Commission Delegated Regulation (EU) No 3/2014 of 24 October 2013 supplementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to vehicle functional safety requirements for the approval of two- or three-wheel vehicles and quadricycles (Text with EEA relevance) (c. 3)

1. Introductory Text

2. CHAPTER I SUBJECT MATTER AND DEFINITIONS

   1. Article 1. Subject matter

   2. Article 2. Definitions

3. CHAPTER II OBLIGATIONS OF MANUFACTURERS

   1. Article 3. Fitting and demonstration requirements related to functional safety

   2. Article 4. Application of UNECE regulations

   3. Article 5. Technical specifications on functional safety requirements and test procedures

   4. Article 6. Requirements applying to audible warning devices

   5. Article 7. Requirements applying to braking, including anti-lock and combined braking systems if fitted

   6. Article 8. Requirements applying to electrical safety

   7. Article 9. Requirements applying to the manufacturers’ declaration regarding endurance testing of functional safety critical systems, parts and equipment

   8. Article 10. Requirements applying to front and rear protective structures

   9. Article 11. Requirements applying to glazing, windscreen wipers and washers, and defrosting and demisting systems

   10. Article 12. Requirements applying to driver-operated controls including identification of controls, tell-tales and indicators

   11. Article 13. Requirements applying to the installation of lighting and light signalling devices, including automatic switching of lighting

   12. Article 14. Requirements applying to rearward visibility

   13. Article 15. Requirements applying to the roll-over protective structure

   14. Article 16. Requirements applying to safety belt anchorages and safety belts

   15. Article 17. Requirements applying to seating positions (saddles and seats)

   16. Article 18. Requirements applying to steer-ability, cornering properties and turn-ability

   17. Article 19. Requirements applying to the installation of tyres

   18. Article 20. Requirements applying to the maximum vehicle speed limitation plate and its location on the vehicle

   19. Article 21. Requirements applying to vehicle occupant protection, including interior fittings and vehicle doors

   20. Article 22. Requirements applying to maximum continuous rated and/or net power and/or vehicle speed limitation by design

   21. Article 23. Requirements applying to vehicle structure integrity

4. CHAPTER III OBLIGATIONS OF THE MEMBER STATES

   1. Article 24. Type-approval of vehicles, systems, components and separate technical units

5. CHAPTER IV FINAL PROVISIONS

   1. Article 25. Entry into force

6. Signature

7. ATTACHMENTS

   1. LIST OF ANNEXES