1. Introductory Text

  2. Article 1.Subject matter and scope

  3. Article 2.Definitions

  4. Article 3.Responsibilities of suppliers and timetable

  5. Article 4.Responsibilities of dealers

  6. Article 5.Measurement and calculation methods

  7. Article 6.Verification procedure for market surveillance purposes

  8. Article 7.Review

  9. Article 8.Entry into force

  10. Signature

    1. ANNEX I

      Definitions applicable for Annexes II to IX

      1. For the purposes of Annexes II to IX the following...

      2. ‘conversion coefficient’ (CC) means a coefficient reflecting the estimated 40...

    2. ANNEX II

      Energy efficiency classes

      1. The energy efficiency class of a local space heater shall...

      2. Table 1 Energy efficiency classes of local space heaters Energy...

      3. The energy efficiency index of a local space heater shall...

    3. ANNEX III

      The label

      1. 1. Local space heaters

      2. 2. The design of the label for local space heaters shall...

    4. ANNEX IV

      Product fiche

      1. 1. The information in the product fiche of the local space...

      2. 2. One fiche may cover a number of local space heater...

      3. 3. The information contained in the fiche may be given in...

    5. ANNEX V

      Technical documentation

      1. For local space heaters, the technical documentation referred to in...

      2. the name and address of the supplier; the model identifier;...

      3. This information may be merged with the technical documentation provided...

      4. Table 2 Technical parameters for solid fuel local space heaters...

      5. Table 3 Technical parameters for gaseous/liquid fuel local space heaters...

    6. ANNEX VI

      Information to be provided in cases where end-users cannot be expected to see the product displayed, except on the internet

      1. 1. The information referred to in Article 4(1)(b) shall be provided...

      2. 2. The size and font in which the information referred in...

    7. ANNEX VII

      Information to be provided in the case of sale, hire or hire-purchase through the internet

      1. 1. For the purpose of points 2 to 5 of this...

      2. 2. The appropriate label made available by suppliers in accordance with...

      3. 3. The image used for accessing the label in the case...

      4. 4. In the case of nested display, the sequence of display...

      5. 5. The appropriate product fiche made available by suppliers in accordance...

    8. ANNEX VIII

      Measurements and calculations

      1. 1. For the purposes of compliance and verification of compliance with...

      2. 2. General conditions for measurements and calculations

      3. 3. General conditions for energy efficiency index and consumption of local...

      4. 4. Specific conditions for seasonal space heating energy efficiency

    9. ANNEX IX

      Product compliance verification by market surveillance authorities

      1. The verification tolerances set out in this Annex relate only...

      2. When verifying the compliance of a product model with the...

      3. The Great Britain authorities shall verify one single unit of...

      4. The Great Britain authorities shall use the measurement and calculation...

      5. The Great Britain authorities shall only apply the verification tolerances...

      6. Table 6 Verification tolerances Parameter Verification tolerance Energy efficiency index...