Article 1Annex IB to Regulation (EEC) No 3821/85 is amended as...
Article 2This Regulation shall enter into force on the twentieth day...

Commission Regulation (EU) 2016/130

of 1 February 2016

adapting to technical progress Council Regulation (EEC) No 3821/85 on recording equipment in road transport

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Council Regulation (EEC) No 3821/85 of 20 December 1985 on recording equipment in road transport1, and in particular Article 17 thereof,

Whereas:

(1)

Annex IB to Regulation (EEC) No 3821/85 sets out the technical specifications for the construction, testing, installation and inspection of digital tachographs.

(2)
Commission Regulation (EC) No 68/20092 introduced an adaptor as a temporary solution, until 31 December 2013, to make it possible to install tachographs in conformity with Annex IB to Regulation (EEC) No 3821/85 in M1 and N1 type vehicles.
(3)
Commission Regulation (EU) No 1161/20143 amended Regulation (EEC) No 3821/85 in order to extend the period of validity of the adaptor until 31 December 2015.
(4)
Regulation (EEC) No 3821/85 has been replaced by Regulation (EU) No 165/2014 of the European Parliament and of the Council4. However, in accordance with Article 46 of Regulation (EU) No 165/2014 the provisions of Regulation (EEC) No 3821/85, including Annex IB thereto, continue to apply, on a transitional basis, until the date of application of the implementing acts referred to in Regulation (EU) No 165/2014.
(5)

Recital 5 of Regulation (EU) No 165/2014 provides that the Commission will consider extending the period of validity of the adaptor for Ml and N1 vehicles until 2015 and give further consideration to a long-term solution for M1 and N1 vehicles before 2015.

(6)
The Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions ‘Digital tachograph: Roadmap for future activities’5, which accompanied the proposal for Regulation (EU) No 165/2014, foresees a time-frame of 2 years for the preparation and adoption of annexes and appendices, following the adoption of Regulation (EU) No 165/2014.
(7)

A permanent solution concerning the adaptor should be laid down in the technical specifications related to the implementation of Regulation (EU) No 165/2014. In application of the principle of legitimate expectation, the possibility to use adaptors in M1 and N1 type vehicles should therefore be extended at least until the adoption of those technical specifications by implementing acts.

(8)

The measures provided for in this Regulation are in accordance with the opinion of the Committee established by Article 42 of Regulation (EU) No 165/2014,

HAS ADOPTED THIS REGULATION: