Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code ( OJ L 253, 11.10.1993, p. 1 ). , However, the measure is not allowed where processing is carried out by retail or catering undertakings.’ , ‘*ex 2009 89 73 ex 2009 89 73 , 11 13 , Passion fruit juice and passion fruit juice concentrate, whether or not frozen: with a Brix value of 13,7 or more but not more than 55, of a value of more than EUR 30 per 100 kg net weight, in immediate packings of a content of 50 litres or more, and with added sugar for use in the manufacture of products of the food or drink industry ,0 %,31.12.2019, *ex 2009 89 99,94, Coconut water: unfermented, not containing added spirit or sugar, and in immediate packing of a content of 50 litres or more ,0 %,31.12.2016, *ex 2207 20 00 ex 2207 20 00 ex 3820 00 00 , 20 80 20 , Feedstock consisting of by weight: 88 % or more but not more than 92 % of ethanol, 2,2 % or more but not more than 2,7 % of monoethylene glycol, 1,0 % or more but not more than 1,3 % of methylethylketone, 0,36 % or more but not more than 0,40 % of anionic surfactant (ca. 30 % active), 0,0293 % or more but not more than 0,0396 % of methyl isopropylketone, 0,0195 % or more but not more than 0,0264 % of 5 methyl-3-heptanone, 10 ppm or more but not more than 12 ppm of denatonium benzoate (Bitrex), not more than 0,01 % of perfumes, 6,5 % or more but not more than 8,0 % of water, for use in the manufacture of screenwash concentrate and other de-icing preparations ,0 %,31.12.2018, ex 2710 19 99,20, Catalytic de-waxed base oil, produced by synthesis from gaseous hydrocarbons followed by a heavy paraffin conversion process (HPC), containing: not more than 1 mg/kg of sulphur more than 99 % by weight of saturated hydrocarbons more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; and a kinematic viscosity at 40 °C of more than 6,5 mm 2 /s, or a kinematic viscosity at 40 °C of more than 11 mm 2 /s with a viscosity index of 120 or more ,0 %,31.12.2019, *ex 2818 10 91,20, Sintered corundum with a microcrystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum and neodymium, with a content by weight (calculated as oxides) of: 94 % or more, but less than 98,5 % of aluminium oxide, 2 % (± 1,5 %) of magnesium oxide, 1 % (± 0,6 %) of yttrium oxide, and: either 2 % (± 1,2 %) of lanthanum oxide or 2 % (± 1,2 %) of lanthanum oxide and neodymium oxide, with less than 50 % of the total weight having a particle size of more than 10 mm ,0 %,31.12.2015, ex 2827 60 00,10,Sodium iodide (CAS RN 7681-82-5),0 %,31.12.2019, ex 2841 70 00,30,Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2),0 %,31.12.2019, ex 2903 39 90,35,Pentafluoroethane (CAS RN 354-33-6),0 %,31.12.2019, ex 2903 79 19,10,Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0),0 %,31.12.2019, ex 2904 90 95,80,1-Chloro-2-nitrobenzene (CAS RN 88-73-3),0 %,31.12.2019, ex 2905 22 00,10,Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-linalool (CAS RN 126-91-0),0 %,31.12.2019, ex 2907 12 00,30,p-Cresol (CAS RN 106-44-5),0 %,31.12.2019, ex 2907 29 00,25,4-Hydroxybenzyl alcohol (CAS RN 623-05-2),0 %,31.12.2019, ex 2907 29 00,65,2,2′-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8),0 %,31.12.2019, ex 2909 60 00,30,3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons,0 %,31.12.2019, ex 2914 69 90,50,Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8),0 %,31.12.2019, ex 2916 39 90,18,2,4-Dichlorophenylacetic acid (CAS RN 19719-28-9),0 %,31.12.2019, ex 2916 39 90,23,(2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6),0 %,31.12.2019, ex 2917 39 95,50,1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4),0 %,31.12.2019, ex 2917 39 95,60,Perylene-3,4:9,10-tetracarboxylic dianhydride (CAS RN 128-69-8),0 %,31.12.2019, ex 2918 29 00,70,3,5-Diiodosalicylic acid (CAS RN 133-91-5),0 %,31.12.2019, ex 2918 30 00,70,2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1),0 %,31.12.2019, ex 2918 99 90,55,Stearyl glycyrrhetinate (CAS RN 13832-70-7),0 %,31.12.2019, ex 2918 99 90,65,Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0),0 %,31.12.2019, ex 2918 99 90,75,3,4-Dimethoxybenzoic acid (CAS RN 93-07-2),0 %,31.12.2019, ex 2921 42 00,40,Sodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0 or 6106-22-5),0 %,31.12.2019, ex 2922 49 85,55,(E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CUS 0138070-7),0 %,31.12.2019, ex 2923 90 00,20,Tetramethylammonium hydrogen phthalate (CAS RN 79723-02-7),0 %,31.12.2019, ex 2924 19 00,35,Acetamide (CAS RN 60-35-5),0 %,31.12.2019, ex 2924 29 98,23,Benalaxyl-M (ISO) (CAS RN 98243-83-5),0 %,31.12.2019, ex 2924 29 98,33,N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7),0 %,31.12.2019, ex 2924 29 98,73,Napropamide (ISO) (CAS RN 15299-99-7),0 %,31.12.2019, *ex 2927 00 00,35,C,C′-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180 °C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam,0 %,31.12.2019, ex 2928 00 90,13,Cymoxanil (ISO) (CAS RN 57966-95-7),0 %,31.12.2019, ex 2928 00 90,18,Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more,0 %,31.12.2019, ex 2930 90 99,16,3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1),0 %,31.12.2019, ex 2930 90 99,21,[2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3),0 %,31.12.2016, ex 2930 90 99,27,2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0),0 %,31.12.2019, ex 2930 90 99,33,2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonic acid (CAS RN 42986-22-1),0 %,31.12.2019, ex 2933 39 99,11,2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride (CAS RN 153259-31-5),0 %,31.12.2019, ex 2933 39 99,21,Boscalid (ISO) (CAS RN 188425-85-6),0 %,31.12.2019, ex 2933 39 99,31,2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride (CAS RN 127337-60-4),0 %,31.12.2019, ex 2933 59 95,10,6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5),0 %,31.12.2019, ex 2933 69 80,75,Metamitron (ISO) (CAS RN 41394-05-2),0 %,31.12.2019, ex 2933 99 80,11,Fenbuconazole (ISO) (CAS RN 114369-43-6),0 %,31.12.2019, ex 2933 99 80,12,Myclobutanil (ISO) (CAS RN 88671-89-0),0 %,31.12.2019, ex 2933 99 80,19,2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0),0 %,31.12.2019, ex 2934 99 90,10,Fluralaner (INN) (CAS RN 864731-61-3),0 %,31.12.2019, ex 2934 99 90,16,Difenoconazole (ISO) (CAS RN 119446-68-3),0 %,31.12.2019, ex 2934 99 90,19,2-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] ethanol (CAS RN 329216-67-3),0 %,31.12.2019, ex 2935 00 90,10,Florasulam (ISO) (CAS RN 145701-23-1),0 %,31.12.2019, ex 3204 12 00,60,Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight,0 %,31.12.2019, ex 3204 13 00,50,Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight,0 %,31.12.2019, ex 3204 13 00,60,Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight,0 %,31.12.2019, ex 3204 14 00,10,Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight,0 %,31.12.2019, ex 3204 14 00,20,Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight,0 %,31.12.2019, ex 3204 14 00,30,C.I. Colourant Direct Red 23 (CAS RN 3441-14-3 ) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight,0 %,31.12.2019, ex 3204 17 00,45,Colourant C.I. Pigment Yellow 174 (CAS RN 4118-16-5), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight,0 %,31.12.2018, ex 3204 17 00,67,Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight.,0 %,31.12.2018, ex 3204 90 00,10,Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight,0 %,31.12.2019, ex 3212 10 00 ex 7607 20 90 , 10 30 , Metallised film: consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more, with an optical density of each aluminium layer of not more than 3.0, with each aluminium layer separated by a resin layer, on a carrier film of PET, and on rolls of up to 50 000 metres in length ,0 %,31.12.2019, ex 3808 94 20,30, Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing: 1,3-dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5), 1,3-dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5), 1-bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and 1-chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7) ,0 %,31.12.2019, ex 3811 21 00,23, Additives containing: polyisobutene succinimide derived from reaction of polyethylenepropylamide with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), more than 31,9 % but not more than 43,3 % by weight of mineral oils, and not more than 0,05 % by weight chlorine, having a total base number (TBN) greater than 20, for use in the manufacture of additives blends for lubricating oils ,0 %,31.12.2019, *ex 3811 21 00,53, Additives containing: overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and by weight more than 40 % but not more than 60 % of mineral oil, having a total base number (TNB) of 280 or more but not more than 420, for use in the manufacture of lubricating oils ,0 %,31.12.2019, *ex 3811 21 00,73, Additives containing: borated succinimide compounds (CAS RN 134758-95-5), and mineral oils, having a total base number (TBN) greater than 40, for use in the manufacture of additive mixtures for lubricating oils ,0 %,31.12.2018, ex 3812 30 29,10,4,4′-Isopropylidenediphenol C12-15 alcohol phosphite containing by weight 1 % or more but not more than 3 % of bisphenol A (CAS RN 96152-48-6),0 %,31.12.2019, ex 3824 90 92,82,T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene,0 %,31.12.2019, *ex 3824 90 92,83, Preparation consisting of two or more of the following glycols: dipropylene glycol, tripropylene glycol, tetrapropylene glycol or pentapropylene glycol ,0 %,31.12.2017, *ex 3824 90 93,46, Sodium hydrogen 3-aminonaphthalene-1,5-disulfonate (CAS RN 4681-22-5) containing by weight: not more than 20 % of disodium sulphate, and not more than 5 % of sodium chloride ,0 %,31.12.2015, *ex 3901 10 10 ex 3901 90 90 , 20 50 , High-flow linear low-density polyethylene-1-butene (LLDPE) (CAS RN 25087-34-7) in form of powder, with: a melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min, a density (ASTM D 1505) of 0,922 g/cm 3 or more, but not more than 0,926 g/cm 3 , and a vicat softening temperature of min. 94 °C ,0 %,31.12.2019, ex 3901 10 10,30, Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with: not more than 5 % by weight of comonomer, a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min, and a density of 0,922 g/cm 3 or more, but not more than 0,928 g/cm 3 ,0 %,31.12.2018, *ex 3901 90 90,60, Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with: more than 5 %, but not more than 8 % by weight of comonomer, a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min, and a density of 0,922 g/cm 3 or more, but not more than 0,928 g/cm 3 ,0 %,31.12.2018, *ex 3903 19 00,40, Crystalline polystyrene with: a melting point of 268 °C or more but not more than 272 °C, and a setting point of 232 °C or more but not more than 247 °C, whether or not containing additives and filling material ,0 %,31.12.2016, ex 3903 90 90,45, Preparation, in form of powder, containing by weight: 86 % or more but not more than 90 % of styrene-acrylic-copolymer and 9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3) ,0 %,31.12.2019, ex 3903 90 90,55, Preparation, in form of an aqueous suspension, containing by weight: 25 % or more but not more than 26 % of styrene-acrylic-copolymer and 5 % or more but not more than 6 % of glycol ,0 %,31.12.2019, ex 3908 90 00,70, Copolymer containing: 1,3-benzenedimethanamine (CAS RN 1477-55-0) and adipic acid (CAS RN 124-04-9), whether or not containing isophthalic acid (CAS RN 121-91-5) ,0 %,31.12.2019, ex 3911 90 19,60,Formaldehyde, polymer with 1,3-dimethylbenzene and tert-butyl-phenol (CAS RN 60806-48-6),0 %,31.12.2019, ex 3911 90 19,70, Preparation containing: cyanic acid, C,C′-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1), and 1,3-bis(4-cyanophenyl)propane (CAS RN 1156-51-0), in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight ,0 %,31.12.2019, *ex 3912 20 19,10,Nitrocellulose (CAS RN 9004-70-0),0 %,31.12.2016, *ex 3919 10 80 ex 3919 90 00 ex 3920 61 00 , 57 30 30 , Reflecting sheet: of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern covered on one or both sides with one or more layers of plastic or metallisation, and whether or not covered on one side with a self-adhesive layer and a release sheet ,0 %,31.12.2018, *ex 3919 10 80 ex 3919 90 00 , 67 46 , Self-adhesive reflecting sheet whether or not in segmented pieces: showing a regular pattern, with or without an application tape layer, consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) or polycarbonate containing microprisms, whether or not containing an additional layer of polyester and an adhesive with a final release sheet ,0 %,31.12.2018, *ex 3919 90 00,48, Transparent poly(vinyl chloride) film: coated on one side with an acrylic UV-sensitive adhesive with an adhesive strength of 70 N/m or more, which is reduced upon irradiation, with a polyester liner with a total thickness without release liner of 78 μm or more ,0 %,31.12.2019, ex 3920 10 28,30, Printed embossed film: of polymers of ethylene having a gravity of 0,94 g/cm 3 or more of a thickness of 0,019 mm ± 0,003 mm with permanent graphics consisting of two different alternating designs whose individual length is 525 mm or more ,0 %,31.12.2019, *ex 3920 62 19,60, Poly(ethylene terephtalate) film: of a thickness of not more than 20 μm, coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2 μm ,0 %,31.12.2017, ex 3920 69 00,50, Monolayer, biaxially oriented film: composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc, having a thickness of 20 μm or more but not more than 120 μm biodegradable and compostable (as determined by the method EN 13432) ,0 %,31.12.2019, ex 3920 69 00,60, Monolayer, transverse oriented, shrink film: composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid), having a thickness of 45 μm or more but not more than 50 μm, biodegradable and compostable (as determined by the method EN 13432) ,0 %,31.12.2019, ex 3920 79 10,10,Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm,0 %,31.12.2019, ex 3920 99 28,65, Matt, thermoplastic polyurethane foil in rolls with: a width of 1 640 mm (± 10 mm), a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457), a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287), a thickness of more than 365 μm but not more than 760 μm, a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)), an elongation to break of 470 % (as determined by the method: EN ISO 527) ,0 %,31.12.2019, ex 3920 99 28,75, Thermoplastic polyurethane foil in rolls with: a width of more than 900 mm but not more than 1 016 mm, a matt finish, a thickness of 0,43 mm (± 0,03 mm), an elongation to break of 420 % or more but not more than 520 %, a tensile strength of 55 N/mm 2 (± 3) (as determined by the method EN ISO 527) a hardness of 90 (± 4) (as determined by the method: Shore A [ASTM D2240]), wrinkle inside (waves) of 6,35 mm, a flatness of 0,025 mm ,0 %,31.12.2019, ex 3921 90 60,30, Heat-, infra- and UV insulating poly(vinyl butyral) film: laminated with a metal layer with a thickness of 0,05 mm (± 0,01 mm), containing by weight 29,75 % or more but not more than 40,25 % of triethyleneglycol di (2-ethyl hexanoate) as plasticizer, with a light transmission of 70 % or more (as determined by the ISO 9050 standard), with an UV transmission of 1 % or less (as determined by the ISO 9050 standard), with a total thickness of 0,43 mm (± 0,043 mm) ,0 %,31.12.2019, ex 6804 21 00,10, Discs: of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy, having a self-sharpening effect by constant release of the diamonds, suitable for abrasive cutting of wafers, whether or not containing a hole in the centre, whether or not on a support ,0 %,31.12.2019, ex 7409 11 00 ex 7409 19 00 ex 7410 11 00 , 10 10 20 ,Refined copper foil and strips of a thickness of not more than 400 μm,0 %,31.12.2019, *ex 7606 12 92 ex 7607 11 90 , 30 50 , Aluminium and magnesium alloy strip or foil: in rolls, of a thickness of 0,14 mm or more but not more than 0,40 mm, a width of 12,5 mm or more but not more than 359 mm, a tensile strength of 285 N/mm 2 or more, and an elongation at break of 1 % or more, and containing by weight: 93,3 % or more of aluminium, 0,8 % or more but not more than 5 % of magnesium, and not more than 1,8 % of other elements ,0 %,31.12.2017, *ex 7607 11 90,60, Plain aluminium foil with the following parameters: an aluminium content of 99,98 % or more, a thickness of 0,070 mm or more but not more than 0,125 mm, with a cubic texture, of a kind used for high voltage etching ,0 %,31.12.2016, ex 7616 99 10,30, Aluminium engine bracket, with dimensions of: height of more than 10 mm but not more than 200 mm, width of more than 10 mm but not more than 200 mm, length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: internal porosity not more than 1 mm, outer porosity not more than 2 mm, Rockwell hardness HRB 10 or more, of a kind used in the production of suspensions systems for engines in motor vehicles ,0 %,31.12.2019, *ex 8108 90 30,50,Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928, 4965 and 4967,0 %,31.12.2015, ex 8108 90 50,80, Plates, sheets, strips and foil of non-alloyed titanium: of a width of more than 750 mm, of a thickness of not more than 3 mm ,0 %,31.12.2019, ex 8108 90 50,85, Strip or foil of non-alloyed titanium: containing more than 0,07 % by weight of oxygen (O 2 ), of a thickness of 0,4 mm or more but not more than 2,5 mm, conforming to the Vickers hardness HV1 standard of not more than 170, of a kind used in the manufacture of welded tubes for nuclear power plant condensers ,0 %,31.12.2019, ex 8409 99 00 ex 8411 99 00 , 30 70 , Spiral-shaped gas turbine turbocharger component: with a heat-resistance of not more than 1 050 °C, with a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm, whether or not with an engine exhaust manifold ,0 %,31.12.2018, ex 8411 99 00,60, Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686, with a heat-resistance of not more than 1 100 °C, with a diameter of 30 mm or more, but not more than 100 mm, with a height of 20 mm or more, but not more than 70 mm ,0 %,31.12.2017, ex 8479 89 97,70,Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy,0 %,31.12.2019, ex 8479 89 97,80,Machinery for the production of a sub assembled component (anode conductor and the negative closing cap) for the manufacture of AA and/or AAA alkaline batteries ,0 %,31.12.2019, *ex 8483 30 38,40, Cylindrical bearing housing: of precision-cast grey cast iron complying with standard DIN EN 1561, with oil chambers, without bearings, with a diameter of 50 mm or more, but not more than 250 mm, with a height of 40 mm or more, but not more than 150 mm, whether or not with water chambers and connectors ,0 %,31.12.2017, ex 8501 32 00 ex 8501 33 00 , 60 15 , Traction motor, with: a torque output of 200 Nm or more but not more than 300 Nm, a power output of 50 kW or more but not more than 100 kW, a speed of not more than 12 500 rpm, for use in the manufacture of electric vehicles ,0 %,31.12.2019, ex 8504 40 88,30,DC to AC inverter for use in traction motor control for use in the manufacture of electric vehicles ,0 %,31.12.2019, ex 8504 40 90,80, Power converter containing: a DC to DC converter, a charger of a capacity of not more than 7 kW, switching functions, for use in the manufacture of electric vehicles ,0 %,31.12.2019, ex 8505 90 20,30, Coil for an electromagnetic valve, with: a plunger, a diameter of 12,9 mm (± 0,1), a height without plunger of 20,5 mm (± 0,1), an electric cable with connector, and in a cylindrical metal housing ,0 %,31.12.2019, *ex 8507 10 20,30, Lead-acid accumulators or modules, of a kind used for starting piston engines, with: a nominal capacity of not more 32 Ah, a length of not more than 205 mm, a width of not more than 130 mm and a height of not more than 190 mm, for use in the manufacture of articles of CN code 8711 ,0 %,31.12.2018, *ex 8507 60 00,85, Rectangular modules for incorporation in lithium-ion rechargeable batteries: of a length of 312 mm or more, but not more than 350 mm, of a width of 79,8 mm or more, but not more than 225 mm, of a height of 35 mm or more, but not more than 168 mm, of a weight of 3,95 kg or more, but not more than 8,56 kg, with a rating of 66,6 Ah or more, but not more than 129 Ah ,0 %,31.12.2015, ex 8507 60 00,87, Lithium-ion rechargeable batteries, with: a length of 1 475 mm or more, but not more than 2 820 mm, a width of 935 mm or more, but not more than 1 660 mm, a height of 260 mm or more, but not more than 600 mm, a weight of 320 kg or more, but not more than 700 kg, a nominal capacity of 18,4 Ah or more, but not more than 130 Ah, put up in packs of 12 or 16 modules ,0 %,31.12.2017, *ex 8511 30 00,30, Igniter integrated coil assembly with: an igniter, a coil on plug assembly with an integrated mounting bracket, a housing, a length of 90 mm or more but not more than 200 mm (± 5 mm), an operating temperature of – 40 °C or more but not more than 130 °C, a voltage of 10,5 V or more, but not more than 16 V ,0 %,31.12.2019, ex 8512 20 00,10, Fog lamps with galvanised inner surface, containing: plastic holder with four or more brackets, one or more, but not more than two 12 V bulbs, connection cable with a connector, plastic cover, for use in the manufacture of goods of Chapter 87 ,0 %,31.12.2019, ex 8512 20 00,20,Information screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12 V or more, but not more than 14,4 V, of a kind used in the manufacture of goods of Chapter 87,0 %,31.12.2019, ex 8512 30 90,10, Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising: coil, magnet, metal membrane, connector, holder, of a kind used in the manufacture of goods of Chapter 87 ,0 %,31.12.2019, ex 8512 90 90,10, Ultrasonic parking sensor with: printed circuit board inside the housing and sensor cell on the cover connected through terminal pins, an operating voltage of not more than 12 V, ability to receive and transmit signals processed by the control unit, of a kind used in the manufacture of goods of Chapter 87 ,0 %,31.12.2019, ex 8514 20 80 ex 8516 50 00 ex 8516 60 80 , 10 10 10 , Cavity assembly comprising at least: a transformer with an input of not more than 240 V and an output of not more than 3 000 W, an AC or DC fan motor with an output of not more than 42 watts, a housing made of stainless steel, with or without a magnetron of a microwave output power of not more than 900 W. for use in the manufacture of built-in products of CN codes 8514 20 80, 8516 50 00 and 8516 60 80 ,0 %,31.12.2019, ex 8516 90 00,80,Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of CN codes 8514 20 80, 8516 50 00 and 8516 60 80 ,0 %,31.12.2019, ex 8518 90 00,80, Integrated car loudspeaker housing, consisting of: a speaker frame and magnet system holder with a protective coating and an embossed anti-dust cloth ,0 %,31.12.2019, *ex 8525 80 19,60, Image scanning cameras, using: a “Dynamic”- or “Static overlay lines” system, an output NTSC video signal, a voltage of 6,5 V or more, an illuminance of 0,5 lux or more ,0 %,31.12.2019, *ex 8527 91 99 ex 8529 90 65 , 20 85 , Assembly consisting of at least: an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator, a transformer and a radio broadcast receiver for use in the manufacture of consumer electronic products ,0 %,31.12.2019, ex 8529 10 80,70, Ceramic filters: with an applicable frequency range of 10 kHz or more but no more than 100 MHz, with a housing of ceramic plates provided with electrodes, of a kind used in electrical-mechanical transducer or resonator in audio visual and communication equipment ,0 %,31.12.2019, ex 8529 90 65,80,Tuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading 8527 ,0 %,31.12.2019, *ex 8529 90 92 ex 8548 90 90 , 15 60 , LCD modules: solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with one or more printed circuits boards with control electronics for pixel addressing only, with or without backlight unit and with or without inverters ,0 %,31.12.2018, ex 8537 10 99,40, Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of: a length of 50 mm or more, but not more than 120 mm, a width of 20 mm or more but not more than 40 mm, a height of 30 mm or more, but not more than 120 mm, of a kind used in the manufacture of goods of Chapter 87 ,0 %,31.12.2019, ex 8537 10 99,50, Electronic control unit BCM (Body Control Module) comprising: plastic box with printed circuit board and metal holder, with voltage of 9 V or more, but not more than 16 V, able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder, of a kind used in the manufacture of goods of Chapter 87 ,0 %,31.12.2019, ex 8537 10 99,60, Electronic assembly consisting of: a microprocessor, light-emitting diode (LED) or liquid crystal display (LCD) indicators, electronic components mounted on a printed circuit, for use in the manufacture of built-in products of CN codes 8514 20 80, 8516 50 00 and 8516 60 80 ,0 %,31.12.2019, ex 8544 49 91,10, Insulated copper electrical wires: with individual conductor wires of a diameter exceeding 0,51 mm, for a voltage of not more than 1 000 V, for use in the manufacture of automotive cable harnesses ,0 %,31.12.2019, *ex 8548 90 90,65, LCD modules: solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with one or more printed circuits boards with control electronics for pixel addressing only, with or without backlight unit and with or without inverters ,0 %,31.12.2018, ex 8708 30 10,10, Brake unit assembly comprising electric control brake, stroke sensor, VDC (vehicle dynamic control) and backup power source, for use in the manufacture of vehicles ,0 %,31.12.2019, ex 8708 30 91,20,Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 ,0 %,31.12.2019, ex 8708 30 91,30,Body of disc type brake in BIR (“Ball in Ramp”) or EPB (“Electronic Parking Brake”) version containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87,0 %,31.12.2019, ex 8708 91 35,10,Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87,0 %,31.12.2019, ex 8708 94 35,20,Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87,0 %,31.12.2019, ex 9002 11 00,80, Lens assembly with: a field of view range of 58,5 deg or more, but not more than 194 deg, a focal length of 1,16 mm or more, but not more than 3,88 mm, a relative aperture of F/2.0 or more but not more than 2.6, a diameter of 17 mm or more but not more than 18,5 mm, for use in the manufacture of CMOS automotive cameras ,0 %,31.12.2019, ex 9029 10 00,30,Speed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped with plastic housing and attached to connecting cable with a joining connector and mounting holders of a kind used in the manufacture of goods of Chapter 87,0 %,31.12.2019, ex 9029 20 31 ex 9029 90 00 , 10 20 , Clustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least: speed, engine revolutions, engine temperature, the fuel level communicating via CAN-BUS and K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87 ,0 %,31.12.2019, ex 9031 80 34,50, Programmable dual linear Hall sensor: consisting of two non-electrically connected integrated circuits, a top die and a bottom die, positioned on the top and bottom of a lead frame, in a semiconductor housing, for use as a means for measuring angles, positions and currents in cars ,0 %,31.12.2019, ex 9031 80 38,50, Gyroscopic sensor for measuring lateral acceleration of the vehicle vertical axis comprising: a piezoelectric crystal for generating an electrical potential during deformation and a plastic box with metal holder, of a kind used in the manufacture of goods of Chapter 87 ,0 %,31.12.2019, ex 9031 80 38,60,Congestion sensor, printed circuit board and connector, moulded together in plastic, for monitoring congestion “G” and providing the values for further evaluation of triggering the airbags, of a kind used in the manufacture of goods of Chapter 87,0 %,31.12.2019, ex 9031 80 98,30,Functional Test Machine for calibrating and image quality testing lenses in automotive cameras,0 %,31.12.2019, ‘ex 2009 89 73,11, ex 2009 89 73,13, ex 2009 89 99,93, ex 2207 20 00,20, ex 2207 20 00,80, ex 2818 10 91,10, ex 2915 90 70,40, ex 2921 45 00,10, ex 2927 00 00,15, ex 2932 99 00,35, ex 2934 99 90,33, ex 3204 20 00,40, ex 3811 21 00,43, ex 3811 21 00,53, ex 3820 00 00,20, ex 3824 90 92,52, ex 3901 10 10,10, ex 3901 10 10,20, ex 3901 90 90,30, ex 3901 90 90,40, ex 3901 90 90,50, ex 3903 19 00,30, ex 3912 20 11,10, ex 3919 10 80,21, ex 3919 10 80,65, ex 3919 90 00,21, ex 3919 90 00,37, ex 3919 90 00,57, ex 3920 61 00,20, ex 3920 62 19,81, ex 7606 12 92,20, ex 7607 11 90,10, ex 7607 11 90,20, ex 8108 90 30,30, ex 8411 99 00,30, ex 8411 99 00,40, ex 8483 30 38,30, ex 8504 50 95,60, ex 8507 10 20,85, ex 8507 60 00,35, ex 8507 60 00,70, ex 8511 30 00,20, ex 8525 80 19,35, ex 8527 21 59,10, ex 8527 29 00,20, ex 8527 29 00,30, ex 8527 91 99,10, ex 8529 90 65,35, ex 8529 90 92,44, ex 8543 70 90,13, ex 8543 70 90,23, ex 8548 90 90,47, ex 8548 90 90,49, ex 8548 90 90,55, ex 9405 40 39,50, ex 9405 40 39,60, ex 9405 40 99,03, ex 9405 40 99,06’, ‘9031 80 34,50,1 000 p/st, 8544 49 91,10,m, 3901 10 10,30,m 3 , 3901 90 90,60,m 3 , 3920 99 28,65,m 2 , 3920 99 28,75,m 2 , 3921 90 60,30,m 2 , 3903 90 90,45,m 3 , 3920 79 10,10,p/st, 6804 21 00,10,p/st, 7616 99 10,30,p/st, 8409 99 00,30,p/st, 8411 99 00,60,p/st, 8411 99 00,70,p/st, 8479 89 97,70,p/st, 8479 89 97,80,p/st, 8483 30 38,40,p/st, 8504 40 88,30,p/st, 8504 40 90,80,p/st, 8505 90 20,30,p/st, 8511 30 00,30,p/st, 8512 20 00,10,p/st, 8512 20 00,20,p/st, 8512 30 90,10,p/st, 8512 90 90,10,p/st, 8514 20 80,10,p/st, 8516 90 00,80,p/st, 8518 90 00,80,p/st, 8529 10 80,70,p/st, 8529 90 65,80,p/st, 8529 90 92,15,p/st, 8537 10 99,40,p/st, 8537 10 99,50,p/st, 8537 10 99,60,p/st, 8548 90 90,60,p/st, 8548 90 90,65,p/st, 8708 30 10,10,p/st, 8708 30 91,20,p/st, 8708 30 91,30,p/st, 8708 91 35,10,p/st, 8708 94 35,20,p/st, 9029 10 00,30,p/st, 9029 20 31,10,p/st, 9029 90 00,20,p/st, 9031 80 38,50,p/st, 9031 80 38,60,p/st, 9031 80 98,30,p/st’, ‘3901 10 10,10,m 3 , 3901 90 90,30,m 3 , 8411 99 00,30,p/st, 8411 99 00,40,p/st, 8483 30 38,30,p/st, 8504 50 95,60,p/st, 8511 30 00,20,p/st, 8527 29 00,30,p/st, 8529 90 92,44,p/st, 8543 70 90,13,p/st, 8543 70 90,23,p/st, 8548 90 90,47,p/st, 8548 90 90,49,p/st, 8548 90 90,55,p/st, 9405 40 39,50,p/st, 9405 40 99,03,p/st, 9405 40 99,06,p/st’,