rear view mirrors, arrangement of controls, seats and the rear part of seats), roof and opening roof, backrest: …

      6.20.4.

      Head restraints

      6.20.4.1.

      L2e, L5e, L6e, L7e

      Head restraints: integrated/detachable/separate(4)

      6.20.4.2.

      L2e, L5e, L6e, L7e

      Detailed description of the head restraint, specifying in particular the nature of the padding material or materials and, where applicable, the position and specifications of the braces and anchorage pieces for the type of seat for which approval is sought: …

      6.20.4.3.

      L2e, L5e, L6e, L7e

      In the case of a ‘separate’ head restraint

      6.20.4.3.1.

      L2e, L5e, L6e, L7e

      Detailed description of the structural zone to which the head restraint is intended to be fixed: …

      6.20.4.3.2.

      L2e, L5e, L6e, L7e

      Scale drawings of the significant parts of the structure and the head restraint: …’;

    18. (r)

      the following Appendix 20a is inserted:

      ‘Appendix 20aModel information document relating to EU type-approval of a fuel tank as a STU

      Item No.

      (Sub) categories

      Detailed information

      B.

      General information concerning systems, components or separate technical units

      0.7.

      L1e — L7e

      Make(s) (trade name(s) of manufacturer): …

      0.8.

      L1e — L7e

      Type: …

      0.8.1.

      L1e — L7e

      Commercial name(s) (if available): …

      0.8.2.

      L1e — L7e

      Type-approval number(s) (if available): …

      0.8.3.

      L1e — L7e

      Type-approval(s) issued on (date, if available): …

      0.9.

      Company name and address of manufacturer: …

      0.9.1.

      L1e — L7e

      Name(s) and address(es) of assembly plants: …

      0.9.2.

      L1e — L7e

      Name and address of manufacturer's authorised representative, if any: …

      0.10.

      Vehicle(s) for which the separate technical unit is intended for(21):

      0.10.1.

      L1e — L7e

      Type(17): …

      0.10.2.

      L1e — L7e

      Variant(17): …

      0.10.3.

      L1e — L7e

      Version(17): …

      0.10.4.

      L1e — L7e

      Commercial name(s) (if available): …

      0.10.5.

      L1e — L7e

      Category, subcategory and sub-subcategory of vehicle(2): …

      C.

      General information concerning vehicle, systems, components or separate technical units

      0.12.

      Conformity of production

      0.12.1.

      L1e — L7e

      Description of overall quality-assurance management systems.

      4.

      GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE

      4.3.

      Evaporative emission control system

      4.3.7.

      L1e — L7e

      Schematic drawing of the fuel tank, indicating capacity and material:

      7.

      INFORMATION ON VEHICLE CONSTRUCTION

      7.5.

      Fuel storage

      7.5.1.1.

      Fuel tank

      7.5.1.1.1.

      L1e — L7e

      Maximum capacity: …

      7.5.1.1.2.

      L1e — L7e

      Materials used: …

      7.5.1.1.3.

      L1e — L7e

      Fuel tank inlet: restricted orifice/label(4)…

      7.5.1.3.

      L1e — L7e

      Drawing and technical description of the tank with connections and lines of the breathing and venting system, locks, valves, fastening devices: …

      7.5.2.

      Compressed natural gas (CNG) container

      7.5.2.1.

      L1e — L7e

      Applicable information document set out in UNECE regulation No 11021 as prescribed for vehicle category M1 shall supplement this information document with regards to the CNG container and related equipment.

      7.5.3.

      L1e — L7e

      Liquefied petroleum gas (LPG)container(s)

      7.5.3.1.

      L1e — L7e

      Applicable information document set out in UNECE regulation No 6722 as prescribed for vehicle category M1 shall supplement this information document with regards to the LPG container and related equipment.
    19. (s)

      Appendix 24 is replaced by the following:

      ‘Appendix 24Manufacturer's declaration for vehicles capable of converting their performance level from subcategory (L3e/L4e)-A2 to (L3e/L4e)-A3 and vice versa

      Manufacturer's declaration of conversion of (L3e/L4e)-A2 to (L3e/L4e)-A3 motorcycle characteristics and vice-versa

      A duly-completed version of this statement shall be included in the information folder.

      The undersigned: […(full name and position)]

      0.4.

      Company name and address of manufacturer: …

      0.4.2.

      Name and address of the manufacturer's representative (if any)(0): …

      Declares that

      The (L3e/L4e)-A2 or (L3e/L4e)-A3(1) motorcycle:

      0.2.

      Type(4): …

      0.2.1.

      Variant(s)(4): …

      0.2.2.

      Version(s)(4): …

      0.2.3

      Commercial name(s) (if available): …

      0.3.

      Category, subcategory and sub-subcategory of vehicle(5): …

      1.

      Type-approval number (if available): …

      1.1.

      Type-approval issued on (date, if available): …

      3.2.2.1.

      PCUs/ECUs(1) software identification number(s): …and calibration verification number(s): …

      is technically suitable to be retrofitted to the (L3e/L4e)-A2 or (L3e/L4e)-A3(1) vehicle identified below:

      0.2.

      Type(4): …

      0.2.1.

      Variant(s)(4): …

      0.2.2.

      Version(s)(4): …

      0.2.3

      Commercial name(s) (if available): …

      0.3.

      Category, subcategory and sub-subcategory of vehicle(5): …

      1.

      Type-approval number (if available): …

      1.1.

      Type-approval issued on (date, if available): …

      3.2.2.1.

      PCUs/ECUs(1) software identification number(s): …and calibration verification number(s): …

      With the following technical characteristics:

      General construction characteristics(3)

      1.8.

      Maximum design vehicle speed: …km/h

      1.9.

      Maximum net power: …kW (at …min-1)(1)

      1.10.

      Ratio maximum net power/mass of the vehicle in running order: …kW/kg

      Environmental performance(3)

      4.0.6.

      Sound level measured according to(2): …

      4.0.6.1.

      Stationary: …dB(A) at engine speed: …min-1

      4.0.6.2.

      Drive-by: …dB(A)

      4.0.6.3.

      Limit value for Lurban (0)(7): …dB(A)

      3.2.15.

      Exhaust emissions measured according to(2): …

      3.2.15.1.

      Type I test: tailpipe emissions after cold start, including the deterioration factor:

      • CO: …mg/km

      • THC: …mg/km

      • NMHC(0): …mg/km

      • NOx: …mg/km

      • THC+NOx(0): …mg/km

      • PM(0): …mg/km

      8.7.3.2.

      Type II test: tailpipe emissions at (increased) idle and free acceleration:

      • HC: …ppm at normal idling speed and: …ppm at high idle speed

      • CO: …% vol. at normal idling speed and: …% vol. at high idle speed

      8.7.3.2.1.

      Smoke corrected absorption coefficient: …m–1

      Energy efficiency measured according to(2)(3):

      4.0.2.

      Fuel consumption(0)(6): …l or kg/100 km

      4.0.3.

      CO2 emissions(0)(6): …g/km

      4.0.4.

      Energy consumption(0)(6): …Wh/km

      4.0.5.

      Electric range(0): …km

      by modifying the following components, parts, software, etc.: …

      …

      Place: …

      Date: …

      Signature: …

      Name and position in the company: …

      Explanatory notes relating to Appendix 24(Footnotes and explanations not to be stated on the Manufacturer's declaration)

      (0)

      Suppress the entry if not applicable.

      (1)

      Delete where not applicable (no deletion required when more than one entry is applicable).

      (2)

      Number of the Commission Delegated Regulation and latest amending Commission Delegated Regulation applicable to the type-approval. In the case of a Commission Delegated Regulation with two or more implementation stages; indicate also the implementation stage and/or code. Alternatively indicate the number of the applicable UNECE Regulation.

      (3)

      Round the units of measure to the nearest whole number for dB(A), Wh/ km, mg/ km, g/km, ppm and km; to the nearest tenth for kW, l/ 100 km, kg/ 100 km, m3/ 100 km and for % vol; and to the nearest hundredth for kW/ kg and for m–1.

      (4)

      Indicate the alphanumeric code Type-Variant-Version or ‘TVV’ allocated to each type, variant and version as set out in point 2.3 of Part B of Annex I.

      (5)

      Classified according to Article 4 of and Annex I to Regulation (EU) No 168/2013, the coding shall be indicated, e.g. ‘L3e-A2’ for a medium-performance motorcycle.

      (6)

      For externally chargeable hybrid electric vehicles, the “weighted, combined” values for CO2, fuel consumption and electric energy consumption shall be indicated.

      (7)

      Only applicable for vehicle category L3e.’

    20. (t)

      the explanatory notes relating to Annex I are amended as follows:

      1. (i)

        explanatory note (16) is replaced by the following:

        ‘(16)

        Rounded to the nearest whole number for dB(A).’;

      2. (ii)

        explanatory note (24) is replaced by the following:

        ‘(24)

        For vehicles equipped with CVT indicate the following: 1 “gear ratio at maximum design vehicle speed”; 2 “gear ratio at maximum peak power”; 3 “gear ration at maximum peak torque”. The gear ratios shall include the gear ratio of the primary transmission ratio (if applicable) and be supplemented with an acceptable tolerance band to the satisfaction of the approval authority. For wheel hub engines without gear drive, indicate “n/a” or “1”.’.

  2. (2)

    Annex IV is amended as follows:

    1. (a)

      Appendix 1 is amended as follows:

      1. (i)

        in MODEL A — Section 1, the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) issued on ( …date of issue) and’ are replaced by the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) (CV*… type-approval number including extension number)(3i) issued on ( …date of issue) (CV* …date of issue)(3i) and’;

      2. (ii)

        in MODEL B — Section 1, the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) issued on ( …date of issue) and’ are replaced by the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) (CV*… type-approval number including extension number)(3i) issued on ( …date of issue) (CV* …date of issue)(3i) and’;

      3. (iii)

        in MODEL C — Section 1, the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) issued on ( …date of issue) and’ are replaced by the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) (CV*… type-approval number including extension number)(3i) issued on ( …date of issue) (CV* …date of issue)(3i) and’;

      4. (iv)

        in Section 2, the heading ‘Section 2’ is replaced by the following:

        ‘SECTION 2(O)’;
      5. (v)

        in Section 2, entry 4.0.1. is replaced by the following:

        ‘4.0.1.

        Environmental step: Euro …(3/4/5) (1)’

      6. (vi)

        in Section 2, entries 4.0.2., 4.0.2.1. and 4.0.2.2. are deleted;

      7. (vii)

        in Section 2, the following entries 4.0.6. to 4.0.6.3. are inserted after entry 4.0.1.:

        ‘4.0.6.

        Sound level measured according to(m):

        4.0.6.1.

        Stationary: …dB(A) (CV*: …dB(A))(3i) at engine speed: …min-1 (CV*: …min-1)(3i)

        4.0.6.2.

        Drive-by: …dB(A) (CV*: …dB(A))(3i)

        4.0.6.3.

        Limit value for Lurban(3r): …dB(A) (CV*: …dB(A))(3i)’;

      8. (viii)

        in Section 2, entry 3.2.15.1. is replaced by the following:

        ‘3.2.15.1.

        Type I test: tailpipe emissions after cold start, including the deterioration factor, if applicable:

        CO:

        mg/km

        (CV*:… mg/km)(3i)

        THC:

        mg/km

        (CV*:… mg/km)(3i)

        NMHC:

        mg/km (3)

        (CV*:… mg/km)(3i)

        NOx:

        mg/km

        (CV*:… mg/km)(3i)

        THC+NOx:

        mg/km(3)

        (CV*:… mg/km)(3i)

        PM:

        mg/km(3)

        (CV*:… mg/km)(3i)’

      9. (ix)

        in Section 2, the heading ‘Energy efficiency’, including all its entries, is replaced by the following:

        ‘Energy efficiency(m)(o):

        4.0.2.

        Fuel consumption(3)(q):

        l or kg/100 km

        (CV*:… l or kg/100 km)(3)(q)(3i)

        4.0.3.

        CO2 emissions(3)(q)(n):

        g/km

        (CV*:… g/km)(3)(q)(3i)

        4.0.4.

        Energy consumption(3)(q):

        Wh/km

        (CV*:… Wh/km)(3)(q)(3i)

        4.0.5.

        Electric range(3):

        km

        (CV*:… km)(3)(3i)’

    2. (b)

      Appendix 2 is amended as follows:

      1. (i)

        entry 0.3. is replaced by the following:

        ‘0.3.

        Category, subcategory and sub-subcategory of vehicle(6)(u):…’

      2. (ii)

        the heading ‘Energy efficiency’, including all its entries, is replaced by the following:

        ‘Energy efficiency:

        4.0.2.

        Fuel consumption(3)(q):

        l or kg/100 km

        (CV*:… l or kg/100 km)(3)(q)(3i)

        4.0.3.

        CO2 emissions(3)(q)(n):

        g/km

        (CV*:… g/km)(3)(q)(3i)

        4.0.4.

        Energy consumption(3)(q):

        Wh/km

        (CV*:… Wh/km)(3)(q)(3i)

        4.0.5.

        Electric range(3):

        km

        (CV*:… km)(3)(3i)’

    3. (c)

      the explanatory notes relating to Annex IV are amended as follows:

      1. (i)

        explanatory note (9) is replaced by the following:

        ‘(9)Indicate the following value according to the category of the vehicle:

        • for (sub) categories: L1e, L2e, L6e, L7e-B1, L7e-C: the measured maximum speed of the vehicle;

        • for (sub) categories L3e, L4e, L5e, L7e-A and L7e-B2: the maximum design vehicle speed.

        • for cycles designed to pedal (L1e): suppress this entry of the certificate of conformity’;

      2. (ii)

        explanatory note (n) is deleted;

      3. (iii)

        explanatory note (o) is replaced by the following:

        ‘(o)

        Round the values to the nearest whole number for dB(A), Wh/ km, mg/ km, g/km, ppm, mm, kg, km and km/ h; to the nearest tenth for kW, l/ 100 km, kg/ 100 km, m3/ 100 km and for % vol; and to the nearest hundredth for kW/ kg and for m-1.’;

      4. (iv)

        explanatory note (p) is deleted;

      5. (v)

        the second explanatory note (s) below explanatory note (t) is deleted;

      6. (vi)

        the following explanatory note (u) is inserted:

        ‘(u)

        The information contained in this entry shall be stated in entry No 04. “Vehicle category” of the certificates of conformity issued in accordance with the template set out in Annex IV to Directive 2002/24/EC.’;

      7. (vii)

        the following explanatory note (3r) is inserted:

        ‘(3r)

        Only applicable for vehicle category L3e’.

  3. (3)

    Annex V is amended as follows:

    1. (a)

      point 3.1.6. is replaced by the following:

      ‘3.1.6.

      The existence of measures taken by the manufacturer to ensure the traceability of the vehicle referred to in point 3.1.5. needs not be checked at the time of the type-approval.’;

    2. (b)

      point 3.2.8. is replaced by the following:

      ‘3.2.8.

      The vehicle identification number shall, if possible, be presented on a single line. When the VIN is marked on two lines, the beginning and the end of the VIN shall be limited by one symbol at the choice of the manufacturer which should neither be a Roman capital letter nor an Arabic numeral.’

    3. (c)

      in Appendix 1, point 5 is replaced by the following:

      ‘5.Example for a L3e-A3 motorcycle with additional information for the converted vehicle (CV), a L3e-A2 motorcycle, outside the clearly marked rectangle. In this case for the purpose of a temporary and reversible manufacturer's authorised modification to the first registered L3e-A3 motorcycle in order to register it nationally after its conversion as a reduced-power L3e-A2 configuration (e.g. for vehicle operators with A2 driving licence):

      MOTORUDOLPH

      L3e-A3

      e4*168/2013*2691

      JRM00DBP008002211

      84 dB(A) — 4 250 min-1

      max 352 kg

      L3e-A2

      e4*168/2013*2692

      83 dB(A) — 3 750 min-1

      35 kW’.

  4. (4)

    Annex VI is amended as follows:

    1. (a)

      in Appendix 1, in Section III, entry 2.1. is replaced by the following:

      ‘2.1.

      The approval is granted in accordance with Article 40 of Regulation (EU) No 168/2013 and the validity of the approval is thus limited to dd/mm/yyyy(6).’

    2. (b)

      Appendix 2 is amended as follows:

      1. (i)

        in Section III, entry 4.1. is replaced by the following:

        ‘4.1.

        The approval is granted in accordance with Article 40 of Regulation (EU) No 168/2013 and the validity of the approval is thus limited to dd/mm/yyyy(6).’

      2. (ii)

        in Section III, the first indent under ‘NB:’ is replaced by the following:

        1. ‘—

          If this model is used for type-approval of a vehicle as an exemption for new technology or new concept, pursuant to Article 40 of Regulation (EU) No 168/2013, the heading of the certificate shall read ‘EU WHOLE-VEHICLE PROVISIONAL TYPE-APPROVAL CERTIFICATE VALID ONLY ON THE TERRITORY OF …(5)’. The provisional type-approval certificate shall also specify the restrictions that have been imposed as to its validity and the waivers which have been applied in accordance with Article 30(4) of Regulation (EU) No 168/2013.’

      3. (iii)

        the explanatory notes related to Appendix 2 are replaced by the following:

        ‘Explanatory notes relating to Appendix 2(Footnotes and explanations not to be stated on the type-approval certificate)

        (1)

        Delete where not applicable.

        (2)

        Indicate the alphanumeric code Type-Variant-Version or ‘TVV’ allocated to each type, variant and version as set out in point 2.3 of Part B of Annex I.

        (3)

        Classified according to Article 4 of and Annex I to Regulation (EU) No 168/2013, the coding shall be indicated, e.g. ‘L3e-A1E’ for a low-performance Enduro motor-cycle.

        (4)

        See section 2.

        (5)

        Indicate the Member State.

        (6)

        Applicable only for type-approval of a vehicle as an exemption for new technology or new concept, pursuant to Article 40 of Regulation (EU) No 168/2013.

        (7)

        Applicable only for vehicle type-approval for a national small series, pursuant to Article 42 of Regulation (EU) No 168/2013.

        (8)

        Indicate only the latest amendment in case of an amendment of one or more Articles of Regulation (EU) 168/2013, according to the amendment applied for the EU type-approval.’;

    3. (c)

      in Appendix 4, in Section II, the following entries 4a. and 4a.1. are inserted before entry 5.:

      ‘4a.

      The approval is granted/extended/refused/withdrawn(1)

      4a.1.

      The approval is granted in accordance with Article 40 of Regulation (EU) No 168/2013 and its validity is thus limited to dd/mm/yyyy(5).’

    4. (d)

      Section II of Appendix 5 is amended as follows:

      1. (i)

        the following entries 4a. and 4a.1. are inserted before entry 5.:

        ‘4a.

        The approval is granted/extended/refused/withdrawn(1)

        4a.1.

        The approval is granted in accordance with Article 40 of Regulation (EU) No 168/2013 and its validity is thus limited to dd/mm/yyyy(5).’

      2. (ii)

        entry 5. is replaced by the following:

        ‘5.

        Restrictions of validity(1)(5): …’

      3. (iii)

        entry 6. is replaced by the following:

        ‘6.

        Waivers applied(1)(5): …’

  5. (5)

    Annex VII is amended as follows:

    1. (a)

      in point 4., table 1 is deleted;

    2. (b)

      point 5. is replaced by the following:

      ‘5.Codification for the numbering system of EU type-approval certificates of systems, components and separate technical units

      Table 1Codification for the numbering system of EU type-approval certificates of systems, components and separate technical units

      LIST I — Environmental and propulsion unit performance requirements

      System or component/separate technical unit (STU)

      Commission Delegated Regulation (EU) No

      alphanumerical character

      System: engine emissions (Euro 4 stage)

      134/2014

      A1

      System: engine emissions (Euro 5 stage)

      134/2014

      A2

      System: crankcase (point 1.3.1. and 1.3.2.) and evaporative emissions (point 1.4.1. to 1.4.3 of Annex IV to Regulation (EU) 168/2013)

      134/2014

      B1

      System: crankcase (point 1.3.1. and 1.3.2.) and evaporative emissions (point 1.4.4. to 1.4.6 of Annex IV to Regulation (EU) 168/2013)

      134/2014

      B2

      System: crankcase (point 1.3.1. and 1.3.2.) and evaporative emissions (point 1.4.7. to 1.4.8 of Annex IV to Regulation (EU) 168/2013)

      134/2014

      B3

      System: environmental on-board diagnostic (OBD Stage I: point 1.8.1. to 1.8.2 of Annex IV to Regulation (EU) 168/2013)

      134/2014

      C1

      System: environmental on-board diagnostic (OBD Stage II: point 1.8.3. of Annex IV to Regulation (EU) 168/2013)

      134/2014

      C2

      System: sound level

      134/2014

      D

      System: propulsion unit performance

      134/2014

      E

      System: maximum torque and a maximum net power of a propulsion unit

      134/2014

      E1

      STU: pollution-control device

      134/2014

      F

      STU: noise-abatement device

      134/2014

      G

      STU: exhaust device (pollution-control device and noise-abatement device)

      134/2014

      H

      LIST II — Vehicle functional safety requirements

      System or component/separate technical unit (STU)

      Commission Delegated Regulation (EU) No

      alphanumerical character

      System: braking

      3/2014

      J

      System: installation of lighting and light-signalling devices

      3/2014

      K

      System: roll-over protective structure (ROPS)

      3/2014

      L

      System: installation of tyres

      3/2014

      M

      System: installation of audible warning devices

      3/2014

      AA

      System: installation of glazing, windscreen wipers and defrosting and demisting devices

      3/2014

      AB

      System: identification of controls, tell-tales and indicators

      3/2014

      AC

      System: safety belt anchorages

      3/2014

      AD

      System: steer-ability, cornering properties and turn ability

      3/2014

      AE

      System: vehicle occupant protection, including interior fittings, head restraint and vehicle doors

      3/2014

      AF

      Component/STU: audible warning device

      3/2014

      N

      Component/STU: non-glazing front windscreen

      3/2014

      O

      Component/STU: windscreen washer device

      3/2014

      P

      Component/STU: rearward visibility device

      3/2014

      Q

      Component/STU: safety belts

      3/2014

      R

      Component/STU: seating position (saddle/seat)

      3/2014

      S

      LIST III — Vehicle construction and general type-approval requirements

      System or component/separate technical unit (STU)

      Commission Delegated Regulation (EU) No

      alphanumerical character

      System: functional on-board diagnostics (OBD Stage I: point 1.8.1. to 1.8.2 of Annex IV to Regulation (EU) 168/2013)

      44/2014

      T1

      System: functional on-board diagnostics (OBD Stage II: point 1.8.3. of Annex IV to Regulation (EU) 168/2013)

      44/2014

      T2

      STU: trailer coupling device

      44/2014

      U

      STU: devices to prevent unauthorised use

      44/2014

      V

      STU: passenger handholds

      44/2014

      W

      STU: footrests

      44/2014

      X

      STU: side-car

      44/2014

      Y

      STU: fuel tank

      44/2014

      Z’

  6. (6)

    Annex VIII is amended as follows:

    1. (a)

      item 2.2.1.3.3. is replaced by the following:

      ‘2.2.1.3.3.

      Type II test results(3):

      Table 5-2Test type II results

      Test

      HC (ppm)

      CO(% vol.)

      Lambda

      Engine speed (min-)

      Engine oil temperature (K)

      Measured & corrected value of absorption coefficient(m-1)

      PI: Low idle test

      —

      PI: High idle test

      —

      CI — Free acceleration test / Smoke opacity test results

      —

      —

      —

      —

      —’

    2. (b)

      items 2.2.1.8.6. and 2.2.1.8.7. are replaced by the following:

      ‘2.2.1.8.6.CO2 emissions and fuel consumption(3)

      Table 5-8Test Type VII result table for propulsions equipped with a combustion engine only or equipped with not-externally-chargeable (NOVC) hybrid electric propulsion

      Test Type VII Test Results (TRTTVII)

      Test No

      CO2(g/km)

      Fuel consumption(l/100km) or (kg/100 km)

      TRTTI Measured x1112

      1

      2

      3

      TRTTI Measured Mean1112

      Ki 11 13 15

      (no unit )

      TRTTVIIx 11 14 =

      Ki · TRTTI Measured x Mean

      CO2 and Fuel consumption as declared by the manufacturer

      —

      11

      Where applicable.

      12

      Round to 2 decimal places.

      13

      Round to 4 decimal places.

      15

      Set Ki = 1 in case:

      1. (a)

        the vehicle is not equipped with a periodically regenerating emission abatement system or;

      2. (b)

        the vehicle is not a hybrid electric vehicle.

      14

      Round to 0 decimal places

      2.2.1.8.7.CO2 emissions/fuel consumption (manufacturer's declared values)(3)

      Electric energy consumption and electric range(3):

      Table 5-9Test Type VII result table for pure electric propulsion or not-externally-chargeable (NOVC) propulsions equipped with an electric motor for propulsion

      Measured electric energy consumption(Wh/km)

      Declared electric energy consumption(Wh/km)

      Measured electric range(km)

      Declared electric range(km)

      Pure electric powertrain

      NOVC hybrid electric powertrain’;

    3. (c)

      in point 2.2.1.10.9., Table 5-13 is replaced by the following:

      ‘Table 5-13Test result requirements regarding sound level

      Sound emission level

      Euro 4

      Euro 5

      Sound level limits

      Annex VI(D) to Regulation (EU) No 168/2013

      Equivalent UNECE sound level limits to Annex VI(D) to Regulation (EU) No 168/2013

      Annex VI(D) to Regulation (EU) No 168/2013

      Test requirements

      Annex VIII to Regulation (EU) No 168/2013

      UNECE Regulations referred to in Annex VI(D) to Regulation (EU) No 168/2013

      UNECE Regulations referred to in Annex VI(D) to Regulation (EU) No 168/2013

      Administrative requirements for vehicle subcategories regarding sound level:

      Vehicle (sub)categories

      L1e, L6e-A

      Annex I to UNECE Regulation No 63

      UNECE Regulation No 63

      L3e

      Annex I to UNECE Regulation No 41

      UNECE Regulation No 41

      L2e, L4e, L5e, L6e-B, L7e

      Annex I to UNECE Regulation No 9

      UNECE Regulation No 9

      Replacement exhaust noise-abatement devices all categories

      Annex I to UNECE Regulation No 92

      UNECE Regulation No 92’

    4. (d)

      in point 2.2.1.10.11., Table 5-14 is replaced by the following:

      ‘Table 5-14Sound level test results Euro 4 or Euro 5

      Vehicle category

      Propulsion class

      Euro 4 sound level limitSLEU4 (dB(A)) / Euro 4 test results TRTTIXEU4 (dB(A))& (% of SLEU4)

      Euro 4 sound test procedure

      Euro 5 sound level limitSLEU5 (dB(A)) / Euro 5 test results TRTTIXEU5 (dB(A)) & (% of SLEU5)

      Euro 5 sound test procedure

      L1e-A

      PI / CI / Hybrid

      SLEU4:63

      Commission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 63

      SLEU5:

      UNECE Regulation No 63

      TRTTIXEU4:

      TRTTIXEU5:

      L1e-B

      PI / CI / Hybrid

      vmax ≤ 25 km/h

      SLEU4:66

      SLEU5:

      TRTTIXEU4:

      TRTTIXEU5:

      PI / CI / Hybrid

      vmax ≤ 45 km/h

      SLEU4:71

      SLEU5:

      TRTTIXEU4:

      TRTTIXEU5:

      L2e

      PI / CI / Hybrid

      SLEU4:76

      Commission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 9

      SLEU5:

      UNECE Regulation No 9

      STREU4:

      STREU5:

      L3e

      PI / CI / Hybrid

      PMR ≤ 25

      SLEU4:73

      UNECE Regulation No 41

      SLEU5:

      UNECE Regulation No 41

      TRTTIXEU4:

      TRTTIXEU5:

      PI / CI / Hybrid

      25 < PMR ≤ 50

      SLEU4:74

      SLEU5:

      STREU4:

      STREU5:

      PI / CI / Hybrid

      PMR > 50

      SLEU4:77

      SLEU5:

      TRTTIXEU4:

      TRTTIXEU5:

      L4e

      PI / CI / Hybrid

      SLEU4:80

      Commission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 9

      SLEU5:

      UNECE Regulation No 9

      TRTTIXEU4

      TRTTIXEU5:

      L5e-A

      PI / CI / Hybrid

      SLEU4:80

      Commission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 9

      SLEU5:

      UNECE Regulation No 9

      STREU4:

      STREU5:

      L5e-B

      PI / CI / Hybrid

      SLEU4:80

      SLEU5:

      STREU4:

      STREU5:

      L6e-A

      PI / CI / Hybrid

      SLEU4:80

      Commission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 63

      SLEU5:

      UNECE Regulation No 63

      TRTTIXEU4:

      TRTTIXEU5:

      L6e-B

      PI / CI / Hybrid

      SLEU4:80

      Commission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 9

      SLEU5:

      UNECE Regulation No 9

      TRTTIXEU4:

      TRTTIXEU5:

      L7e-A

      PI / CI / Hybrid

      SLEU4:80

      SLEU5:

      TRTTIXEU4:

      TRTTIXEU5:

      L7e-B

      PI / CI / Hybrid

      SLEU4:80

      SLEU5:

      TRTTIXEU4:

      TRTTIXEU5:

      L7e-C

      PI / CI / Hybrid

      SLEU4:80

      SLEU5:

      TRTTIXEU4

      TRTTIXEU5:’

    5. (e)

      items 2.2.1.10.12.and 2.2.1.10.13. are replaced by the following:

      ‘2.2.1.10.12.

      Stationary sound level: …dB(A) at engine speed: …min-1

      2.2.1.10.13.

      Replacement noise-abatement device(s) make(s) and type(s) (3): …’;

    6. (f)

      the following item 2.2.1.10.14. is inserted:

      ‘2.2.1.10.14.

      Location of the type-approval number (add drawings, photographs) (3): …’.