ISO 3166 alpha-2 codes with the exception of Greece and the United Kingdom for which the codes are “EL” and “UK” respectively.    ,
Member State ,,
Year,,
Data source,,
Total number of new registrations of new light commercial vehicles subject to EC type-approval,,
Total number of new registrations of individually approved new light commercial vehicles,,
Total number of new registrations of new light commercial vehicles approved as national small series,,
Total number of new registrations of new light commercial vehicles subject to multi-stage type-approval (where available),,
    Where, in the case of multi-stage vehicles, data cannot be provided for the base vehicle, the Member State shall as a minimum provide the data specified in this format for the completed vehicle. Where the vehicle identification number cannot be provided, all detailed data must be provided for the complete vehicle, the completed vehicle as well as for the base vehicle in accordance with points (a), (b) and (c) of point 1.2 of Part A of this Annex.    ,
    In the case of the national small series approvals (NSS) or the individual approvals (IVA), the manufacturer name shall be provided in the column “Manufacturer name in Member State registry” whilst in the column “Manufacturer name EU standard denomination” either of the following shall be indicated: “AA-NSS” or “AA-IVA” as the case may be.    ,
    In the case of multi-stage vehicles indicate the base (incomplete/complete) vehicle manufacturer. If the base vehicle manufacturer is not available indicate the manufacturer of the completed vehicle only.    ,
    In the case of multi-stage vehicles indicate the technically permissible maximum laden mass of the base vehicle.    ,
    In the case of multi-stage vehicles, the mass in running order and the technically permissible maximum laden mass of the base vehicle may be replaced by the default added mass specified in the type-approval information in accordance with point 2.17.2 of Annex I to Directive 2007/46/EC.    ,

(a),Manufacturer name EU standard denomination ,
  Manufacturer name OEM declaration    COMPLETE VEHICLE/BASE VEHICLE   ,
  Manufacturer name OEM declaration    COMPLETED VEHICLE   ,
Manufacturer name in Member State registry ,
(b),Type-approval number and its extension,
(c),Type,
Variant,
Version,
(d),Make,
(e),Category of vehicle type-approved,
(f),Category of vehicle registered,
(g),Specific CO 2 emissions,
(h),  Mass in running order    BASE VEHICLE  ,
  Mass in running order    COMPLETED VEHICLE/COMPLETE VEHICLE  ,
(i) ,Technically permissible maximum laden mass,
(j),Wheel base,
Axle width steering axle (Axle 1),
Axle width other axle (Axle 2),
(k),Fuel type,
Fuel mode,
(l),Engine capacity (cm 3 ),
(m),Electric energy consumption (Wh/km),
(n),Code of the innovative technology or group of innovative technologies,
Emission reduction through innovative technology(ies),
(o),Vehicle identification number,
Point 2.17.2 of Annex I to Directive 2007/46/EC ,Default added mass (where applicable in the case of multi-stage vehicles),