Commission Implementing Regulation (EU) 2016/1825
of 6 September 2016
amending Implementing Regulation (EU) No 901/2014 with regard to the administrative requirements for the approval and market surveillance of two- or three-wheel vehicles and quadricycles
(Text with EEA relevance)

THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles, and in particular Articles 27(4), 29(4), 30(2) and (3), 32(1), 38(2), 39(3), 40(4) and Article 72 thereof,
OJ L 60, 2.3.2013, p. 52.
Whereas:
(1) To allow the type-approval of fuel tanks as a separate technical unit, a specific information document containing the related information should be inserted as a new Appendix to Annex I to Commission Implementing Regulation (EU) No 901/2014.
Commission Implementing Regulation (EU) No 901/2014 of 18 July 2014 implementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of two- or three-wheel vehicles and quadricycles (OJ L 249, 22.8.2014, p. 1).
(2) In order to reduce the administrative burden on manufacturers, in particular with regard to vehicles of categories L6e and L7e, additional system type-approvals should be allowed.
(3) To ensure that in the case of vehicles equipped with Continuous Variable Transmission all relevant information is provided, the table specifying information on gear ratios to be entered into the information document should be amended.
(4) In order to establish a clear link between the two configurations of vehicles capable of converting their performance level from subcategory (L3e/L4e)-A2 to (L3e/L4e)-A3 and vice versa, and to facilitate vehicle owners' access to that information, an entry for the EU type-approval number of the original configuration should be added to the template set out in Appendix 24 to Annex I to Implementing Regulation (EU) No 901/2014 and to the template for the certificate of conformity set out in Annex IV to that Implementing Regulation.
(5) To provide further information in the case of new technologies and new concepts, additional entries should be inserted in the templates for type-approval certificates for systems, components or separate technical units.
(6) For the purposes of clarity and consistency some explanatory notes should be amended or deleted.
(7) Implementing Regulation (EU) No 901/2014 should therefore be amended accordingly.
(8) In order to allow additional time for manufacturers and national authorities to achieve a timely application of the amendments provided for in this Regulation, this Regulation should enter into force as a matter of urgency, especially taking into account that Regulation (EU) No 168/2013 became applicable on 1 January 2016 and that related administrative requirements will become compulsory with regard to all new vehicles registered or placed on the market as from 1 January 2018.
(9) The applicability of the amendments to the templates for the certificates of conformity should be deferred until 1 September 2017 in order to provide manufacturers and national authorities with additional lead-time for the adaptation of their administrative arrangements for the registration of vehicles, and in particular their information technology systems, to those amendments.
(10) The measures provided for in this Regulation are in accordance with the opinion of the committee referred to in Article 73(1) of Regulation (EU) No 168/2013,
HAS ADOPTED THIS REGULATION:

Article 1 Annexes I and IV to VIII to Implementing Regulation (EU) No 901/2014 are amended in accordance with the Annex to this Regulation.
Article 2 This Regulation shall enter into force on the first day following that of its publication in the Official Journal of the European Union.
Point 2 of the Annex shall apply from 1 September 2017.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 6 September 2016.
For the Commission
The President
Jean-Claude Juncker
ANNEX Implementing Regulation (EU) No 901/2014 is amended as follows:
(1) Annex I is amended as follows:
(a) in the list of Appendices, each of the following rows is inserted following their numerical order:

‘5a	Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a maximum torque and a maximum net power of a propulsion unit system	
8a	Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of audible warning devices system	
9a	Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of glazing, windscreen wipers and defrosting and demisting devices system	
9b	Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an identification of controls, tell-tales and indicators system	
11a	Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a safety belt anchorages system	
11b	Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a steer-ability, cornering properties and turn ability system	
13a	Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a vehicle occupant protection, including interior fittings, head restraint and vehicle doors system	
20a	Model information document relating to EU type-approval of a fuel tank as a STU	’

(b) in Part B, in point 2.2., in Table 1, in LIST I, the following row is inserted following its numerical order:

‘5a	System: maximum torque and a maximum net power of a propulsion unit	X Appendix 2	’

(c) in Part B, in point 2.2., in Table 1, in LIST II, each of the following rows is inserted following their numerical order:

‘8a	System: installation of audible warning devices	II	
9a	System: installation of glazing, windscreen wipers and defrosting and demisting devices	VII	
9b	System: identification of controls, tell-tales and indicators	VIII	
11a	System: safety belt anchorages	XII	
11b	System: steer-ability, cornering properties and turn ability	XIV	
13a	System: vehicle occupant protection, including interior fittings, head restraint and vehicle doors	XVII	’

(d) in Part B, in point 2.2., in Table 1, in LIST III, each of the following rows is inserted following their numerical order:

‘20a	STU: fuel tank	IX	’

(e) in Part B, in point 2.8., the table relating to information document data entries is amended as follows:
(i) the following information document data entry 3.3.3.4. is inserted:

‘3.3.3.4.	L1e — L7e	15/30(4) minutes power(27): …kW’

(ii) the information document data entry 3.5.4. is replaced by the following:

‘3.5.4. Gear ratios
L1e — L7e	Overview gear ratios			
Gear(24)	Internal transmission ratios (ratios of engine to transmission output shaft revolutions)	Final drive ratio(s) (ratio of transmission output shaft to driven wheel revolutions)	Total gear ratios	Ratio (engine speed/vehicle speed) for manual transmission only
1 2 3 …				
Reverse				’

(iii) the information document data entry 4.0.1. is replaced by the following:

‘4.0.1.	L1e — L7e	Environmental step: Euro …(3/4/5) (4)’

(iv) the following information document data entries 4.0.2. to 4.0.5. are inserted:

‘4.0.2.	L1e — L7e	Fuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km
4.0.3.	L1e — L7e	CO2 emissions(25): …g/km
4.0.4.	L1e — L7e	Energy consumption(25): …Wh/km
4.0.5.	L1e — L7e	Electric range(25): …km’

(f) Appendix 3 is amended as follows:
(i) the information document data entry 4.0.1. is replaced by the following:

‘4.0.1.	L1e — L7e	Environmental step: Euro …(3/4/5) (4)’

(ii) the following information document data entries 4.0.2. to 4.0.5. are inserted:

‘4.0.2.	L1e — L7e	Fuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km
4.0.3.	L1e — L7e	CO2 emissions(25): …g/km
4.0.4.	L1e — L7e	Energy consumption(25): …Wh/km
4.0.5.	L1e — L7e	Electric range(25): …km’

(g) Appendix 4 is amended as follows:
(i) the information document data entries 4.0.2., 4.0.2.1. and 4.0.2.2. are deleted;
(ii) the following information document data entries 4.0.6. and 4.0.6.1. are inserted:

‘4.0.6.	Sound level	
4.0.6.1.	L3e	Limit value for Lurban(16): …dB(A)’;

(h) the following Appendix 5a is inserted:

‘Appendix 5a Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a maximum torque and a maximum net power of a propulsion unit system
Item No.	(Sub) categories	Detailed information
B.		General information concerning systems, components or separate technical units
0.7.	L1e — L7e	Make(s) (trade name(s) of manufacturer): …
0.8.	L1e — L7e	Type: …
0.8.1.	L1e — L7e	Commercial name(s) (if available): …
0.8.2.	L1e — L7e	Type-approval number(s) (if available): …
0.8.3.	L1e — L7e	Type-approval(s) issued on (date, if available): …
0.9.		Company name and address of manufacturer: …
0.9.1.	L1e — L7e	Name(s) and address(es) of assembly plants: …
0.9.2.	L1e — L7e	Name and address of manufacturer's authorised representative, if any: …
0.10.		Vehicle(s) for which the separate technical unit is intended for(21):
0.10.1.	L1e — L7e	Type(17): …
0.10.2.	L1e — L7e	Variant(17): …
0.10.3.	L1e — L7e	Version(17): …
0.10.4.	L1e — L7e	Commercial name(s) (if available): …
0.10.5.	L1e — L7e	Category, subcategory and sub-subcategory of vehicle(2): …
C.		General information concerning vehicle, systems, components or separate technical units
0.12.		Conformity of production
0.12.1.	L1e — L7e	Description of overall quality-assurance management systems.
1.		GENERAL CONSTRUCTION CHARACTERISTICS
1.8.		Propulsion unit performance
1.8.1.	L3e, L4e, L5e, L7e-A, L7e-B2	Declared maximum vehicle speed: …km/h
1.8.2.	L1e, L2e, L6e, L7e-B1, L7e-C	Maximum design vehicle speed(22): …km/h and gear in which it is reached: …
1.8.3.	L1e — L7e	Maximum net power combustion engine: …kW at …min-1 at A/F ratio: …
1.8.4.	L1e — L7e	Maximum net torque combustion engine: …Nm at …min-1 at A/F ratio: …
1.8.5.	L1e — L7e	Maximum continuous-rated power electric motor (15/30(4) minutes power(27)): …kW at …min-1
1.8.6.	L1e — L7e	Maximum continuous-rated torque electric motor: …Nm at …min-1
1.8.7.	L1e — L7e	Maximum continuous total power for propulsion(s): …kW at …min-1 at A/F ratio: …
1.8.8.	L1e — L7e	Maximum continuous total torque for propulsion(s): …Nm at …min-1 at A/F ratio: …
1.8.9.	L1e — L7e	Maximum peak power for propulsion(s): …kW at …min-1 at A/F ratio: …
3.		GENERAL POWERTRAIN CHARACTERISTICS
3.2.		Combustion engine
3.2.1.		Specific engine information
3.2.1.1.	L1e — L7e	Number of combustion engines: …
3.2.1.2.	L1e — L7e	Working principle: internal combustion engine (ICE)/positive ignition/compression ignition/external combustion engine (ECE)/turbine/compressed air(4): …
3.2.1.3.	L1e — L7e	Cycle: four-stroke/two-stroke/rotary/other(4):
3.2.1.4.	L1e — L7e	Cylinders
3.2.1.4.1.	L1e — L7e	Number: …
3.2.1.4.2.	L1e — L7e	Arrangement(26): …
3.2.1.4.3.	L1e — L7e	Bore(12): …mm
3.2.1.4.4.	L1e — L7e	Stroke(12): …mm
3.2.1.4.5.	L1e — L7e	Number and configuration of stators in the case of rotary-piston engine: …
3.2.1.4.6.	L1e — L7e	Volume of combustion chambers in the case of rotary-piston engine: …cm3
3.2.1.4.7.	L1e — L7e	Firing order: …
3.2.1.5.	L1e — L7e	Engine capacity(6): …cm3
3.2.1.6.	L1e — L7e	Volumetric compression ratio(7): …
3.3.		Pure electric and hybrid electric propulsion and control
3.3.3.4.	L1e — L7e	15/30(4) minutes power(27): …kW’

(i) Appendix 6 is amended as follows:
(i) the information document data entry 4.0.1. is replaced by the following:

‘4.0.1.	L1e — L7e	Environmental step: Euro …(3/4/5) (4)’

(ii) the following information document data entries 4.0.2. to 4.0.5. are inserted:

‘4.0.2.	L1e — L7e	Fuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km
4.0.3.	L1e — L7e	CO2 emissions(25): …g/km
4.0.4.	L1e — L7e	Energy consumption(25): …Wh/km
4.0.5.	L1e — L7e	Electric range(25): …km’

(j) Appendix 7 is amended as follows:
(i) the information document data entries 4.0.1. and 4.0.2. are replaced by the following:

‘4.0.1.	L1e — L7e	Environmental step: Euro …(3/4/5) (4)
4.0.2.	L1e — L7e	Fuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km’

(ii) the information document data entries 4.0.2.1. and 4.0.2.2. are deleted;
(iii) the following information document data entries 4.0.3. to 4.0.6.1. are inserted:

‘4.0.3.	L1e — L7e	CO2 emissions(25): …g/km
4.0.4.	L1e — L7e	Energy consumption(25): …Wh/km
4.0.5.	L1e — L7e	Electric range(25): …km
4.0.6.		Sound level
4.0.6.1.	L3e	Limit value for Lurban(16): …dB(A)’

(k) Appendix 8 is amended as follows:
(i) the information document data entries 4.0.1. and 4.0.2. are replaced by the following:

‘4.0.1.	L1e — L7e	Environmental step: Euro …(3/4/5) (4)
4.0.2.	L1e — L7e	Fuel consumption (provide details for each reference fuel tested) …l/kg(4)/100 km’

(ii) the information document data entries 4.0.2.1. and 4.0.2.2. are deleted;
(iii) the following information document data entries 4.0.3. to 4.0.6.1. are inserted:

‘4.0.3.	L1e — L7e	CO2 emissions(25): …g/km
4.0.4.	L1e — L7e	Energy consumption(25): …Wh/km
4.0.5.	L1e — L7e	Electric range(25): …km
4.0.6.		Sound level
4.0.6.1.	L3e	Limit value for Lurban(16): …dB(A)’;

(l) the following Appendix 8a is inserted:

‘Appendix 8a Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of audible warning devices system
Item No.	(Sub) categories	Detailed information
B.		General information concerning systems, components or separate technical units
0.7.	L1e — L7e	Make(s) (trade name(s) of manufacturer): …
0.8.	L1e — L7e	Type: …
0.8.1.	L1e — L7e	Commercial name(s) (if available): …
0.8.2.	L1e — L7e	Type-approval number(s) (if available): …
0.8.3.	L1e — L7e	Type-approval(s) issued on (date, if available): …
0.9.		Company name and address of manufacturer: …
0.9.1.	L1e — L7e	Name(s) and address(es) of assembly plants: …
0.9.2.	L1e — L7e	Name and address of manufacturer's authorised representative, if any: …
0.10.		Vehicle(s) for which the separate technical unit is intended for(21):
0.10.1.	L1e — L7e	Type(17): …
0.10.2.	L1e — L7e	Variant(17): …
0.10.3.	L1e — L7e	Version(17): …
0.10.4.	L1e — L7e	Commercial name(s) (if available): …
0.10.5.	L1e — L7e	Category, subcategory and sub-subcategory of vehicle(2): …
C.		General information concerning vehicle, systems, components or separate technical units
0.12.		Conformity of production
0.12.1.	L1e — L7e	Description of overall quality-assurance management systems.
6.		INFORMATION ON FUNCTIONAL SAFETY
6.1.		Audible warning devices
6.1.1.	L1e — L7e	Summary description of device(s) used and their purpose: …
6.1.2.	L1e — L7e	Drawing(s) showing the location of the audible warning device(s) in relation to the structure of the vehicle: …
6.1.3.	L1e — L7e	Details of the method of attachment, including the part of the vehicle structure to which the audible warning device(s) is (are) attached: …
6.1.4.	L1e — L7e	Electrical/pneumatic circuit diagram: …
6.1.4.1.	L1e — L7e	Voltage: AC/DC(4)
6.1.4.2.	L1e — L7e	Rated voltage or pressure: …
6.1.5.	L1e — L7e	Drawing of the mounting device: …’;

(m) the following Appendix 9a is inserted:

‘Appendix 9a Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of glazing, windscreen wipers and defrosting and demisting devices system
Item No.	(Sub) categories	Detailed information
B.		General information concerning systems, components or separate technical units
0.7.	L1e — L7e	Make(s) (trade name(s) of manufacturer): …
0.8.	L1e — L7e	Type: …
0.8.1.	L1e — L7e	Commercial name(s) (if available): …
0.8.2.	L1e — L7e	Type-approval number(s) (if available): …
0.8.3.	L1e — L7e	Type-approval(s) issued on (date, if available): …
0.9.		Company name and address of manufacturer: …
0.9.1.	L1e — L7e	Name(s) and address(es) of assembly plants: …
0.9.2.	L1e — L7e	Name and address of manufacturer's authorised representative, if any: …
0.10.		Vehicle(s) for which the separate technical unit is intended for(21):
0.10.1.	L1e — L7e	Type(17): …
0.10.2.	L1e — L7e	Variant(17): …
0.10.3.	L1e — L7e	Version(17): …
0.10.4.	L1e — L7e	Commercial name(s) (if available): …
0.10.5.	L1e — L7e	Category, subcategory and sub-subcategory of vehicle(2): …
C.		General information concerning vehicle, systems, components or separate technical units
0.12.		Conformity of production
0.12.1.	L1e — L7e	Description of overall quality-assurance management systems.
1.		GENERAL CONSTRUCTION CHARACTERISTICS
1.7.	L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C	Hand of drive: left/right/centre(4): …
1.7.1.	L1e — L7e	Vehicle is equipped to be driven in right/left-hand traffic and in countries that use metric/metric and imperial units(4): …
3.		GENERAL POWERTRAIN CHARACTERISTICS
3.1		Manufacturer of the propulsion unit
3.1.1.		Combustion engine
3.1.1.1.	L1e — L7e	Manufacturer: …
3.1.1.2.	L1e — L7e	Engine code (as marked on the engine or other means of identification): …
3.1.2.		Electric motor
3.1.2.1.	L1e — L7e	Manufacturer: …
3.1.2.2.	L1e — L7e	Electric motor code (as marked on the engine or other means of identification): …
3.1.3.		Hybrid application
3.1.3.1.	L1e — L7e	Manufacturer: …
3.1.3.2.	L1e — L7e	Application code (as marked on the engine or other means of identification): …
3.2.		Combustion engine
3.2.1.		Specific engine information
3.2.1.2.	L1e — L7e	Working principle: internal combustion engine (ICE)/positive ignition/compression ignition/external combustion engine (ECE)/turbine/compressed air(4): …
3.2.1.3.	L1e — L7e	Cycle: four-stroke/two-stroke/rotary/other(4): …
3.2.1.4.	L1e — L7e	Cylinders
3.2.1.4.1.	L1e — L7e	Number: …
3.2.1.4.2.	L1e — L7e	Arrangement(26): …
3.2.1.5.	L1e — L7e	Engine capacity(6): …cm3
3.2.1.9.	L1e — L7e	Normal warm engine idling speed: …min-1
3.2.3.		Fuel
3.2.3.1.	L1e — L7e	Fuel type: (9)
3.2.3.2.	L1e — L7e	Vehicle fuel configuration: mono-fuel/bi- fuel/flex fuel(4)
3.2.10.		Powertrain cooling system and control
3.2.10.2.	L1e — L7e	Cooling system: liquid: yes/no(4)
3.2.10.2.2.	L1e — L7e	Nominal setting of the engine temperature control mechanism: …
3.2.10.2.3.	L1e — L7e	Nature of liquid: …
3.2.10.2.4.	L1e — L7e	Circulating pump(s): yes/no(4)
3.2.10.2.4.1.	L1e — L7e	Characteristics: …
3.2.10.2.5.	L1e — L7e	Drive ratio(s): …
3.2.10.2.6.	L1e — L7e	Description of the fan and its drive mechanism: …
3.2.10.3.	L1e — L7e	Air cooling: yes/no(4)
3.2.10.3.3.	L1e — L7e)	Fan: yes/no(4)
3.2.10.3.3.1.	L1e — L7e	Characteristics: …
3.2.13.		Other electrical systems and control than those intended for the electrical propulsion
3.2.13.1.	L1e — L7e	Rated voltage: …V, positive/negative ground(4)
3.2.13.2.	L1e — L7e	Generator: yes/no(4):
3.2.13.2.1.	L1e — L7e	Nominal output: …VA
3.3.		Pure electric and hybrid electric propulsion and control
3.3.3.		Electric propulsion motor
3.3.3.2.	L1e — L7e	Type (winding, excitation): …
3.3.3.3.	L1e — L7e	Operating voltage: …V
3.3.4.		Propulsion batteries
3.3.4.1.	L1e — L7e	Primary propulsion battery
3.3.4.1.1.	L1e — L7e	Number of cells: …
3.3.4.1.2.	L1e — L7e	Mass: …kg
3.3.4.1.3.	L1e — L7e	Capacity: …Ah (Amp-hours) / …V
3.3.4.1.5.	L1e — L7e	Position in the vehicle: …
3.3.4.2.	L1e — L7e	Secondary propulsion battery
3.3.4.2.1.	L1e — L7e	Number of cells: …
3.3.4.2.2.	L1e — L7e	Mass: …kg
3.3.4.2.3.	L1e — L7e	Capacity: …Ah (Amp-hours) / …V
3.3.4.2.5.	L1e — L7e	Position in the vehicle: …
3.3.5.		Hybrid electric vehicle
3.3.5.1.	L1e — L7e	Engine or motor combination (number of electric motor(s) and/or combustion engine(s)/other)(4): …
3.3.5.2.	L1e — L7e	Category of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging:
3.3.5.3.	L1e — L7e	Operating mode switch: with/without(4)
3.3.5.4.	L1e — L7e	Selectable modes: yes/no(4)
3.3.5.5.	L1e — L7e	Pure fuel consuming: yes/no(4)
3.3.5.6.	L1e — L7e	Vehicle propelled with fuel cell: yes/no(4)
3.3.5.7.	L1e — L7e	Hybrid operation modes: yes/no(4) (if yes, short description): …
3.3.6.		Energy storage device
3.3.6.1.	L1e — L7e	Description: (battery, capacitor, flywheel/generator)(4)
3.3.6.2.	L1e — L7e	Identification number: …
* 3.3.6.3.	L1e — L7e	Kind of electrochemical couple: …
3.3.6.4.	L1e — L7e	Energy (for battery: voltage and capacity Ah in 2h, for capacitor: J,…, for flywheel/generator: J,…,): …
3.3.6.5.	L1e — L7e	Charger: on-board/external/without(4)
3.4.		Other engines, electric motors or combinations (specific information concerning the parts of these motors)
3.4.1.		Cooling system (temperatures permitted by the manufacturer)
3.4.1.1.	L1e — L7e	Liquid cooling: …
3.4.1.1.1.	L1e — L7e	Maximum temperature at outlet: …K
3.4.1.2.	L1e — L7e	Air cooling: …
3.4.1.2.1.	L1e — L7e	Reference point: …
3.4.1.2.2.	L1e — L7e	Maximum temperature at reference point: …K
6.		INFORMATION ON FUNCTIONAL SAFETY
6.5.		Glazing, windscreen wipers and washers, and defrosting and demisting systems
6.5.1.		Windscreen
6.5.1.1.	L2e, L5e, L6e, L7e	Materials used: …
6.5.1.2.	L2e, L5e, L6e, L7e	Method of mounting: …
6.5.1.3.	L2e, L5e, L6e, L7e	Angle of inclination: …
6.5.1.4.	L2e, L5e, L6e, L7e	Windscreen accessories and the position in which they are fitted, together with a brief description of any electrical/electronic components: …
6.5.1.5.	L2e, L5e, L6e, L7e	Drawing of the windscreen with dimensions: …
6.5.2.		Other windows
6.5.2.1.	L2e, L5e, L6e, L7e	Materials used: …
6.5.2.2	L2e, L5e, L6e, L7e	A brief description of the electrical/electronic components (if any) of the window lifting mechanism: …
6.5.3.		Opening roof glazing
6.5.3.1.	L2e, L5e, L6e, L7e	Materials used: …
6.5.4.		Other glass panes
6.5.4.1.	L2e, L5e, L6e, L7e	Materials used: …
6.6.		Windscreen wiper(s)
6.6.1.	L2e, L5e, L6e, L7e	Detailed technical description (including photographs or drawings): …
6.7.		Windscreen washer
6.7.1.	L2e, L5e, L6e, L7e	Detailed technical description (including photographs or drawings): …
6.7.2.	L2e, L5e, L6e, L7e	Capacity of the reservoir: …l
6.8.		Defrosting and demisting
6.8.1.	L2e, L5e, L6e, L7e	Detailed technical description (including photographs or drawings): …
6.16.		Seating positions (saddles and seats)
6.16.1.	L1e — L7e	Number of seating positions: …
6.16.1.1.	L2e, L5e, L6e, L7e	Location and arrangement(8): …
6.16.4.	L2e, L4e, L5e-B, L6e-B, L7e	Coordinates or drawing of the R-point(s) of all seating positions: …
6.16.4.1.	L2e, L4e, L5e-B, L6e-B, L7e	Driver's seat: …
6.16.5.	L1e — L7e	Design torso angle: …
6.16.5.1.	L1e — L7e	Driver's seat: …
6.20.		Vehicle occupant protection, including interior fittings and vehicle doors
6.20.1.		Bodywork
6.20.1.1.	L2e, L5e-B, L6e-B, L7e	Materials used and methods of construction: …
6.20.2.		Occupant doors, latches and hinges
6.20.2.1.	L2e, L5e, L6e, L7e	Number of doors, and its configuration, dimensions and maximum angle of opening(5): …
6.20.3.		Interior protection for occupants)
6.20.3.1.	L2e, L5e, L6e, L7e	Photographs, drawings and/or an exploded view of the interior fittings, showing the parts in the passenger compartment and the materials used (with the exception of interior rear view mirrors, arrangement of controls, seats and the rear part of seats), roof and opening roof, backrest: …’;

(n) the following Appendix 9b is inserted:

‘Appendix 9b Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an identification of controls, te ll-tales and indicators system
Item No.	(Sub) categories	Detailed information
B.		General information concerning systems, components or separate technical units
0.7.	L1e — L7e	Make(s) (trade name(s) of manufacturer): …
0.8.	L1e — L7e	Type: …
0.8.1.	L1e — L7e	Commercial name(s) (if available): …
0.8.2.	L1e — L7e	Type-approval number(s) (if available): …
0.8.3.	L1e — L7e	Type-approval(s) issued on (date, if available): …
0.9.		Company name and address of manufacturer: …
0.9.1.	L1e — L7e	Name(s) and address(es) of assembly plants: …
0.9.2.	L1e — L7e	Name and address of manufacturer's authorised representative, if any: …
0.10.		Vehicle(s) for which the separate technical unit is intended for(21):
0.10.1.	L1e — L7e	Type(17): …
0.10.2.	L1e — L7e	Variant(17): …
0.10.3.	L1e — L7e	Version(17): …
0.10.4.	L1e — L7e	Commercial name(s) (if available): …
0.10.5.	L1e — L7e	Category, subcategory and sub-subcategory of vehicle(2): …
C.		General information concerning vehicle, systems, components or separate technical units
0.12.		Conformity of production
0.12.1.	L1e — L7e	Description of overall quality-assurance management systems.
1.		GENERAL CONSTRUCTION CHARACTERISTICS
1.7.	L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C	Hand of drive: left/right/centre(4): …
6.9.		Driver-operated controls including identification of controls, tell-tales and indicators
6.9.1.	L1e — L7e	Arrangement and identification of controls, tell-tales and indicators: …
6.9.2.	L1e — L7e	Photographs and/or drawings of the arrangement of symbols and controls, tell-tales and indicators: …
6.9.3.	L1e — L7e	Controls, tell-tales and indicators for which, when fitted, identification is mandatory, including the identification symbols to be used for that purpose:
6.9.4.	L1e — L7e	Summary table: the vehicle is equipped with the following driver-operated controls, including indicators and tell-tales(4) Controls, tell-tales and indicators for which, when fitted, identification is mandatory, and symbols to be used for that purpose Symbol No Device Control / indicator available (+) x yes - no or not separately available o optional. Identified by symbol Where (++) d directly on control, indicator or tell-tale c in close vicinity. Tell-tale available Identified by symbol Where 1 Master light 2 Dipped-beam head lamps 3 Main-beam head lamps 4 Position (side) lamps 5 Front fog lamps 6 Rear fog lamp 7 Headlamp levelling device 8 Parking lamps 9 Direction indicators 10 Hazard warning 11 Windscreen wiper 12 Windscreen washer 13 Windscreen wiper and washer 14 Headlamp cleaning device 15 Windscreen demisting and defrosting 16 Rear window demisting and defrosting 17 Ventilating fan 18 Diesel pre-heat 19 Choke 20 Brake failure 21 Fuel level 22 Battery charging condition 23 Engine coolant temperature 24 Malfunction indicator light (MI)
6.9.5.	L1e — L7e	Controls, tell-tales and indicators for which, when fitted, identification is optional, and symbols which shall be used if they are to be identified Symbol No Device Control / indicator available (+) x yes - no or not separately available o optional. Identified by symbol Where (++) d directly on control, indicator or tell-tale c in close vicinity.’; Tell-tale available Identified by symbol Where 1 Parking brake 2 Rear window wiper 3 Rear window washer 4 Rear window wiper and washer 5 Intermittent windscreen wiper 6 Audible warning device (horn) 7 Front hood (bonnet) 8 Rear hood (boot) 9 Seat belt 10 Engine oil pressure 11 Unleaded petrol 12 … 13 …

(o) the following Appendix 11a is inserted:

‘Appendix 11a Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a safety belt anchorages system
Item No.	(Sub) categories	Detailed information
B.		General information concerning systems, components or separate technical units
0.7.	L1e — L7e	Make(s) (trade name(s) of manufacturer): …
0.8.	L1e — L7e	Type: …
0.8.1.	L1e — L7e	Commercial name(s) (if available): …
0.8.2.	L1e — L7e	Type-approval number(s) (if available): …
0.8.3.	L1e — L7e	Type-approval(s) issued on (date, if available): …
0.9.		Company name and address of manufacturer: …
0.9.1.	L1e — L7e	Name(s) and address(es) of assembly plants: …
0.9.2.	L1e — L7e	Name and address of manufacturer's authorised representative, if any: …
0.10.		Vehicle(s) for which the separate technical unit is intended for(21):
0.10.1.	L1e — L7e	Type(17): …
0.10.2.	L1e — L7e	Variant(17): …
0.10.3.	L1e — L7e	Version(17): …
0.10.4.	L1e — L7e	Commercial name(s) (if available): …
0.10.5.	L1e — L7e	Category, subcategory and sub-subcategory of vehicle(2): …
C.		General information concerning vehicle, systems, components or separate technical units
0.12.		Conformity of production
0.12.1.	L1e — L7e	Description of overall quality-assurance management systems.
1.		GENERAL CONSTRUCTION CHARACTERISTICS
1.4.	L1e — L7e	Chassis (if any) (overall drawing): …
1.5.	L2e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C	Material used for the bodywork: …
1.7.	L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C	Hand of drive: left/right/centre(4): …
6.		INFORMATION ON FUNCTIONAL SAFETY
6.14.		Safety belts and/or other restraints
6.14.1.	L2e, L4e, L5e-B, L6e-B, L7e	Number and position of safety belts and restraint systems and seats on which they can be used, please fill out table below: (L = left side, R = right side, C = centre)
		Safety belt configuration and associated information Complete EU type-approval mark Variant, if applicable Belt adjustment device for height (indicate yes/no/optional) First row of seats L C R Second row of seats L C R L = left, C = centre, R = right
6.14.2.	L2e, L4e, L5e-B, L6e-B, L7e	Description of a specific type of belt, with one anchorage attached to the seat back-rest or incorporating an energy-dissipation device: …
6.14.3.	L2e, L4e, L5e-B, L6e-B, L7e	Number and location of the anchorages: …
6.14.4.	L2e, L4e, L5e-B, L6e-B, L7e	Brief description of electrical/electronic components: …
6.15.		Safety belt anchorages
6.15.1.	L2e, L4e, L5e-B, L6e-B, L7e	Photographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point: …
6.15.2.	L2e, L4e, L5e-B, L6e-B, L7e	Drawings of the anchorages and the parts of the vehicle structure to which they are attached (together with a statement on the nature of the materials used): …
6.15.3.	L2e, L4e, L5e-B, L6e-B, L7e	Designation of the types of belts(14) authorised for attachment to the anchorages on the vehicle: …
		Safety-belt anchorage configuration and associated information Anchorage location Vehicle structure Seat structure First row of seats Right-hand seat Lower anchorages Upper anchorages outboard inboard Centre seat Lower anchorages Upper anchorages right left Left-hand seat Lower anchorages Upper anchorages outboard inboard Second row of seats Right-hand seat Lower anchorages Upper anchorages outboard inboard Centre seat Lower anchorages Upper anchorages right left Left-hand seat Lower anchorages Upper anchorages outboard inboard
6.15.4.	L2e, L4e, L5e-B, L6e-B, L7e	Type-approval mark for each position: …
6.15.5.	L2e, L4e, L5e-B, L6e-B, L7e	Special devices (example: seat-height adjustment, preloading device, etc.): …
6.15.6.	L2e, L4e, L5e-B, L6e-B, L7e	Photographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point: …
6.15.7.	L2e, L4e, L5e-B, L6e-B, L7e	Observation: …’;

(p) the following Appendix 11b is inserted:

‘Appendix 11b Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a steer-ability, cornering properties and turn ability system
Item No.	(Sub) categories	Detailed information
B.		General information concerning systems, components or separate technical units
0.7.	L1e — L7e	Make(s) (trade name(s) of manufacturer): …
0.8.	L1e — L7e	Type: …
0.8.1.	L1e — L7e	Commercial name(s) (if available): …
0.8.2.	L1e — L7e	Type-approval number(s) (if available): …
0.8.3.	L1e — L7e	Type-approval(s) issued on (date, if available): …
0.9.		Company name and address of manufacturer: …
0.9.1.	L1e — L7e	Name(s) and address(es) of assembly plants: …
0.9.2.	L1e — L7e	Name and address of manufacturer's authorised representative, if any: …
0.10.		Vehicle(s) for which the separate technical unit is intended for(21):
0.10.1.	L1e — L7e	Type(17): …
0.10.2.	L1e — L7e	Variant(17): …
0.10.3.	L1e — L7e	Version(17): …
0.10.4.	L1e — L7e	Commercial name(s) (if available): …
0.10.5.	L1e — L7e	Category, subcategory and sub-subcategory of vehicle(2): …
C.		General information concerning vehicle, systems, components or separate technical units
0.12.		Conformity of production
0.12.1.	L1e — L7e	Description of overall quality-assurance management systems.
1.		GENERAL CONSTRUCTION CHARACTERISTICS
1.1.	L1e — L7e	Photographs and/or drawings of a representative vehicle: …
1.3.	L1e — L7e	Number of axles and wheels: …
1.3.1.	L1e — L7e	Axles with twinned wheels(23): …
1.3.2.	L1e — L7e	Powered axles(23): …
1.7.	L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C	Hand of drive: left/right/centre(4): …
1.8.		Propulsion unit performance
1.8.1.	L3e, L4e, L5e, L7e-A, L7e-B2	Declared maximum vehicle speed: …km/h
1.8.2.	L1e, L2e, L6e, L7e-B1, L7e-C	Maximum design vehicle speed(22): …km/h and gear in which it is reached: …
2.		MASSES AND DIMENSIONS (in kg and mm.) refer to drawings where applicable
2.1		Range of vehicle mass (overall)
2.1.3.	L1e — L7e	Technically permissible maximum laden mass: …kg
2.1.3.1.	L1e — L7e	Technically permissible maximum mass on front axle: …kg
2.1.3.2.	L1e — L7e	Technically permissible maximum mass on rear axle: …kg
2.1.3.3.	L4e	Technically permissible maximum mass on sidecar axle: …kg
2.2.		Range of vehicle dimensions (overall)
2.2.1.	L1e — L7e	Length: …mm
2.2.2.	L1e — L7e	Width: …mm
2.2.3.	L1e — L7e	Height: …mm
2.2.4.	L1e — L7e	Wheelbase: …mm
2.2.4.1.	L4e	Wheelbase sidecar(28): …mm
2.2.5.		Track width
2.2.5.1.	L1e — L7e if equipped with twinned wheels L2e, L4e, L5e, L6e, L7e	Track width front: …mm.
2.2.5.2.	L1e — L7e if equipped with twinned wheels	Track width rear: …mm.
2.2.5.3.	L2e, L4e, L5e, L6e, L7e	Track width sidecar: …mm.
2.2.6.	L7e-B	Front overhang: …mm.
2.2.7.	L7e-B	Rear overhang: …mm.
3.		GENERAL POWERTRAIN CHARACTERISTICS
3.5.		Drive-train and control(13)
3.5.1.	L1e — L7e	Brief description and schematic drawing of the vehicle drive-train and its control system (gear shift control, clutch control or any other element of drive-train): …
3.6.		Safe-cornering device
3.6.1.	L1e — L7e equipped with twinned wheels, L2e, L5e, L6e, L7e	Safe-cornering device (Annex VIII to Regulation (EU) No 168/2013: yes/no(4); differential/other(4)
3.6.2.	L1e — L7e equipped with twinned wheels, L2e, L5e, L6e, L7e	Differential lock: yes/no/optional(4)
3.6.3.	L1e — L7e	Brief description and schematic drawing of the safe-cornering device, the differential lock and their control systems: …
3.7.		Suspension and control
3.7.1.	L1e — L7e	Brief description and schematic drawing of suspension and its control system: …
6.		INFORMATION ON FUNCTIONAL SAFETY
6.17.		Steer-ability, cornering properties and turn-ability
6.17.1.	L1e — L7e	Schematic diagram of steered axle(s) showing steering geometry: …
6.17.2.		Transmission and control of steering
6.17.2.1.	L1e — L7e	Configuration of steering transmission (specify for front and rear): …
6.17.2.2.	L1e — L7e	Linkage to wheels (including other than mechanical means; specify for front and rear): …
6.17.2.2.1.	L1e — L7e	A brief description of the electrical/electronic components: …
6.17.2.3.	L1e — L7e	Diagram of the steering transmission: …
6.17.2.4.	L2e, L5e, L6e, L7e	Schematic diagram(s) of the steering control(s): …
6.17.2.5.	L2e, L5e, L6e, L7e	Range and method of adjustment of the steering control(s): …
6.17.2.6.	L2e, L5e, L6e, L7e	Method of assistance: …
6.17.3.		Maximum steering angle of the wheels
6.17.3.1.	L1e — L7e	To the right: …degrees; number of turns of the steering wheel (or equivalent data): …
6.17.3.2.	L1e — L7e	To the left: …degrees; number of turns of the steering wheel (or equivalent data): …
6.18.		Tyres/wheels combination
6.18.1.		Tyres:
6.18.1.1.		Size designation
6.18.1.1.1.	L1e — L7e	Axle 1: …
6.18.1.1.2.	L1e — L7e	Axle 2: …
6.18.1.1.3.	L4e	Sidecar wheel: …
6.18.1.4.	L1e — L7e	Tyre pressure(s) as recommended by the vehicle manufacturer: …kPa’;

(q) the following Appendix 13a is inserted:

‘Appendix 13a Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a vehicle occupant protection, including interior fittings, head restraint and vehicle doors system
Item No.	(Sub) categories	Detailed information
B.		General information concerning systems, components or separate technical units
0.7.	L1e — L7e	Make(s) (trade name(s) of manufacturer): …
0.8.	L1e — L7e	Type: …
0.8.1.	L1e — L7e	Commercial name(s) (if available): …
0.8.2.	L1e — L7e	Type-approval number(s) (if available): …
0.8.3.	L1e — L7e	Type-approval(s) issued on (date, if available): …
0.9.		Company name and address of manufacturer: …
0.9.1.	L1e — L7e	Name(s) and address(es) of assembly plants: …
0.9.2.	L1e — L7e	Name and address of manufacturer's authorised representative, if any: …
0.10.		Vehicle(s) for which the separate technical unit is intended for(21):
0.10.1.	L1e — L7e	Type(17): …
0.10.2.	L1e — L7e	Variant(17): …
0.10.3.	L1e — L7e	Version(17): …
0.10.4.	L1e — L7e	Commercial name(s) (if available): …
0.10.5.	L1e — L7e	Category, subcategory and sub-subcategory of vehicle(2): …
C.		General information concerning vehicle, systems, components or separate technical units
0.12.		Conformity of production
0.12.1.	L1e — L7e	Description of overall quality-assurance management systems.
1.		GENERAL CONSTRUCTION CHARACTERISTICS
1.7.	L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-C	Hand of drive: left/right/centre(4): …
6.		INFORMATION ON FUNCTIONAL SAFETY
6.16.		Seating positions (saddles and seats)
6.16.1.	L1e — L7e	Number of seating positions: …
6.16.1.1.	L2e, L5e, L6e, L7e	Location and arrangement(8): …
6.16.2.	L1e — L7e	Seating position configuration: seat/saddle(4)
6.16.3.	L1e — L7e	Description and drawings of:
6.16.3.1.	L1e — L7e	The seats and their anchorages: …
6.16.3.2.	L1e — L7e	The adjustment system: …
6.16.3.3.	L1e — L7e	The displacement and locking systems: …
6.16.3.4.	L1e — L7e	The seat-belt anchorages incorporated in the seat structure: …
6.16.3.5.	L1e — L7e	The parts of the vehicle used as anchorages: …
6.16.4.	L2e, L4e, L5e-B, L6e-B, L7e	Coordinates or drawing of the R-point(s) of all seating positions: …
6.16.4.1.	L2e, L4e, L5e-B, L6e-B, L7e	Driver's seat: …
6.16.4.2.	L2e, L4e, L5e-B, L6e-B, L7e	All other seating positions: …
6.16.5.	L1e — L7e	Design torso angle: …
6.16.5.1.	L1e — L7e	Driver's seat: …
6.16.5.2.	L1e — L7e	All other seating positions: …
6.20.		Vehicle occupant protection, including interior fittings and vehicle doors
6.20.1.		Bodywork
6.20.1.1.	L2e, L5e-B, L6e-B, L7e	Materials used and methods of construction:
6.20.2.		Occupant doors, latches and hinges
6.20.2.1.	L2e, L5e, L6e, L7e	Number of doors, and its configuration, dimensions and maximum angle of opening(5): …
6.20.2.2.	L2e, L5e, L6e, L7e	Drawing of latches and hinges and of their position in the doors: …
6.20.2.3.	L2e, L5e, L6e, L7e	Technical description of latches and hinges: …
6.20.2.4.	L2e, L5e, L6e, L7e	Details, including dimensions, of entrances, steps and necessary handles where applicable: …
6.20.3.		Interior protection for occupants)
6.20.3.1.	L2e, L5e, L6e, L7e	Photographs, drawings and/or an exploded view of the interior fittings, showing the parts in the passenger compartment and the materials used (with the exception of interior rear view mirrors, arrangement of controls, seats and the rear part of seats), roof and opening roof, backrest: …
6.20.4.		Head restraints
6.20.4.1.	L2e, L5e, L6e, L7e	Head restraints: integrated/detachable/separate(4)
6.20.4.2.	L2e, L5e, L6e, L7e	Detailed description of the head restraint, specifying in particular the nature of the padding material or materials and, where applicable, the position and specifications of the braces and anchorage pieces for the type of seat for which approval is sought: …
6.20.4.3.	L2e, L5e, L6e, L7e	In the case of a ‘separate’ head restraint
6.20.4.3.1.	L2e, L5e, L6e, L7e	Detailed description of the structural zone to which the head restraint is intended to be fixed: …
6.20.4.3.2.	L2e, L5e, L6e, L7e	Scale drawings of the significant parts of the structure and the head restraint: …’;

(r) the following Appendix 20a is inserted:

‘Appendix 20a Model information document relating to EU type-approval of a fuel tank as a STU
Item No.	(Sub) categories	Detailed information
B.		General information concerning systems, components or separate technical units
0.7.	L1e — L7e	Make(s) (trade name(s) of manufacturer): …
0.8.	L1e — L7e	Type: …
0.8.1.	L1e — L7e	Commercial name(s) (if available): …
0.8.2.	L1e — L7e	Type-approval number(s) (if available): …
0.8.3.	L1e — L7e	Type-approval(s) issued on (date, if available): …
0.9.		Company name and address of manufacturer: …
0.9.1.	L1e — L7e	Name(s) and address(es) of assembly plants: …
0.9.2.	L1e — L7e	Name and address of manufacturer's authorised representative, if any: …
0.10.		Vehicle(s) for which the separate technical unit is intended for(21):
0.10.1.	L1e — L7e	Type(17): …
0.10.2.	L1e — L7e	Variant(17): …
0.10.3.	L1e — L7e	Version(17): …
0.10.4.	L1e — L7e	Commercial name(s) (if available): …
0.10.5.	L1e — L7e	Category, subcategory and sub-subcategory of vehicle(2): …
C.		General information concerning vehicle, systems, components or separate technical units
0.12.		Conformity of production
0.12.1.	L1e — L7e	Description of overall quality-assurance management systems.
4.		GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE
4.3.		Evaporative emission control system
4.3.7.	L1e — L7e	Schematic drawing of the fuel tank, indicating capacity and material:
7.		INFORMATION ON VEHICLE CONSTRUCTION
7.5.		Fuel storage
7.5.1.1.		Fuel tank
7.5.1.1.1.	L1e — L7e	Maximum capacity: …
7.5.1.1.2.	L1e — L7e	Materials used: …
7.5.1.1.3.	L1e — L7e	Fuel tank inlet: restricted orifice/label(4)…
7.5.1.3.	L1e — L7e	Drawing and technical description of the tank with connections and lines of the breathing and venting system, locks, valves, fastening devices: …
7.5.2.		Compressed natural gas (CNG) container
7.5.2.1.	L1e — L7e	Applicable information document set out in UNECE regulation No 110 OJ L 120, 7.5.2011, p. 1. as prescribed for vehicle category M1 shall supplement this information document with regards to the CNG container and related equipment.
7.5.3.	L1e — L7e	Liquefied petroleum gas (LPG)container(s)
7.5.3.1.	L1e — L7e	Applicable information document set out in UNECE regulation No 67 OJ L 72, 14.3.2008, p. 1.’ as prescribed for vehicle category M1 shall supplement this information document with regards to the LPG container and related equipment.

(s) Appendix 24 is replaced by the following:

‘Appendix 24 Manufacturer's declaration for vehicles capable of converting their performance level from subcategory (L3e/L4e)-A2 to (L3e/L4e)-A3 and vice versa
Manufacturer's declaration of conversion of (L3e/L4e)-A2 to (L3e/L4e)-A3 motorcycle characteristics and vice-versa
A duly-completed version of this statement shall be included in the information folder.
The undersigned: […(full name and position)]
0.4. Company name and address of manufacturer: …
0.4.2. Name and address of the manufacturer's representative (if any)(0): …
Declares that
The (L3e/L4e)-A2 or (L3e/L4e)-A3(1) motorcycle:
0.2. Type(4): …
0.2.1. Variant(s)(4): …
0.2.2. Version(s)(4): …
0.2.3 Commercial name(s) (if available): …
0.3. Category, subcategory and sub-subcategory of vehicle(5): …
1. Type-approval number (if available): …
1.1. Type-approval issued on (date, if available): …
3.2.2.1. PCUs/ECUs(1) software identification number(s): …and calibration verification number(s): …
is technically suitable to be retrofitted to the (L3e/L4e)-A2 or (L3e/L4e)-A3(1) vehicle identified below:
0.2. Type(4): …
0.2.1. Variant(s)(4): …
0.2.2. Version(s)(4): …
0.2.3 Commercial name(s) (if available): …
0.3. Category, subcategory and sub-subcategory of vehicle(5): …
1. Type-approval number (if available): …
1.1. Type-approval issued on (date, if available): …
3.2.2.1. PCUs/ECUs(1) software identification number(s): …and calibration verification number(s): …
With the following technical characteristics:

General construction characteristics(3)
1.8. Maximum design vehicle speed: …km/h
1.9. Maximum net power: …kW (at …min-1)(1)
1.10. Ratio maximum net power/mass of the vehicle in running order: …kW/kg

Environmental performance(3)
4.0.6. Sound level measured according to(2): …
4.0.6.1. Stationary: …dB(A) at engine speed: …min-1
4.0.6.2. Drive-by: …dB(A)
4.0.6.3. Limit value for Lurban (0)(7): …dB(A)
3.2.15. Exhaust emissions measured according to(2): …
3.2.15.1. Type I test: tailpipe emissions after cold start, including the deterioration factor:
CO: …mg/km
THC: …mg/km
NMHC(0): …mg/km
NOx: …mg/km
THC+NOx(0): …mg/km
PM(0): …mg/km
8.7.3.2. Type II test: tailpipe emissions at (increased) idle and free acceleration:
HC: …ppm at normal idling speed and: …ppm at high idle speed
CO: …% vol. at normal idling speed and: …% vol. at high idle speed
8.7.3.2.1. Smoke corrected absorption coefficient: …m–1

Energy efficiency measured according to(2)(3):
4.0.2. Fuel consumption(0)(6): …l or kg/100 km
4.0.3. CO2 emissions(0)(6): …g/km
4.0.4. Energy consumption(0)(6): …Wh/km
4.0.5. Electric range(0): …km
by modifying the following components, parts, software, etc.: …
…
Place: …
Date: …
Signature: …
Name and position in the company: …

Explanatory notes relating to Appendix 24
(Footnotes and explanations not to be stated on the Manufacturer's declaration)
(0) Suppress the entry if not applicable.
(1) Delete where not applicable (no deletion required when more than one entry is applicable).
(2) Number of the Commission Delegated Regulation and latest amending Commission Delegated Regulation applicable to the type-approval. In the case of a Commission Delegated Regulation with two or more implementation stages; indicate also the implementation stage and/or code. Alternatively indicate the number of the applicable UNECE Regulation.
(3) Round the units of measure to the nearest whole number for dB(A), Wh/ km, mg/ km, g/km, ppm and km; to the nearest tenth for kW, l/ 100 km, kg/ 100 km, m3/ 100 km and for % vol; and to the nearest hundredth for kW/ kg and for m–1.
(4) Indicate the alphanumeric code Type-Variant-Version or ‘TVV’ allocated to each type, variant and version as set out in point 2.3 of Part B of Annex I.
(5) Classified according to Article 4 of and Annex I to Regulation (EU) No 168/2013, the coding shall be indicated, e.g. ‘L3e-A2’ for a medium-performance motorcycle.
(6) For externally chargeable hybrid electric vehicles, the “weighted, combined” values for CO2, fuel consumption and electric energy consumption shall be indicated.
(7) Only applicable for vehicle category L3e.’

(t) the explanatory notes relating to Annex I are amended as follows:
(i) explanatory note (16) is replaced by the following:

‘(16) Rounded to the nearest whole number for dB(A).’;

(ii) explanatory note (24) is replaced by the following:

‘(24) For vehicles equipped with CVT indicate the following: 1 “gear ratio at maximum design vehicle speed”; 2 “gear ratio at maximum peak power”; 3 “gear ration at maximum peak torque”. The gear ratios shall include the gear ratio of the primary transmission ratio (if applicable) and be supplemented with an acceptable tolerance band to the satisfaction of the approval authority. For wheel hub engines without gear drive, indicate “n/a” or “1”.’.

(2) Annex IV is amended as follows:
(a) Appendix 1 is amended as follows:
(i) in MODEL A — Section 1, the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) issued on ( …date of issue) and’ are replaced by the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) (CV*… type-approval number including extension number)(3i) issued on ( …date of issue) (CV* …date of issue)(3i) and’;
(ii) in MODEL B — Section 1, the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) issued on ( …date of issue) and’ are replaced by the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) (CV*… type-approval number including extension number)(3i) issued on ( …date of issue) (CV* …date of issue)(3i) and’;
(iii) in MODEL C — Section 1, the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) issued on ( …date of issue) and’ are replaced by the words ‘conforms in all respects to the type described in EU type-approval (… type-approval number including extension number) (CV*… type-approval number including extension number)(3i) issued on ( …date of issue) (CV* …date of issue)(3i) and’;
(iv) in Section 2, the heading ‘Section 2’ is replaced by the following:

‘SECTION 2(O)’;

(v) in Section 2, entry 4.0.1. is replaced by the following:

‘4.0.1.	Environmental step: Euro …(3/4/5) (1)’

(vi) in Section 2, entries 4.0.2., 4.0.2.1. and 4.0.2.2. are deleted;
(vii) in Section 2, the following entries 4.0.6. to 4.0.6.3. are inserted after entry 4.0.1.:

‘4.0.6.	Sound level measured according to(m):
4.0.6.1.	Stationary: …dB(A) (CV*: …dB(A))(3i) at engine speed: …min-1 (CV*: …min-1)(3i)
4.0.6.2.	Drive-by: …dB(A) (CV*: …dB(A))(3i)
4.0.6.3.	Limit value for Lurban(3r): …dB(A) (CV*: …dB(A))(3i)’;

(viii) in Section 2, entry 3.2.15.1. is replaced by the following:

‘3.2.15.1.	Type I test: tailpipe emissions after cold start, including the deterioration factor, if applicable:		
	CO:	mg/km	(CV*:… mg/km)(3i)
	THC:	mg/km	(CV*:… mg/km)(3i)
	NMHC:	mg/km (3)	(CV*:… mg/km)(3i)
	NOx:	mg/km	(CV*:… mg/km)(3i)
	THC+NOx:	mg/km(3)	(CV*:… mg/km)(3i)
	PM:	mg/km(3)	(CV*:… mg/km)(3i)’

(ix) in Section 2, the heading ‘Energy efficiency’, including all its entries, is replaced by the following:

‘Energy efficiency(m)(o):
4.0.2.	Fuel consumption(3)(q):	l or kg/100 km	(CV*:… l or kg/100 km)(3)(q)(3i)
4.0.3.	CO2 emissions(3)(q)(n):	g/km	(CV*:… g/km)(3)(q)(3i)
4.0.4.	Energy consumption(3)(q):	Wh/km	(CV*:… Wh/km)(3)(q)(3i)
4.0.5.	Electric range(3):	km	(CV*:… km)(3)(3i)’

(b) Appendix 2 is amended as follows:
(i) entry 0.3. is replaced by the following:

‘0.3.	Category, subcategory and sub-subcategory of vehicle(6)(u):…’

(ii) the heading ‘Energy efficiency’, including all its entries, is replaced by the following:

‘Energy efficiency:
4.0.2.	Fuel consumption(3)(q):	l or kg/100 km	(CV*:… l or kg/100 km)(3)(q)(3i)
4.0.3.	CO2 emissions(3)(q)(n):	g/km	(CV*:… g/km)(3)(q)(3i)
4.0.4.	Energy consumption(3)(q):	Wh/km	(CV*:… Wh/km)(3)(q)(3i)
4.0.5.	Electric range(3):	km	(CV*:… km)(3)(3i)’

(c) the explanatory notes relating to Annex IV are amended as follows:
(i) explanatory note (9) is replaced by the following:

‘(9) Indicate the following value according to the category of the vehicle:
for (sub) categories: L1e, L2e, L6e, L7e-B1, L7e-C: the measured maximum speed of the vehicle;
for (sub) categories L3e, L4e, L5e, L7e-A and L7e-B2: the maximum design vehicle speed.
for cycles designed to pedal (L1e): suppress this entry of the certificate of conformity’;

(ii) explanatory note (n) is deleted;
(iii) explanatory note (o) is replaced by the following:

‘(o) Round the values to the nearest whole number for dB(A), Wh/ km, mg/ km, g/km, ppm, mm, kg, km and km/ h; to the nearest tenth for kW, l/ 100 km, kg/ 100 km, m3/ 100 km and for % vol; and to the nearest hundredth for kW/ kg and for m-1.’;

(iv) explanatory note (p) is deleted;
(v) the second explanatory note (s) below explanatory note (t) is deleted;
(vi) the following explanatory note (u) is inserted:

‘(u) The information contained in this entry shall be stated in entry No 04. “Vehicle category” of the certificates of conformity issued in accordance with the template set out in Annex IV to Directive 2002/24/EC.’;

(vii) the following explanatory note (3r) is inserted:

‘(3r) Only applicable for vehicle category L3e’.

(3) Annex V is amended as follows:
(a) point 3.1.6. is replaced by the following:

‘3.1.6. The existence of measures taken by the manufacturer to ensure the traceability of the vehicle referred to in point 3.1.5. needs not be checked at the time of the type-approval.’;

(b) point 3.2.8. is replaced by the following:

‘3.2.8. The vehicle identification number shall, if possible, be presented on a single line. When the VIN is marked on two lines, the beginning and the end of the VIN shall be limited by one symbol at the choice of the manufacturer which should neither be a Roman capital letter nor an Arabic numeral.’

(c) in Appendix 1, point 5 is replaced by the following:

‘5. Example for a L3e-A3 motorcycle with additional information for the converted vehicle (CV), a L3e-A2 motorcycle, outside the clearly marked rectangle. In this case for the purpose of a temporary and reversible manufacturer's authorised modification to the first registered L3e-A3 motorcycle in order to register it nationally after its conversion as a reduced-power L3e-A2 configuration (e.g. for vehicle operators with A2 driving licence):
MOTORUDOLPH
L3e-A3
e4*168/2013*2691
JRM00DBP008002211
84 dB(A) — 4 250 min-1
max 352 kg
L3e-A2
e4*168/2013*2692
83 dB(A) — 3 750 min-1
35 kW’.

(4) Annex VI is amended as follows:
(a) in Appendix 1, in Section III, entry 2.1. is replaced by the following:

‘2.1.	The approval is granted in accordance with Article 40 of Regulation (EU) No 168/2013 and the validity of the approval is thus limited to dd/mm/yyyy(6).’

(b) Appendix 2 is amended as follows:
(i) in Section III, entry 4.1. is replaced by the following:

‘4.1.	The approval is granted in accordance with Article 40 of Regulation (EU) No 168/2013 and the validity of the approval is thus limited to dd/mm/yyyy(6).’

(ii) in Section III, the first indent under ‘NB:’ is replaced by the following:

‘— If this model is used for type-approval of a vehicle as an exemption for new technology or new concept, pursuant to Article 40 of Regulation (EU) No 168/2013, the heading of the certificate shall read ‘EU WHOLE-VEHICLE PROVISIONAL TYPE-APPROVAL CERTIFICATE VALID ONLY ON THE TERRITORY OF …(5)’. The provisional type-approval certificate shall also specify the restrictions that have been imposed as to its validity and the waivers which have been applied in accordance with Article 30(4) of Regulation (EU) No 168/2013.’

(iii) the explanatory notes related to Appendix 2 are replaced by the following:

‘Explanatory notes relating to Appendix 2
(Footnotes and explanations not to be stated on the type-approval certificate)
(1) Delete where not applicable.
(2) Indicate the alphanumeric code Type-Variant-Version or ‘TVV’ allocated to each type, variant and version as set out in point 2.3 of Part B of Annex I.
(3) Classified according to Article 4 of and Annex I to Regulation (EU) No 168/2013, the coding shall be indicated, e.g. ‘L3e-A1E’ for a low-performance Enduro motor-cycle.
(4) See section 2.
(5) Indicate the Member State.
(6) Applicable only for type-approval of a vehicle as an exemption for new technology or new concept, pursuant to Article 40 of Regulation (EU) No 168/2013.
(7) Applicable only for vehicle type-approval for a national small series, pursuant to Article 42 of Regulation (EU) No 168/2013.
(8) Indicate only the latest amendment in case of an amendment of one or more Articles of Regulation (EU) 168/2013, according to the amendment applied for the EU type-approval.’;

(c) in Appendix 4, in Section II, the following entries 4a. and 4a.1. are inserted before entry 5.:

‘4a.	The approval is granted/extended/refused/withdrawn(1)
4a.1.	The approval is granted in accordance with Article 40 of Regulation (EU) No 168/2013 and its validity is thus limited to dd/mm/yyyy(5).’

(d) Section II of Appendix 5 is amended as follows:
(i) the following entries 4a. and 4a.1. are inserted before entry 5.:

‘4a.	The approval is granted/extended/refused/withdrawn(1)
4a.1.	The approval is granted in accordance with Article 40 of Regulation (EU) No 168/2013 and its validity is thus limited to dd/mm/yyyy(5).’

(ii) entry 5. is replaced by the following:

‘5.	Restrictions of validity(1)(5): …’

(iii) entry 6. is replaced by the following:

‘6.	Waivers applied(1)(5): …’

(5) Annex VII is amended as follows:
(a) in point 4., table 1 is deleted;
(b) point 5. is replaced by the following:

‘5. Codification for the numbering system of EU type-approval certificates of systems, components and separate technical units

Table 1
Codification for the numbering system of EU type-approval certificates of systems, components and separate technical units
LIST I — Environmental and propulsion unit performance requirements		
System or component/separate technical unit (STU)	Commission Delegated Regulation (EU) No	alphanumerical character
System: engine emissions (Euro 4 stage)	134/2014	A1
System: engine emissions (Euro 5 stage)	134/2014	A2
System: crankcase (point 1.3.1. and 1.3.2.) and evaporative emissions (point 1.4.1. to 1.4.3 of Annex IV to Regulation (EU) 168/2013)	134/2014	B1
System: crankcase (point 1.3.1. and 1.3.2.) and evaporative emissions (point 1.4.4. to 1.4.6 of Annex IV to Regulation (EU) 168/2013)	134/2014	B2
System: crankcase (point 1.3.1. and 1.3.2.) and evaporative emissions (point 1.4.7. to 1.4.8 of Annex IV to Regulation (EU) 168/2013)	134/2014	B3
System: environmental on-board diagnostic (OBD Stage I: point 1.8.1. to 1.8.2 of Annex IV to Regulation (EU) 168/2013)	134/2014	C1
System: environmental on-board diagnostic (OBD Stage II: point 1.8.3. of Annex IV to Regulation (EU) 168/2013)	134/2014	C2
System: sound level	134/2014	D
System: propulsion unit performance	134/2014	E
System: maximum torque and a maximum net power of a propulsion unit	134/2014	E1
STU: pollution-control device	134/2014	F
STU: noise-abatement device	134/2014	G
STU: exhaust device (pollution-control device and noise-abatement device)	134/2014	H
LIST II — Vehicle functional safety requirements		
System or component/separate technical unit (STU)	Commission Delegated Regulation (EU) No	alphanumerical character
System: braking	3/2014	J
System: installation of lighting and light-signalling devices	3/2014	K
System: roll-over protective structure (ROPS)	3/2014	L
System: installation of tyres	3/2014	M
System: installation of audible warning devices	3/2014	AA
System: installation of glazing, windscreen wipers and defrosting and demisting devices	3/2014	AB
System: identification of controls, tell-tales and indicators	3/2014	AC
System: safety belt anchorages	3/2014	AD
System: steer-ability, cornering properties and turn ability	3/2014	AE
System: vehicle occupant protection, including interior fittings, head restraint and vehicle doors	3/2014	AF
Component/STU: audible warning device	3/2014	N
Component/STU: non-glazing front windscreen	3/2014	O
Component/STU: windscreen washer device	3/2014	P
Component/STU: rearward visibility device	3/2014	Q
Component/STU: safety belts	3/2014	R
Component/STU: seating position (saddle/seat)	3/2014	S
LIST III — Vehicle construction and general type-approval requirements		
System or component/separate technical unit (STU)	Commission Delegated Regulation (EU) No	alphanumerical character
System: functional on-board diagnostics (OBD Stage I: point 1.8.1. to 1.8.2 of Annex IV to Regulation (EU) 168/2013)	44/2014	T1
System: functional on-board diagnostics (OBD Stage II: point 1.8.3. of Annex IV to Regulation (EU) 168/2013)	44/2014	T2
STU: trailer coupling device	44/2014	U
STU: devices to prevent unauthorised use	44/2014	V
STU: passenger handholds	44/2014	W
STU: footrests	44/2014	X
STU: side-car	44/2014	Y
STU: fuel tank	44/2014	Z’

(6) Annex VIII is amended as follows:
(a) item 2.2.1.3.3. is replaced by the following:

‘2.2.1.3.3. Type II test results(3):

Table 5-2
Test type II results
Test	HC (ppm)	CO(% vol.)	Lambda	Engine speed (min-)	Engine oil temperature (K)	Measured & corrected value of absorption coefficient(m-1)
PI: Low idle test						—
PI: High idle test						—
CI — Free acceleration test / Smoke opacity test results	—	—	—	—	—	’

(b) items 2.2.1.8.6. and 2.2.1.8.7. are replaced by the following:

‘2.2.1.8.6. CO2 emissions and fuel consumption(3)

Table 5-8
Test Type VII result table for propulsions equipped with a combustion engine only or equipped with not-externally-chargeable (NOVC) hybrid electric propulsion
Test Type VII Test Results (TRTTVII)	Test No	CO2(g/km)	Fuel consumption(l/100km) or (kg/100 km)
TRTTI Measured x Where applicable. Round to 2 decimal places.	1		
	2		
	3		
TRTTI Measured Mean			
Ki Round to 4 decimal places. Set Ki = 1 in case: (a) the vehicle is not equipped with a periodically regenerating emission abatement system or; (b) the vehicle is not a hybrid electric vehicle. (no unit )			
TRTTVIIx Round to 0 decimal places = Ki · TRTTI Measured x Mean			
CO2 and Fuel consumption as declared by the manufacturer	—		

2.2.1.8.7. CO2 emissions/fuel consumption (manufacturer's declared values)(3)
Electric energy consumption and electric range(3):

Table 5-9
Test Type VII result table for pure electric propulsion or not-externally-chargeable (NOVC) propulsions equipped with an electric motor for propulsion
	Measured electric energy consumption(Wh/km)	Declared electric energy consumption(Wh/km)	Measured electric range(km)	Declared electric range(km)
Pure electric powertrain				
NOVC hybrid electric powertrain				’;

(c) in point 2.2.1.10.9., Table 5-13 is replaced by the following:

‘Table 5-13
Test result requirements regarding sound level
Sound emission level	Euro 4		Euro 5	
Sound level limits	Annex VI(D) to Regulation (EU) No 168/2013	Equivalent UNECE sound level limits to Annex VI(D) to Regulation (EU) No 168/2013	Annex VI(D) to Regulation (EU) No 168/2013	
Test requirements	Annex VIII to Regulation (EU) No 168/2013	UNECE Regulations referred to in Annex VI(D) to Regulation (EU) No 168/2013	UNECE Regulations referred to in Annex VI(D) to Regulation (EU) No 168/2013	
Administrative requirements for vehicle subcategories regarding sound level:				
Vehicle (sub)categories				
L1e, L6e-A	Annex I to UNECE Regulation No 63			UNECE Regulation No 63
L3e	Annex I to UNECE Regulation No 41			UNECE Regulation No 41
L2e, L4e, L5e, L6e-B, L7e	Annex I to UNECE Regulation No 9			UNECE Regulation No 9
Replacement exhaust noise-abatement devices all categories	Annex I to UNECE Regulation No 92			UNECE Regulation No 92’

(d) in point 2.2.1.10.11., Table 5-14 is replaced by the following:

‘Table 5-14
Sound level test results Euro 4 or Euro 5
Vehicle category	Propulsion class	Euro 4 sound level limitSLEU4 (dB(A)) / Euro 4 test results TRTTIXEU4 (dB(A))& (% of SLEU4)	Euro 4 sound test procedure	Euro 5 sound level limitSLEU5 (dB(A)) / Euro 5 test results TRTTIXEU5 (dB(A)) & (% of SLEU5)	Euro 5 sound test procedure
L1e-A	PI / CI / Hybrid	SLEU4:63	Commission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 63	SLEU5:	UNECE Regulation No 63
		TRTTIXEU4:		TRTTIXEU5:	
L1e-B	PI / CI / Hybrid vmax ≤ 25 km/h	SLEU4:66		SLEU5:	
		TRTTIXEU4:		TRTTIXEU5:	
	PI / CI / Hybrid vmax ≤ 45 km/h	SLEU4:71		SLEU5:	
		TRTTIXEU4:		TRTTIXEU5:	
L2e	PI / CI / Hybrid	SLEU4:76	Commission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 9	SLEU5:	UNECE Regulation No 9
		STREU4:		STREU5:	
L3e	PI / CI / Hybrid PMR ≤ 25	SLEU4:73	UNECE Regulation No 41	SLEU5:	UNECE Regulation No 41
		TRTTIXEU4:		TRTTIXEU5:	
	PI / CI / Hybrid 25 < PMR ≤ 50	SLEU4:74		SLEU5:	
		STREU4:		STREU5:	
	PI / CI / Hybrid PMR > 50	SLEU4:77		SLEU5:	
		TRTTIXEU4:		TRTTIXEU5:	
L4e	PI / CI / Hybrid	SLEU4:80	Commission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 9	SLEU5:	UNECE Regulation No 9
		TRTTIXEU4		TRTTIXEU5:	
L5e-A	PI / CI / Hybrid	SLEU4:80	Commission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 9	SLEU5:	UNECE Regulation No 9
		STREU4:		STREU5:	
L5e-B	PI / CI / Hybrid	SLEU4:80		SLEU5:	
		STREU4:		STREU5:	
L6e-A	PI / CI / Hybrid	SLEU4:80	Commission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 63	SLEU5:	UNECE Regulation No 63
		TRTTIXEU4:		TRTTIXEU5:	
L6e-B	PI / CI / Hybrid	SLEU4:80	Commission Delegated Regulation (EU) No 134/2014 Annex VIII / UNECE Regulation No 9	SLEU5:	UNECE Regulation No 9
		TRTTIXEU4:		TRTTIXEU5:	
L7e-A	PI / CI / Hybrid	SLEU4:80		SLEU5:	
		TRTTIXEU4:		TRTTIXEU5:	
L7e-B	PI / CI / Hybrid	SLEU4:80		SLEU5:	
		TRTTIXEU4:		TRTTIXEU5:	
L7e-C	PI / CI / Hybrid	SLEU4:80		SLEU5:	
		TRTTIXEU4		TRTTIXEU5:	’

(e) items 2.2.1.10.12.and 2.2.1.10.13. are replaced by the following:

‘2.2.1.10.12.	Stationary sound level: …dB(A) at engine speed: …min-1
2.2.1.10.13.	Replacement noise-abatement device(s) make(s) and type(s) (3): …’;

(f) the following item 2.2.1.10.14. is inserted:

‘2.2.1.10.14.	Location of the type-approval number (add drawings, photographs) (3): …’.