This Regulation provides for the implementing measures referred to in Article 68 of Regulation (EU) No 167/2013 to establish uniform conditions for the implementation of the administrative requirements for the approval of new agricultural and forestry vehicles, as well as systems, components and separate technical units designed and constructed for such vehicles and for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of systems that are essential for the safety of the vehicle of for its environmental performance.

Manufacturers applying for EU type-approval shall provide the information document and the information folder referred to in Article 22(1) and Article 22(2)(a) of Regulation (EU) No 167/2013 on the basis of the template set out in Annex I to this Regulation.

Manufacturers concerned by Article 53(1) of Regulation (EU) No 167/2013 applying for EU type-approval shall provide the approval authority with a certificate on access to vehicle OBD and vehicle repair and maintenance information in accordance with Article 53(8) of that Regulation on the basis of the template set out in Annex II to this Regulation.

Manufacturers shall issue the certificate of conformity referred to in Article 33(1) of Regulation (EU) No 167/2013 in accordance with the templates set out in Annex III to this Regulation.

Manufacturers shall issue the statutory plate and the EU type-approval mark referred to in Article 34(1) and (2) of Regulation (EU) No 167/2013 in accordance with the models set out in Annex IV to this Regulation.

Approval authorities shall issue the EU type-approval certificates referred to in Article 25(1) of Regulation (EU) No 167/2013 in accordance with the templates set out in Annex V to this Regulation.

EU type-approval certificates shall be numbered in accordance with Annex VI.

Approval authorities shall issue the test results sheet referred to in Article 25(3)(a) of Regulation (EU) No 167/2013 in accordance with the template set out in Annex VII to this Regulation.

The list of parts or equipment which may pose a serious risk to the correct functioning of systems that are essential for the safety of the vehicle or for its environmental performance referred to in Article 45(2) of Regulation (EU) No 167/2013 is set out in Annex IX to this Regulation.

Approval authorities shall issue the certificate for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of systems that are essential for the safety of the vehicle or for its environmental performance referred to in Article 46(2) of Regulation (EU) No 167/2013 in accordance with the template set out in Annex X to this Regulation.

Certificates for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of systems that are essential for the safety of the vehicle or for its environmental performance shall be numbered in accordance with Annex XI.

With respect to engines type-approved before 1 January 2018 , or before 1 January 2019 in the case of engines of sub-categories NRE-v-5 and NRE-c-5, the following provisions of this Regulation, in its version applicable on 6 August 2018 , shall continue to apply:

• Annex I, Part A;

• Annex I, Part B, point 4.2.;

• Annex I, Part B, point 5, entries 2.2.2., 2.5. to 2.5.4.2., 5.2. to 5.5. and 6. to 8.22.4.2.;

• Annex I, Appendices 1 to 9;

• Annex I, Appendix 10, entry 2.2.2.;

• Annex I, Appendices 11 to 14;

• Annex I, Appendix 15, entry 2.2.2.;

• Annex I, Appendices 16 to 23;

• Annex I, explanatory notes relating to the information document (6), (7), (9), (12), (24), (26), (29), (39), (40), (49) and (56);

• Annex II, point 2.1.1.;

• Annex II, explanatory note relating to Annex II (4);

• Annex III, Appendix 1, Model 1 of Section 2, the entries under the heading ‘ General powertrain characteristics ’ ;

• Annex III, Appendix 1, Model 1 of Section 2, the entries under the heading ‘ Engine ’ ;

• Annex III, Appendix 1, Model 1 of Section 2, the text under the heading ‘ Results of exhaust emission tests (inclusive of Deterioration Factor) ’ , the second and fourth indents of the first paragraph;

• Annex III, Appendix 1, Model 1 of Section 2, the text under the heading ‘ Results of exhaust emission tests (inclusive of Deterioration Factor) ’ , the table;

• Annex III, Appendix 1, explanatory notes relating to Appendix 1, with the exception of explanatory note (32);

• Annex IV;

• Annex V, Appendix 2, explanatory notes relating to Appendix 2;

• Annex V, Appendix 4;

• Annex V, Appendix 5;

• Annex VII, Appendix 1, with the exception of point 1. and the first indent of the text under point 2.;

• Annex VIII, with the exception of point 3.2., table 8-1, second row.

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 January 2016.