ANNEX I Amendment to Annex III of Regulation (EC) No 245/2009
1.In Annex III, point 1.2 (B) the last paragraph is replaced by the following:
‘High pressure sodium lamps with lamp efficacy requirements shall have at least the lamp lumen maintenance factors and lamp survival factors in Table 13:
Table 13
Lamp lumen maintenance factors & lamp survival factors for high pressure sodium lamps — Stage 2
| High pressure sodium lamp category and burning hours for measurement | Lamp lumen maintenance factor | Lamp survival factor | |
|---|---|---|---|
| P ≤ 75 W LLMF and LSF measured at 12 000 burning hours | Ra ≤ 60 | > 0,80 | > 0,90 |
| Ra > 60 | > 0,75 | > 0,75 | |
| all retrofit lamps designed to operate on high pressure mercury vapour lamp ballast | > 0,75 | > 0,80 | |
| P > 75 W ≤ 605 W LLMF and LSF measured at 16 000 burning hours | Ra ≤ 60 | > 0,85 | > 0,90 |
| Ra > 60 | > 0,70 | > 0,65 | |
| all retrofit lamps designed to operate on high pressure mercury vapour lamp ballast | > 0,75 | > 0,55 | |
The requirements in Table 13 for retrofit lamps designed to operate on high pressure mercury vapour lamp ballast shall be applicable until 6 years after the entry into force of this Regulation.’
2.In Annex III, point 1.2 (C) is replaced by the following:
‘C. Third stage requirements
Eight years after the entry into force of this Regulation:
Metal halide lamps with lamp efficacy requirements shall have at least the lamp lumen maintenance factors and lamp survival factors in Table 14:
Table 14
Lamp lumen maintenance factors and lamp survival factors for metal halide lamps — Stage 3
| Burning Hours | Lamp lumen maintenance factor | Lamp survival factor |
|---|---|---|
| 12 000 | > 0,80 | > 0,80’ |