Council Regulation (EU) 2015/982
of 23 June 2015
amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,
Having regard to the proposal from the European Commission,
Whereas:
It is no longer in the interest of the Union to maintain the suspension of autonomous Common Customs Tariff duties on 15 of the products that are currently listed in Annex I to Regulation (EU) No 1387/2013. Those products should, therefore, be deleted from that Annex.
It is necessary to modify the product descriptions of 27 suspensions included in Annex I to Regulation (EU) No 1387/2013 in order to take account of technical product developments and economic trends in the market or to carry out linguistic adaptations. Moreover, following further scrutiny of the products specifications, CN codes for two additional products should be amended. The suspensions in respect of which modifications are necessary should be deleted from the list of suspensions in Annex I to Regulation (EU) No 1387/2013, and the modified suspensions should be inserted into that list.
In the interest of clarity, the modified entries should be marked with an asterisk.
In order to allow for appropriate statistical monitoring, Annex II to Regulation (EU) No 1387/2013 should be completed with supplementary units for some of the new products for which suspensions are granted. For reasons of consistency, the supplementary units assigned to the products deleted from Annex I to Regulation (EU) No 1387/2013 should also be deleted from Annex II to that Regulation.
It should be clarified that any mixtures, preparations or products made up of different components containing products subject to autonomous tariff suspensions are not covered by Annex I to Regulation (EU) No 1387/2013.
Regulation (EU) No 1387/2013 should therefore be amended accordingly.
Following specific administrative arrangements, the amendments pursuant to this Regulation have to take effect from 1 July 2015. This Regulation should apply from that date.
with TARIC code 2930 90 99 21, the suspension relating to those products should apply from 1 January 2014;
with TARIC code 8507 60 00 87, the suspension relating to those products should apply from 1 July 2014;
with TARIC codes 8409 99 00 30, 8411 99 00 60 and 8411 99 00 70, the suspension relating to those products should apply from 1 January 2015,
HAS ADOPTED THIS REGULATION:
Article 1
Regulation (EU) No 1387/2013 is amended as follows:
- (1)
Article 1 is replaced by the following:
‘Article 1
1.
The autonomous Common Customs Tariff duties for the agricultural and industrial products listed in Annex I are hereby suspended.
2.
Paragraph 1 does not apply to any mixtures, preparations or products made up of different components containing products listed in Annex I.’.
- (2)
Annexes I and II are amended as set out in the Annex to this Regulation.
Article 2
This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.
It shall apply from 1 July 2015.
However, the suspension relating to products:
with TARIC code 2930 90 99 21 shall apply from 1 January 2014;
with TARIC code 8507 60 00 87 shall apply from 1 July 2014;
with TARIC codes 8409 99 00 30, 8411 99 00 60 and 8411 99 00 70 shall apply from 1 January 2015.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Luxembourg, 23 June 2015.
For the Council
The President
E. Rinkēvičs
ANNEX
The Annexes to Regulation (EU) No 1387/2013 are amended as follows:
- (1)
Annex I is amended as follows:
- (a)
the note between the title and the table is replaced by the following note:
‘(*)
Suspension relating to a product in this Annex with regard to which the CN or TARIC code or the product description or the mandatory review date were amended by Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products (OJ L 192, 1.7.2014, p. 9), by Council Regulation (EU) No 1341/2014 of 15 December 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products or by Council Regulation (EU) 2015/982 of 23 June 2015 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products (OJ L 159, 25.6.2015, p. 5)’;
- (b)
the following rows for the products are inserted following the order of the CN codes indicated in the first column of the table:
CN code
TARIC
Description
Rate of autonomous duty
Date foreseen for mandatory review
‘*ex 2009 89 73
ex 2009 89 73
11
13
Passion fruit juice and passion fruit juice concentrate, whether or not frozen:
with a Brix value of 13,7 or more but not more than 55,
of a value of more than EUR 30 per 100 kg net weight,
in immediate packings of a content of 50 litres or more, and
with added sugar
for use in the manufacture of products of the food or drink industry20 %
31.12.2019
*ex 2009 89 99
94
Coconut water:
unfermented,
not containing added spirit or sugar, and
- in immediate packing of a content of 50 litres or more3
0 %
31.12.2016
*ex 2207 20 00
ex 2207 20 00
ex 3820 00 00
20
80
20
Feedstock consisting of by weight:
88 % or more but not more than 92 % of ethanol,
2,2 % or more but not more than 2,7 % of monoethylene glycol,
1,0 % or more but not more than 1,3 % of methylethylketone,
0,36 % or more but not more than 0,40 % of anionic surfactant (ca. 30 % active),
0,0293 % or more but not more than 0,0396 % of methyl isopropylketone,
0,0195 % or more but not more than 0,0264 % of 5 methyl-3-heptanone,
10 ppm or more but not more than 12 ppm of denatonium benzoate (Bitrex),
not more than 0,01 % of perfumes,
6,5 % or more but not more than 8,0 % of water,
for use in the manufacture of screenwash concentrate and other de-icing preparations2
0 %
31.12.2018
ex 2710 19 99
20
Catalytic de-waxed base oil, produced by synthesis from gaseous hydrocarbons followed by a heavy paraffin conversion process (HPC), containing:
not more than 1 mg/kg of sulphur
more than 99 % by weight of saturated hydrocarbons
more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; and
a kinematic viscosity at 40 °C of more than 6,5 mm2/s, or
a kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more
0 %
31.12.2019
*ex 2818 10 91
20
Sintered corundum with a microcrystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum and neodymium, with a content by weight (calculated as oxides) of:
94 % or more, but less than 98,5 % of aluminium oxide,
2 % (± 1,5 %) of magnesium oxide,
1 % (± 0,6 %) of yttrium oxide,
and:
either 2 % (± 1,2 %) of lanthanum oxide or
2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,
with less than 50 % of the total weight having a particle size of more than 10 mm
0 %
31.12.2015
ex 2827 60 00
10
Sodium iodide (CAS RN 7681-82-5)
0 %
31.12.2019
ex 2841 70 00
30
Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2)
0 %
31.12.2019
ex 2903 39 90
35
Pentafluoroethane (CAS RN 354-33-6)
0 %
31.12.2019
ex 2903 79 19
10
Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0)
0 %
31.12.2019
ex 2904 90 95
80
1-Chloro-2-nitrobenzene (CAS RN 88-73-3)
0 %
31.12.2019
ex 2905 22 00
10
Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-linalool (CAS RN 126-91-0)
0 %
31.12.2019
ex 2907 12 00
30
p-Cresol (CAS RN 106-44-5)
0 %
31.12.2019
ex 2907 29 00
25
4-Hydroxybenzyl alcohol (CAS RN 623-05-2)
0 %
31.12.2019
ex 2907 29 00
65
2,2′-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8)
0 %
31.12.2019
ex 2909 60 00
30
3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons
0 %
31.12.2019
ex 2914 69 90
50
Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8)
0 %
31.12.2019
ex 2916 39 90
18
2,4-Dichlorophenylacetic acid (CAS RN 19719-28-9)
0 %
31.12.2019
ex 2916 39 90
23
(2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6)
0 %
31.12.2019
ex 2917 39 95
50
1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4)
0 %
31.12.2019
ex 2917 39 95
60
Perylene-3,4:9,10-tetracarboxylic dianhydride (CAS RN 128-69-8)
0 %
31.12.2019
ex 2918 29 00
70
3,5-Diiodosalicylic acid (CAS RN 133-91-5)
0 %
31.12.2019
ex 2918 30 00
70
2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1)
0 %
31.12.2019
ex 2918 99 90
55
Stearyl glycyrrhetinate (CAS RN 13832-70-7)
0 %
31.12.2019
ex 2918 99 90
65
Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0)
0 %
31.12.2019
ex 2918 99 90
75
3,4-Dimethoxybenzoic acid (CAS RN 93-07-2)
0 %
31.12.2019
ex 2921 42 00
40
Sodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0 or 6106-22-5)
0 %
31.12.2019
ex 2922 49 85
55
(E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CUS 0138070-7)
0 %
31.12.2019
ex 2923 90 00
20
Tetramethylammonium hydrogen phthalate (CAS RN 79723-02-7)
0 %
31.12.2019
ex 2924 19 00
35
Acetamide (CAS RN 60-35-5)
0 %
31.12.2019
ex 2924 29 98
23
Benalaxyl-M (ISO) (CAS RN 98243-83-5)
0 %
31.12.2019
ex 2924 29 98
33
N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7)
0 %
31.12.2019
ex 2924 29 98
73
Napropamide (ISO) (CAS RN 15299-99-7)
0 %
31.12.2019
*ex 2927 00 00
35
C,C′-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180 °C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam
0 %
31.12.2019
ex 2928 00 90
13
Cymoxanil (ISO) (CAS RN 57966-95-7)
0 %
31.12.2019
ex 2928 00 90
18
Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more
0 %
31.12.2019
ex 2930 90 99
16
3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1)
0 %
31.12.2019
ex 2930 90 99
21
[2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)
0 %
31.12.2016
ex 2930 90 99
27
2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0)
0 %
31.12.2019
ex 2930 90 99
33
2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonic acid (CAS RN 42986-22-1)
0 %
31.12.2019
ex 2933 39 99
11
2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride (CAS RN 153259-31-5)
0 %
31.12.2019
ex 2933 39 99
21
Boscalid (ISO) (CAS RN 188425-85-6)
0 %
31.12.2019
ex 2933 39 99
31
2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride (CAS RN 127337-60-4)
0 %
31.12.2019
ex 2933 59 95
10
6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5)
0 %
31.12.2019
ex 2933 69 80
75
Metamitron (ISO) (CAS RN 41394-05-2)
0 %
31.12.2019
ex 2933 99 80
11
Fenbuconazole (ISO) (CAS RN 114369-43-6)
0 %
31.12.2019
ex 2933 99 80
12
Myclobutanil (ISO) (CAS RN 88671-89-0)
0 %
31.12.2019
ex 2933 99 80
19
2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0)
0 %
31.12.2019
ex 2934 99 90
10
Fluralaner (INN) (CAS RN 864731-61-3)
0 %
31.12.2019
ex 2934 99 90
16
Difenoconazole (ISO) (CAS RN 119446-68-3)
0 %
31.12.2019
ex 2934 99 90
19
2-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] ethanol (CAS RN 329216-67-3)
0 %
31.12.2019
ex 2935 00 90
10
Florasulam (ISO) (CAS RN 145701-23-1)
0 %
31.12.2019
ex 3204 12 00
60
Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight
0 %
31.12.2019
ex 3204 13 00
50
Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight
0 %
31.12.2019
ex 3204 13 00
60
Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight
0 %
31.12.2019
ex 3204 14 00
10
Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight
0 %
31.12.2019
ex 3204 14 00
20
Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight
0 %
31.12.2019
ex 3204 14 00
30
C.I. Colourant Direct Red 23 (CAS RN 3441-14-3 ) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight
0 %
31.12.2019
ex 3204 17 00
45
Colourant C.I. Pigment Yellow 174 (CAS RN 4118-16-5), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight
0 %
31.12.2018
ex 3204 17 00
67
Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight.
0 %
31.12.2018
ex 3204 90 00
10
Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight
0 %
31.12.2019
ex 3212 10 00
ex 7607 20 90
10
30
Metallised film:
consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,
with an optical density of each aluminium layer of not more than 3.0,
with each aluminium layer separated by a resin layer,
on a carrier film of PET, and
on rolls of up to 50 000 metres in length
0 %
31.12.2019
ex 3808 94 20
30
Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:
1,3-dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),
1,3-dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),
1-bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and
1-chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)
0 %
31.12.2019
ex 3811 21 00
23
Additives containing:
polyisobutene succinimide derived from reaction of polyethylenepropylamide with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),
more than 31,9 % but not more than 43,3 % by weight of mineral oils, and
not more than 0,05 % by weight chlorine,
having a total base number (TBN) greater than 20,
for use in the manufacture of additives blends for lubricating oils2
0 %
31.12.2019
*ex 3811 21 00
53
Additives containing:
overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and
by weight more than 40 % but not more than 60 % of mineral oil,
having a total base number (TNB) of 280 or more but not more than 420,
for use in the manufacture of lubricating oils2
0 %
31.12.2019
*ex 3811 21 00
73
Additives containing:
borated succinimide compounds (CAS RN 134758-95-5), and
mineral oils,
having a total base number (TBN) greater than 40,
for use in the manufacture of additive mixtures for lubricating oils2
0 %
31.12.2018
ex 3812 30 29
10
4,4′-Isopropylidenediphenol C12-15 alcohol phosphite containing by weight 1 % or more but not more than 3 % of bisphenol A (CAS RN 96152-48-6)
0 %
31.12.2019
ex 3824 90 92
82
T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene
0 %
31.12.2019
*ex 3824 90 92
83
Preparation consisting of two or more of the following glycols:
dipropylene glycol,
tripropylene glycol,
tetrapropylene glycol or
pentapropylene glycol
0 %
31.12.2017
*ex 3824 90 93
46
Sodium hydrogen 3-aminonaphthalene-1,5-disulfonate (CAS RN 4681-22-5) containing by weight:
not more than 20 % of disodium sulphate, and
not more than 5 % of sodium chloride
0 %
31.12.2015
*ex 3901 10 10
ex 3901 90 90
20
50
High-flow linear low-density polyethylene-1-butene (LLDPE) (CAS RN 25087-34-7) in form of powder, with:
a melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min,
a density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3, and
a vicat softening temperature of min. 94 °C
0 %
31.12.2019
ex 3901 10 10
30
Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with:
not more than 5 % by weight of comonomer,
a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min, and
a density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3
0 %
31.12.2018
*ex 3901 90 90
60
Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with:
more than 5 %, but not more than 8 % by weight of comonomer,
a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min, and
a density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3
0 %
31.12.2018
*ex 3903 19 00
40
Crystalline polystyrene with:
a melting point of 268 °C or more but not more than 272 °C, and
a setting point of 232 °C or more but not more than 247 °C,
whether or not containing additives and filling material
0 %
31.12.2016
ex 3903 90 90
45
Preparation, in form of powder, containing by weight:
86 % or more but not more than 90 % of styrene-acrylic-copolymer and
9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)
0 %
31.12.2019
ex 3903 90 90
55
Preparation, in form of an aqueous suspension, containing by weight:
25 % or more but not more than 26 % of styrene-acrylic-copolymer and
5 % or more but not more than 6 % of glycol
0 %
31.12.2019
ex 3908 90 00
70
Copolymer containing:
1,3-benzenedimethanamine (CAS RN 1477-55-0) and
adipic acid (CAS RN 124-04-9),
whether or not containing isophthalic acid (CAS RN 121-91-5)
0 %
31.12.2019
ex 3911 90 19
60
Formaldehyde, polymer with 1,3-dimethylbenzene and tert-butyl-phenol (CAS RN 60806-48-6)
0 %
31.12.2019
ex 3911 90 19
70
Preparation containing:
cyanic acid, C,C′-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1), and
1,3-bis(4-cyanophenyl)propane (CAS RN 1156-51-0),
in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight
0 %
31.12.2019
*ex 3912 20 19
10
Nitrocellulose (CAS RN 9004-70-0)
0 %
31.12.2016
*ex 3919 10 80
ex 3919 90 00
ex 3920 61 00
57
30
30
Reflecting sheet:
of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern
covered on one or both sides with one or more layers of plastic or metallisation, and
whether or not covered on one side with a self-adhesive layer and a release sheet
0 %
31.12.2018
*ex 3919 10 80
ex 3919 90 00
67
46
Self-adhesive reflecting sheet whether or not in segmented pieces:
showing a regular pattern,
with or without an application tape layer,
consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,
whether or not containing an additional layer of polyester and an adhesive with a final release sheet
0 %
31.12.2018
*ex 3919 90 00
48
Transparent poly(vinyl chloride) film:
coated on one side with an acrylic UV-sensitive adhesive with an adhesive strength of 70 N/m or more, which is reduced upon irradiation,
with a polyester liner
with a total thickness without release liner of 78 μm or more
0 %
31.12.2019
ex 3920 10 28
30
Printed embossed film:
of polymers of ethylene
having a gravity of 0,94 g/cm3 or more
of a thickness of 0,019 mm ± 0,003 mm
with permanent graphics consisting of two different alternating designs whose individual length is 525 mm or more
0 %
31.12.2019
*ex 3920 62 19
60
Poly(ethylene terephtalate) film:
of a thickness of not more than 20 μm,
coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2 μm
0 %
31.12.2017
ex 3920 69 00
50
Monolayer, biaxially oriented film:
composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc,
having a thickness of 20 μm or more but not more than 120 μm
biodegradable and compostable (as determined by the method EN 13432)
0 %
31.12.2019
ex 3920 69 00
60
Monolayer, transverse oriented, shrink film:
composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid),
having a thickness of 45 μm or more but not more than 50 μm,
biodegradable and compostable (as determined by the method EN 13432)
0 %
31.12.2019
ex 3920 79 10
10
Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm
0 %
31.12.2019
ex 3920 99 28
65
Matt, thermoplastic polyurethane foil in rolls with:
a width of 1 640 mm (± 10 mm),
a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457),
a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),
a thickness of more than 365 μm but not more than 760 μm,
a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)),
an elongation to break of 470 % (as determined by the method: EN ISO 527)
0 %
31.12.2019
ex 3920 99 28
75
Thermoplastic polyurethane foil in rolls with:
a width of more than 900 mm but not more than 1 016 mm,
a matt finish,
a thickness of 0,43 mm (± 0,03 mm),
an elongation to break of 420 % or more but not more than 520 %,
a tensile strength of 55 N/mm2 (± 3) (as determined by the method EN ISO 527)
a hardness of 90 (± 4) (as determined by the method: Shore A [ASTM D2240]),
wrinkle inside (waves) of 6,35 mm,
a flatness of 0,025 mm
0 %
31.12.2019
ex 3921 90 60
30
Heat-, infra- and UV insulating poly(vinyl butyral) film:
laminated with a metal layer with a thickness of 0,05 mm (± 0,01 mm),
containing by weight 29,75 % or more but not more than 40,25 % of triethyleneglycol di (2-ethyl hexanoate) as plasticizer,
with a light transmission of 70 % or more (as determined by the ISO 9050 standard),
with an UV transmission of 1 % or less (as determined by the ISO 9050 standard),
with a total thickness of 0,43 mm (± 0,043 mm)
0 %
31.12.2019
ex 6804 21 00
10
Discs:
of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,
having a self-sharpening effect by constant release of the diamonds,
suitable for abrasive cutting of wafers,
whether or not containing a hole in the centre,
whether or not on a support
0 %
31.12.2019
ex 7409 11 00
ex 7409 19 00
ex 7410 11 00
10
10
20
Refined copper foil and strips of a thickness of not more than 400 μm
0 %
31.12.2019
*ex 7606 12 92
ex 7607 11 90
30
50
Aluminium and magnesium alloy strip or foil:
in rolls,
of a thickness of 0,14 mm or more but not more than 0,40 mm,
a width of 12,5 mm or more but not more than 359 mm,
a tensile strength of 285 N/mm2 or more, and
an elongation at break of 1 % or more, and
containing by weight:
93,3 % or more of aluminium,
0,8 % or more but not more than 5 % of magnesium, and
not more than 1,8 % of other elements
0 %
31.12.2017
*ex 7607 11 90
60
Plain aluminium foil with the following parameters:
an aluminium content of 99,98 % or more,
a thickness of 0,070 mm or more but not more than 0,125 mm,
with a cubic texture,
of a kind used for high voltage etching
0 %
31.12.2016
ex 7616 99 10
30
Aluminium engine bracket, with dimensions of:
height of more than 10 mm but not more than 200 mm,
width of more than 10 mm but not more than 200 mm,
length of more than 10 mm but not more than 200 mm,
equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:
internal porosity not more than 1 mm,
outer porosity not more than 2 mm,
Rockwell hardness HRB 10 or more,
of a kind used in the production of suspensions systems for engines in motor vehicles
0 %
31.12.2019
*ex 8108 90 30
50
Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928, 4965 and 4967
0 %
31.12.2015
ex 8108 90 50
80
Plates, sheets, strips and foil of non-alloyed titanium:
of a width of more than 750 mm,
of a thickness of not more than 3 mm
0 %
31.12.2019
ex 8108 90 50
85
Strip or foil of non-alloyed titanium:
containing more than 0,07 % by weight of oxygen (O2),
of a thickness of 0,4 mm or more but not more than 2,5 mm,
conforming to the Vickers hardness HV1 standard of not more than 170,
of a kind used in the manufacture of welded tubes for nuclear power plant condensers
0 %
31.12.2019
ex 8409 99 00
ex 8411 99 00
30
70
Spiral-shaped gas turbine turbocharger component:
with a heat-resistance of not more than 1 050 °C,
with a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm,
whether or not with an engine exhaust manifold
0 %
31.12.2018
ex 8411 99 00
60
Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:
of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686,
with a heat-resistance of not more than 1 100 °C,
with a diameter of 30 mm or more, but not more than 100 mm,
with a height of 20 mm or more, but not more than 70 mm
0 %
31.12.2017
ex 8479 89 97
70
Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy
0 %
31.12.2019
ex 8479 89 97
80
Machinery for the production of a sub assembled component (anode conductor and the negative closing cap) for the manufacture of AA and/or AAA alkaline batteries2
0 %
31.12.2019
*ex 8483 30 38
40
Cylindrical bearing housing:
of precision-cast grey cast iron complying with standard DIN EN 1561,
with oil chambers,
without bearings,
with a diameter of 50 mm or more, but not more than 250 mm,
with a height of 40 mm or more, but not more than 150 mm,
whether or not with water chambers and connectors
0 %
31.12.2017
ex 8501 32 00
ex 8501 33 00
60
15
Traction motor, with:
a torque output of 200 Nm or more but not more than 300 Nm,
a power output of 50 kW or more but not more than 100 kW,
a speed of not more than 12 500 rpm,
for use in the manufacture of electric vehicles2
0 %
31.12.2019
ex 8504 40 88
30
DC to AC inverter for use in traction motor control for use in the manufacture of electric vehicles2
0 %
31.12.2019
ex 8504 40 90
80
Power converter containing:
a DC to DC converter,
a charger of a capacity of not more than 7 kW,
switching functions,
for use in the manufacture of electric vehicles2
0 %
31.12.2019
ex 8505 90 20
30
Coil for an electromagnetic valve, with:
a plunger,
a diameter of 12,9 mm (± 0,1),
a height without plunger of 20,5 mm (± 0,1),
an electric cable with connector, and
in a cylindrical metal housing
0 %
31.12.2019
*ex 8507 10 20
30
Lead-acid accumulators or modules, of a kind used for starting piston engines, with:
a nominal capacity of not more 32 Ah,
a length of not more than 205 mm,
a width of not more than 130 mm and
a height of not more than 190 mm,
for use in the manufacture of articles of CN code 87112
0 %
31.12.2018
*ex 8507 60 00
85
Rectangular modules for incorporation in lithium-ion rechargeable batteries:
of a length of 312 mm or more, but not more than 350 mm,
of a width of 79,8 mm or more, but not more than 225 mm,
of a height of 35 mm or more, but not more than 168 mm,
of a weight of 3,95 kg or more, but not more than 8,56 kg,
with a rating of 66,6 Ah or more, but not more than 129 Ah
0 %
31.12.2015
ex 8507 60 00
87
Lithium-ion rechargeable batteries, with:
a length of 1 475 mm or more, but not more than 2 820 mm,
a width of 935 mm or more, but not more than 1 660 mm,
a height of 260 mm or more, but not more than 600 mm,
a weight of 320 kg or more, but not more than 700 kg,
a nominal capacity of 18,4 Ah or more, but not more than 130 Ah,
put up in packs of 12 or 16 modules
0 %
31.12.2017
*ex 8511 30 00
30
Igniter integrated coil assembly with:
an igniter,
a coil on plug assembly with an integrated mounting bracket,
a housing,
a length of 90 mm or more but not more than 200 mm (± 5 mm),
an operating temperature of – 40 °C or more but not more than 130 °C,
a voltage of 10,5 V or more, but not more than 16 V
0 %
31.12.2019
ex 8512 20 00
10
Fog lamps with galvanised inner surface, containing:
plastic holder with four or more brackets,
one or more, but not more than two 12 V bulbs,
connection cable with a connector,
plastic cover,
for use in the manufacture of goods of Chapter 872
0 %
31.12.2019
ex 8512 20 00
20
Information screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12 V or more, but not more than 14,4 V, of a kind used in the manufacture of goods of Chapter 87
0 %
31.12.2019
ex 8512 30 90
10
Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising:
coil,
magnet,
metal membrane,
connector,
holder,
of a kind used in the manufacture of goods of Chapter 87
0 %
31.12.2019
ex 8512 90 90
10
Ultrasonic parking sensor with:
printed circuit board inside the housing and sensor cell on the cover connected through terminal pins,
an operating voltage of not more than 12 V,
ability to receive and transmit signals processed by the control unit,
of a kind used in the manufacture of goods of Chapter 87
0 %
31.12.2019
ex 8514 20 80
ex 8516 50 00
ex 8516 60 80
10
10
10
Cavity assembly comprising at least:
a transformer with an input of not more than 240 V and an output of not more than 3 000 W,
an AC or DC fan motor with an output of not more than 42 watts,
a housing made of stainless steel,
with or without a magnetron of a microwave output power of not more than 900 W.
for use in the manufacture of built-in products of CN codes 8514 20 80, 8516 50 00 and 8516 60 802
0 %
31.12.2019
ex 8516 90 00
80
Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of CN codes 8514 20 80, 8516 50 00 and 8516 60 802
0 %
31.12.2019
ex 8518 90 00
80
Integrated car loudspeaker housing, consisting of:
a speaker frame and magnet system holder with a protective coating and
an embossed anti-dust cloth
0 %
31.12.2019
*ex 8525 80 19
60
Image scanning cameras, using:
a “Dynamic”- or “Static overlay lines” system,
an output NTSC video signal,
a voltage of 6,5 V or more,
an illuminance of 0,5 lux or more
0 %
31.12.2019
*ex 8527 91 99
ex 8529 90 65
20
85
Assembly consisting of at least:
an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator,
a transformer and
a radio broadcast receiver
for use in the manufacture of consumer electronic products2
0 %
31.12.2019
ex 8529 10 80
70
Ceramic filters:
with an applicable frequency range of 10 kHz or more but no more than 100 MHz,
with a housing of ceramic plates provided with electrodes,
of a kind used in electrical-mechanical transducer or resonator in audio visual and communication equipment
0 %
31.12.2019
ex 8529 90 65
80
Tuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading 85272
0 %
31.12.2019
*ex 8529 90 92
ex 8548 90 90
15
60
LCD modules:
solely consisting of one or more TFT glass or plastic cells,
not combined with touch screen facilities,
with one or more printed circuits boards with control electronics for pixel addressing only,
with or without backlight unit and
with or without inverters
0 %
31.12.2018
ex 8537 10 99
40
Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of:
a length of 50 mm or more, but not more than 120 mm,
a width of 20 mm or more but not more than 40 mm,
a height of 30 mm or more, but not more than 120 mm,
of a kind used in the manufacture of goods of Chapter 87
0 %
31.12.2019
ex 8537 10 99
50
Electronic control unit BCM (Body Control Module) comprising:
plastic box with printed circuit board and metal holder,
with voltage of 9 V or more, but not more than 16 V,
able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder,
of a kind used in the manufacture of goods of Chapter 87
0 %
31.12.2019
ex 8537 10 99
60
Electronic assembly consisting of:
a microprocessor,
light-emitting diode (LED) or liquid crystal display (LCD) indicators,
electronic components mounted on a printed circuit,
for use in the manufacture of built-in products of CN codes 8514 20 80, 8516 50 00 and 8516 60 802
0 %
31.12.2019
ex 8544 49 91
10
Insulated copper electrical wires:
with individual conductor wires of a diameter exceeding 0,51 mm,
for a voltage of not more than 1 000 V,
for use in the manufacture of automotive cable harnesses2
0 %
31.12.2019
*ex 8548 90 90
65
LCD modules:
solely consisting of one or more TFT glass or plastic cells,
combined with touch screen facilities,
with one or more printed circuits boards with control electronics for pixel addressing only,
with or without backlight unit and
with or without inverters
0 %
31.12.2018
ex 8708 30 10
10
Brake unit assembly comprising
electric control brake,
stroke sensor,
VDC (vehicle dynamic control) and
backup power source,
for use in the manufacture of vehicles2
0 %
31.12.2019
ex 8708 30 91
20
Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 872
0 %
31.12.2019
ex 8708 30 91
30
Body of disc type brake in BIR (“Ball in Ramp”) or EPB (“Electronic Parking Brake”) version containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87
0 %
31.12.2019
ex 8708 91 35
10
Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87
0 %
31.12.2019
ex 8708 94 35
20
Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87
0 %
31.12.2019
ex 9002 11 00
80
Lens assembly with:
a field of view range of 58,5 deg or more, but not more than 194 deg,
a focal length of 1,16 mm or more, but not more than 3,88 mm,
a relative aperture of F/2.0 or more but not more than 2.6,
a diameter of 17 mm or more but not more than 18,5 mm,
for use in the manufacture of CMOS automotive cameras2
0 %
31.12.2019
ex 9029 10 00
30
Speed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped with plastic housing and attached to connecting cable with a joining connector and mounting holders of a kind used in the manufacture of goods of Chapter 87
0 %
31.12.2019
ex 9029 20 31
ex 9029 90 00
10
20
Clustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least:
speed,
engine revolutions,
engine temperature,
the fuel level
communicating via CAN-BUS and K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87
0 %
31.12.2019
ex 9031 80 34
50
Programmable dual linear Hall sensor:
consisting of two non-electrically connected integrated circuits, a top die and a bottom die,
positioned on the top and bottom of a lead frame,
in a semiconductor housing,
for use as a means for measuring angles, positions and currents in cars
0 %
31.12.2019
ex 9031 80 38
50
Gyroscopic sensor for measuring lateral acceleration of the vehicle vertical axis comprising:
a piezoelectric crystal for generating an electrical potential during deformation and
a plastic box with metal holder,
of a kind used in the manufacture of goods of Chapter 87
0 %
31.12.2019
ex 9031 80 38
60
Congestion sensor, printed circuit board and connector, moulded together in plastic, for monitoring congestion “G” and providing the values for further evaluation of triggering the airbags, of a kind used in the manufacture of goods of Chapter 87
0 %
31.12.2019
ex 9031 80 98
30
Functional Test Machine for calibrating and image quality testing lenses in automotive cameras
0 %
31.12.2019
- (c)
the rows for the products with the following CN and TARIC codes are deleted:
CN code
TARIC
‘ex 2009 89 73
11
ex 2009 89 73
13
ex 2009 89 99
93
ex 2207 20 00
20
ex 2207 20 00
80
ex 2818 10 91
10
ex 2915 90 70
40
ex 2921 45 00
10
ex 2927 00 00
15
ex 2932 99 00
35
ex 2934 99 90
33
ex 3204 20 00
40
ex 3811 21 00
43
ex 3811 21 00
53
ex 3820 00 00
20
ex 3824 90 92
52
ex 3901 10 10
10
ex 3901 10 10
20
ex 3901 90 90
30
ex 3901 90 90
40
ex 3901 90 90
50
ex 3903 19 00
30
ex 3912 20 11
10
ex 3919 10 80
21
ex 3919 10 80
65
ex 3919 90 00
21
ex 3919 90 00
37
ex 3919 90 00
57
ex 3920 61 00
20
ex 3920 62 19
81
ex 7606 12 92
20
ex 7607 11 90
10
ex 7607 11 90
20
ex 8108 90 30
30
ex 8411 99 00
30
ex 8411 99 00
40
ex 8483 30 38
30
ex 8504 50 95
60
ex 8507 10 20
85
ex 8507 60 00
35
ex 8507 60 00
70
ex 8511 30 00
20
ex 8525 80 19
35
ex 8527 21 59
10
ex 8527 29 00
20
ex 8527 29 00
30
ex 8527 91 99
10
ex 8529 90 65
35
ex 8529 90 92
44
ex 8543 70 90
13
ex 8543 70 90
23
ex 8548 90 90
47
ex 8548 90 90
49
ex 8548 90 90
55
ex 9405 40 39
50
ex 9405 40 39
60
ex 9405 40 99
03
ex 9405 40 99
06’
- (a)
- (2)
Annex II is amended as follows:
- (a)
the following rows for the supplementary units with the CN and TARIC codes are added:
CN
TARIC
SUPPLEMENTARY UNIT
‘9031 80 34
50
1 000 p/st
8544 49 91
10
m
3901 10 10
30
m3
3901 90 90
60
m3
3920 99 28
65
m2
3920 99 28
75
m2
3921 90 60
30
m2
3903 90 90
45
m3
3920 79 10
10
p/st
6804 21 00
10
p/st
7616 99 10
30
p/st
8409 99 00
30
p/st
8411 99 00
60
p/st
8411 99 00
70
p/st
8479 89 97
70
p/st
8479 89 97
80
p/st
8483 30 38
40
p/st
8504 40 88
30
p/st
8504 40 90
80
p/st
8505 90 20
30
p/st
8511 30 00
30
p/st
8512 20 00
10
p/st
8512 20 00
20
p/st
8512 30 90
10
p/st
8512 90 90
10
p/st
8514 20 80
10
p/st
8516 90 00
80
p/st
8518 90 00
80
p/st
8529 10 80
70
p/st
8529 90 65
80
p/st
8529 90 92
15
p/st
8537 10 99
40
p/st
8537 10 99
50
p/st
8537 10 99
60
p/st
8548 90 90
60
p/st
8548 90 90
65
p/st
8708 30 10
10
p/st
8708 30 91
20
p/st
8708 30 91
30
p/st
8708 91 35
10
p/st
8708 94 35
20
p/st
9029 10 00
30
p/st
9029 20 31
10
p/st
9029 90 00
20
p/st
9031 80 38
50
p/st
9031 80 38
60
p/st
9031 80 98
30
p/st’
- (b)
the following rows for the supplementary units with the CN and TARIC codes are deleted:
CN
TARIC
SUPPLEMENTARY UNIT
‘3901 10 10
10
m3
3901 90 90
30
m3
8411 99 00
30
p/st
8411 99 00
40
p/st
8483 30 38
30
p/st
8504 50 95
60
p/st
8511 30 00
20
p/st
8527 29 00
30
p/st
8529 90 92
44
p/st
8543 70 90
13
p/st
8543 70 90
23
p/st
8548 90 90
47
p/st
8548 90 90
49
p/st
8548 90 90
55
p/st
9405 40 39
50
p/st
9405 40 99
03
p/st
9405 40 99
06
p/st’
- (a)