The following information shall be included in the label:supplier's name or trade mark;supplier's model identifier;the energy efficiency class, determined in accordance with point 1 of Annex II; the head of the arrow containing the energy efficiency class of the local space heater shall be placed at the same height as the head of the relevant energy efficiency class;the symbol for direct heat output;the direct heat output in kW, rounded to the nearest one decimal place;for local space heaters with heat transfer to a fluid, the symbol for indirect heat output;for local space heaters with heat transfer to a fluid, the indirect heat output in kW, rounded to the nearest one decimal place.The design aspects of the label for local space heaters shall be in accordance with point 2 of this Annex.

Whereby:

The label shall be at least 105 mm wide and 200 mm high. Where the label is printed in a larger format, its content shall nevertheless remain proportionate to the specifications above.The background shall be white.Colours are coded as CMYK — cyan, magenta, yellow and black, following this example: 00-70-X-00: 0 % cyan, 70 % magenta, 100 % yellow, 0 % black.The label shall fulfil all of the following requirements (numbers refer to the figure above):EU label border stroke: 4 pt, colour: cyan 100 %, round corners: 3,5 mm.UK flag: colours—the blue background: 100,72,00,18.5;the red crosses: 00,100,81,4the remaining part: 100% white;Energy label: Colour: X-00-00-00. Pictogram as depicted: UK flag + energy label: width: 86 mm, height: 17 mm.Sub-logos border: 1 pt, colour: cyan 100 %, length: 86 mm.Scale of energy classesArrow: height: 6 mm, gap: 1,3 mm, colours:Highest class: X-00-X-00,Second class: 70-00-X-00,Third class: 30-00-X-00,Fourth class: 00-00-X-00,Fifth class: 00-30-X-00,Sixth class: 00-70-X-00,Seventh class: 00-X-X-00,Eighth class: 00-X-X-00,Last class: 00-X-X-00,Text: Calibri bold 14 pt, capitals, white, ‘+’ symbols: superscript, aligned on a single row;Energy efficiency class:Arrow: width: 22 mm, height: 12 mm, 100 % black,Text: Calibri bold 24 pt, capitals, white, ‘+’ symbols: superscript, aligned on a single row.Direct heating functionality:Pictogram as depicted,Border: 2 pt, colour: cyan 100 %, round corners: 3,5 mm.If applicable, indirect heating functionality:Pictogram as depicted,Border: 2 pt, colour: cyan 100 %, round corners: 3,5 mm.Nominal direct heat output:Border: 2 pt, colour: cyan 100 %, round corners: 3,5 mm,Value ‘XY,Z’: Calibri bold 34 pt, 100 % black,Text ‘kW’: Calibri regular 18 pt, 100 % black.If applicable, nominal indirect heat output:Border: 2 pt, colour: cyan 100 %, round corners: 3,5 mm,Value ‘XY,Z’: Calibri bold 34 pt, 100 % black,Text ‘kW’: Calibri regular 18 pt, 100 % black.Energy:Text: Calibri regular 8 pt, 100 % black.Year of label introduction and number of Regulation:Text: Calibri bold 10 pt.Supplier's name or trademark.Supplier's model identifier:The supplier's name or trade mark and model identifier shall fit in a space of 86 × 12 mm.

supplier's name or trademark; supplier's model identifier; the energy efficiency class of the model, determined in accordance with point 1 of Annex II; the direct heat output in kW, rounded to the nearest one decimal place; the indirect heat output in kW, rounded to the nearest one decimal place; the energy efficiency index, rounded to the nearest integer and calculated in accordance with Annex VIII; the useful energy efficiency at nominal heat output, and at minimum load if applicable, rounded to the nearest one decimal place and calculated in accordance with Annex VIII; any specific precautions that shall be taken when the local space heater is assembled, installed or maintained.

One fiche may cover a number of local space heater models supplied by the same supplier.

The information contained in the fiche may be given in the form of a copy of the label, either in colour or in black and white. Where this is the case, the information listed in point 1 not already displayed on the label shall also be provided.

the energy efficiency class of the model, determined in accordance with point 1 of Annex II; the direct heat output in kW, rounded to the nearest one decimal place; the indirect heat output in kW, rounded to the nearest one decimal place.

The size and font in which the information referred in point 1 is printed or shown shall be legible.

‘display mechanism’ means any screen, including tactile screen, or other visual technology used for displaying internet content to users;‘nested display’ means visual interface where an image or data set is accessed by a mouse click, mouse roll-over or tactile screen expansion of another image or data set;‘tactile screen’ means a screen responding to touch, such as that of a tablet computer, slate computer or a smartphone;‘alternative text’ means text provided as an alternative to a graphic allowing information to be presented in non-graphical form where display devices cannot render the graphic or as an aid to accessibility such as input to voice synthesis applications.

The appropriate label made available by suppliers in accordance with Article 3(1)(b) or Article 3(2)(b) shall be shown on the display mechanism in proximity to the price of the product. The size shall be such that the label is clearly visible and legible and shall be proportionate to the size specified in point 2 of Annex III. The label may be displayed using a nested display, in which case the image used for accessing the label shall comply with the specifications laid down in point 3 of this Annex. If nested display is applied, the label shall appear on the first mouse click, mouse roll-over or tactile screen expansion on the image.

be an arrow in the colour corresponding to the energy efficiency class of the product on the label; indicate on the arrow the energy efficiency class of the product in white in a font size equivalent to that of the price; and have one of the following two formats:

the image referred to in point 3 of this Annex shall be shown on the display mechanism in proximity to the price of the product; the image shall link to the label; the label shall be displayed after a mouse click, mouse roll-over or tactile screen expansion on the image; the label shall be displayed by pop up, new tab, new page or inset screen display; for magnification of the label on tactile screens, the device conventions for tactile magnification shall apply; the label shall cease to be displayed by means of a close option or other standard closing mechanism; the alternative text for the graphic, to be displayed on failure to display the label, shall be the energy efficiency class of the product in a font size equivalent to that of the price.

The appropriate product fiche made available by suppliers in accordance with Article 3(1)(d) or Article 3(2)(d) shall be shown on the display mechanism in proximity to the price of the product. The size shall be such that the product fiche is clearly visible and legible. The product fiche may be displayed using a nested display, in which case the link used for accessing the fiche shall clearly and legibly indicate ‘Product fiche’. If nested display is used, the product fiche shall appear on the first mouse click, mouse roll-over or tactile screen expansion on the link.

For the purposes of compliance and verification of compliance with the requirements of this Regulation, measurements and calculations shall be made using designated standards, or using other reliable, accurate and reproducible methods that take into account the generally recognised state-of-the-art methods. They shall meet the conditions set out in points 2 to 4.

Local space heaters shall be tested for the preferred fuel in order to determine the energy efficiency index, direct and indirect heat output. Declared values for direct and indirect heat output, and energy efficiency index, shall be rounded to the nearest one decimal place.

The useful efficiency values ηth,nom , ηth,min and the direct and indirect heat output values for Pnom , Pmin are measured, where applicable. The energy efficiency index (EEI) shall be calculated as the seasonal space heating energy efficiency in active mode (ηS,on ) corrected for local space heaters using biomass as preferred fuel by a factor taking into account the renewable character of the preferred fuel, and corrected by contributions accounting for temperature controls, auxiliary electricity consumption and permanent pilot flame energy consumption. The energy efficiency index (EEI) is expressed as a figure equivalent to its figure expressed in percentage.

The energy efficiency index (EEI) of all local space heaters is defined as: $\mathrm{EEI}=\left({\eta }_{\mathrm{S,on}}\times \mathrm{BLF}\right)-\mathrm{10\; \%}+F\left(2\right)+F\left(3\right)-F\left(4\right)-F\left(5\right)$ Where ηS,on is the seasonal space heating energy efficiency in active mode, expressed in %, calculated as set out in point 4(b), BLF is the biomass label factor, which is 1,45 for biomass local space heaters and 1 for fossil fuel local space heaters, F(2) is a correction factor accounting for a positive contribution to the energy efficiency index due to adjusted contributions of controls of indoor heating comfort, the values of which are mutually exclusive, cannot be added on top of each other, expressed in %, F(3) is a correction factor accounting for a positive contribution to the energy efficiency index due to adjusted contributions of controls for indoor heating comfort the values of which can be added on top of each other, expressed in %; F(4) is a correction factor accounting for a negative contribution to the energy efficiency index by auxiliary electricity consumption, expressed in %; F(5) is a correction factor accounting for a negative contribution to the energy efficiency index by energy consumption of a permanent pilot flame, expressed in %. The seasonal space heating energy efficiency in active mode is calculated as: ηS,on= ηth,nom Where ηth,nom is the useful efficiency at nominal heat output, based on NCV. The correction factor F(2) accounting for a positive contribution to the energy efficiency index due to adjusted contributions of controls for indoor heating comfort, the values of which are mutually exclusive or cannot be added to each other, is calculated as follows: For all local space heaters the correction factor F(2) is equal to one of the factors according to Table 4, depending on which control characteristic applies. Only one value can be selected. Correction factor F(2)

If the product is equipped with (only one option may apply):	F(2)
	Fuel fired local space heaters
single stage heat output, no room temperature control	0,0 %
two or more manual stages, no temperature control	1,0 %
with mechanic thermostat room temperature control	2,0 %
with electronic room temperature control	4,0 %
with electronic room temperature control plus day timer	6,0 %
with electronic room temperature control plus week timer	7,0 %

From 1 January 2022, F(2) shall be zero for solid fuel local space heaters with emissions, where the temperature control is set at the minimum heat output, higher than those set out in Annex II, point 2 of Commission Regulation (EU) 2015/1185. The heat output in this setting must not be higher than 50 % of the nominal heat output. From 1 January 2022, if F(2) is not zero the technical documentation shall include the relevant information on emissions at minimum heat output. The correction factor F(3) accounting for a positive contribution to the energy efficiency index due to adjusted contributions of controls for indoor heating comfort, the values of which can be added to each other, is calculated as follows: For all local space heaters the correction factor F(3) is the summation of the values according to Table 5, depending on which control characteristic(s) applies. Correction factor F(3)

If the product is equipped with (multiple options may apply):	F(3)
	Fuel fired local space heaters
room temperature control with presence detection	1,0 %
room temperature control with open window detection	1,0 %
with distance control option	1,0 %

From 1 January 2022, F(3) shall be zero for solid fuel local space heaters with emissions, where the temperature control is set at the minimum heat output, higher than those set out in Annex II, point 2 of Regulation (EU) 2015/1185. The heat output in this setting must not be higher than 50 % of the nominal heat output. From 1 January 2022, if F(3) is not zero the technical documentation shall include the relevant information on emissions at minimum heat output. The auxiliary electricity use correction factor F(4) is calculated as: This correction factor takes into account the auxiliary electricity consumption during on-mode and standby-mode operation. For all local space heaters the auxiliary electricity consumption correction is calculated as follows: $F\left(4\right)=\mathrm{CC}\times \frac{\mathrm{0,2}\times {\mathrm{el}}_{\max }+\mathrm{0,8}\times {\mathrm{el}}_{\min }+\mathrm{1,3}\times {\mathrm{el}}_{\mathrm{sb}}}{P_{\mathrm{nom}}}\times 100\left[\%\right]$ Where elmax is the electric power consumption at nominal heat output, expressed in kW; elmin is the electric power consumption at minimum heat output, expressed in kW. In case the product does not offer a minimum heat output the value for the electric power consumption at nominal heat output shall be used; elsb is the electric power consumption of the product while in standby mode, expressed in kW, Pnom is the nominal heat output of the product, expressed in kW. The correction factor F(5) related to the energy consumption of a permanent pilot flame is calculated as follows: This correction factor takes into account the permanent pilot flame power requirement. For all local space heaters the correction factor is calculated as: $F\left(5\right)=\mathrm{0,5}\times \frac{P_{\mathrm{pilot}}}{P_{\mathrm{nom}}}\times 100\left[\%\right]$ Where Ppilot is the pilot flame consumption, expressed in kW, Pnom is the nominal heat output of the product, expressed in kW.