Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Annex I or Annex II of Regulation (EU) No 517/2014. Quantities of mixtures containing those substances placed on the market shall be reported, also indicating the amounts used as components of these mixtures from other sources than own production.

	INFORMATION TO BE REPORTED			COMMENTS
1A	Total quantity of production from facilities in Great Britain
	1Aa	— thereof: Amounts not captured
		1A_a	— thereof: Amounts destroyed	If the in-line destruction is carried out by another undertaking, the latter should be specifiedReports from producers which carry out destruction on the total quantities destroyed shall be made in reporting Section 8
	AUTOMATICALLY CALCULATED QUANTITIES
	1Ab	— thereof: Total amount generated and captured		1Ab = 1A - 1Aa
	INFORMATION TO BE REPORTED
		1B	— thereof: Quantity of production from facilities in Great Britain consisting of recovered by-production or unwanted products where that by-production or those products have been destroyed in the facilities prior to the placing on the market	Reports from producers which carry out destruction on the total quantities destroyed shall be made in reporting Section 8
		1C	— thereof: Quantity of production from facilities in Great Britain consisting of recovered by-production or unwanted products where that by-production or those products have been handed over to other undertakings for destruction and had not been placed on the market previously	The undertaking carrying out the destruction shall be identified
	1C_a	— thereof: Amounts of hydrofluorocarbons produced for feedstock uses within Great Britain		The part of Great Britain where feedstock use will take place shall be indicated
		1C_a1	— thereof: Without prior capture	Only to be reported for HFC-23
	AUTOMATICALLY CALCULATED QUANTITIES
		1C_a2	— thereof: After prior capture	1C_a2 = 1C_a – 1C_a1;To be calculated only for HFC-23
	INFORMATION TO BE REPORTED
	1C_b	— thereof: Amount of hydrofluorocarbons produced for uses within Great Britain exempted under the Montreal Protocol		The type of exempted use shall be specified
	AUTOMATICALLY CALCULATED QUANTITIES
		1D	— thereof: Total quantity of own production captured and destroyed which has not been placed on the market previously	1D = 1B + 1C
1E		Production available for sale or feedstock use		1E = 1A – 1D – 1A_a

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Annex I or Annex II to Regulation (EU) No 517/2014, for mixtures containing at least one of those gases or for each gas or mixture contained in imported pre-blended polyols. For the first time for the reporting on activities in 2019, quantities of hydrofluorocarbons shall be reported separately for each country of origin, except where indicated otherwise in the table below.

Only bulk imports shall be reported here, including quantities shipped alongside equipment for the purpose of charging that equipment after import, but not quantities contained in equipment. Imports of gases contained in products or equipment shall be reported in reporting section 11. All imports shall be reported, except imports for transit through the territory of Great Britain or imports under other procedures that allow for a temporary movement of the goods on the territory of Great Britain provided that in the latter case the goods remain no longer than 45 days on the territory of Great Britain.

	INFORMATION TO BE REPORTED		COMMENTS
2A	Amount imported into Great Britain
	2B	Amount imported into Great Britain by the reporting undertaking, not released for free circulation, and re-exported contained in products or equipment by the reporting undertaking	Reporting of hydrofluorocarbons by country of origin is not necessary.Bulk gases imported for inward processing, charged into products or equipment and subsequently re-exported.Where the re-export in products or equipment (Section 2B) does not take place in the same calendar year as the import, the quantities reported in Section 2B may include re-exports in products or equipment of 1 January stocks not placed on Great Britain market as reported in Section 4CBulk gas exports shall only be reported in Section 3
	2C	Amount of used, recycled or reclaimed hydrofluorocarbons
	2D	Amount of virgin hydrofluorocarbons imported for feedstock use
	2E	Amount of virgin hydrofluorocarbons imported for uses exempted under the Montreal Protocol	The type of exempted use shall be specified
	2F	Amount of hydrofluorocarbons contained in pre-blended polyols

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Annex I or Annex II to Regulation (EU) No 517/2014, for mixtures containing at least one of those gases or for each gas or mixture contained in exported pre-blended polyols. For the first time for the reporting on activities in 2019, quantities of hydrofluorocarbons shall be reported separately for each country of destination, except where indicated otherwise in the table below.

Only exports of bulk gases, including any quantities shipped alongside equipment for the purpose of charging that equipment after export, shall be reported under this Section.

Quantities from own production or own import supplied to other undertakings in Great Britain for direct export shall be reported in reporting Section 5.

	INFORMATION TO BE REPORTED		COMMENTS
3A	Total amount exported from Great Britain
	3B	Exported amounts from own production or import	Reporting by country of destination is not necessary
AUTOMATICALLY CALCULATED QUANTITIES
	3C	Exported amount purchased from other undertakings within Great Britain	3C = 3A – 3B
INFORMATION TO BE REPORTED
	3D	Amount exported for recycling	Reporting by country of destination is not necessary
	3E	Amount exported for reclamation	Reporting by country of destination is not necessary
	3F	Amount exported for destruction	Reporting by country of destination is not necessary
	3G	Amount of used, recycled or reclaimed hydrofluorocarbons exported
	3H	Amount of virgin hydrofluorocarbons exported for feedstock use
	3I	Amount of virgin hydrofluorocarbons exported for uses exempted under the Montreal Protocol	The type of exempted use shall be specified
	3J	Amount of hydrofluorocarbons contained in pre-blended polyols

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Annex I or Annex II to Regulation (EU) No 517/2014 or for mixtures containing at least one of those gases or for each gas or mixture contained in pre-blended polyols.

	INFORMATION TO BE REPORTED			COMMENTS
4A	Total 1st January stocks
	4B	— thereof: 1 January stocks of quantities from own import or production
		4C	— thereof: 1 January stocks of quantities from own import or production, previously not placed on the market	In particular unsold own production and own imports not released for free circulation
AUTOMATICALLY CALCULATED QUANTITIES
		4D	— thereof: 1 January stocks of quantities from own import or production, previously placed on the market	In particular own imports released for free circulation4D = 4B – 4C
	4E	Other 1 January stocks		In particular from purchases within Great Britain4E = 4A – 4B
INFORMATION TO BE REPORTED
4F	Total 31st December stocks
	4G	— thereof: 31 December stocks of quantities from own import or production
		4H	— thereof: 31 December stocks of quantities from own import or production, previously not placed on the market	In particular unsold own production, own imports not released for free circulation
AUTOMATICALLY CALCULATED QUANTITIES
		4I	— thereof: 31 December stocks of quantities from own import or production, previously placed on the market	In particular own import released for free circulation4I = 4G – 4H
	4J	— thereof: Other 31 December stocks		In particular from purchases within Great Britain4J = 4F-4G
INFORMATION TO BE REPORTED
4K	Amount reclaimed by the undertaking itself
4L	Amount recycled by the undertaking itself
AUTOMATICALLY CALCULATED QUANTITIES
4M	Total amount physically placed on the market			4M = 1E + 2A – 2B – 3B + 4C – 4H

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each hydrofluorocarbon (for gases listed in Section 1 of Annex I to Regulation (EU) No 517/2014, for mixtures or pre-blended polyols containing at least one of those gases).

	INFORMATION TO BE REPORTED	COMMENTS
5A	Quantity imported into Great Britain for destruction	The undertaking/s carrying out the destruction shall be specified.Reports from importers which also carry out destruction themselves on the quantities destroyed shall be made in reporting Section 8.
5B	Quantity used by a producer or importer in feedstock applications or supplied directly by a producer or an importer to undertakings for use in feedstock applications	The feedstock using undertaking/s shall be specifiedReports from producers or importers which are also feedstock users themselves on their feedstock use shall be made in reporting section 7.
5C	Quantity supplied directly to undertakings for export out of Great Britain, where those quantities were not subsequently made available to another party within Great Britain prior to exportOn a voluntary basis, quantities supplied directly to undertakings for manufacturing of equipment in Great Britain, where such equipment is subsequently directly exported out of Great Britain	The exporting undertaking/s shall be specified. Verification documents should be provided.Only hydrofluorocarbons in bulk shall be reported, not quantities contained in products or equipment.Data on supply for the manufacturing of equipment that is directly exported may be provided for information purposes, and should specify the exporting equipment manufacturer and quantities that were exported.
5D	Quantity supplied directly for use in military equipment	The undertaking receiving the quantity for use in military equipment shall be specified.
5E	Quantity supplied directly to an undertaking using it for the etching of semiconductor material or the cleaning of chemicals vapour deposition chambers within the semiconductor manufacturing sector	The receiving semiconductor manufacturer shall be specified.
5F	Quantity supplied directly to an undertaking producing metered dose inhalers for the delivery of pharmaceutical ingredients	The receiving producer of metered dose inhalers for the delivery of pharmaceutical ingredients shall be specified.

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Annex I or Annex II to Regulation (EU) No 517/2014 or mixture containing at least one of those gases.

	INFORMATION TO BE REPORTED	COMMENTS
6A	Export	For hydrofluorocarbons, the amount reported here [6A] shall be the same amount or higher as that reported in reporting section 5 as supplied directly to undertakings for export out of Great Britain, where those quantities were not subsequently made available to any other party within Great Britain, prior to export [5C].
6B	Destruction	For hydrofluorocarbons, the amount reported here [6B] shall be the same amount or higher as that reported in reporting section 5 as imported into Great Britain for destruction [5A].
6C	Military equipment	For hydrofluorocarbons, the amount reported here [6C] shall be the same amount or higher as that reported in reporting section 5 as supplied directly for use in military equipment [5D].
6D	Refrigeration, air-conditioning and heating
6E	Other heat transfer fluids
6F	Production of foams
6G	Production of pre-blended polyols
6H	Fire protection
6I	Aerosols — medical dose inhalers	For hydrofluorocarbons, the amount reported here [6I] shall be the same amount or higher as that reported in reporting section 5 as supplied directly to an undertaking producing metered dose inhalers for the delivery of pharmaceutical ingredients [5F].
6J	Aerosols — other uses
6K	Solvents
6L	Feedstock	For hydrofluorocarbons, the amount reported here [6L] shall be the same amount or higher as that reported in reporting section 5 as used by a producer in feedstock applications or supplied directly by a producer or an importer to undertakings for use in feedstock applications [5B].
6M	Semiconductor manufacture	For hydrofluorocarbons, the amount reported here [6M] shall be the same amount or higher as that reported in reporting section 5 as supplied directly to an undertaking using it for the etching of semiconductor material or the cleaning of chemicals vapour deposition chambers within the semiconductor manufacturing sector [5E].
6N	Photovoltaics manufacture
6O	Other electronics manufacture
6P	Electrical switchgear equipment
6Q	Particle accelerators
6R	Magnesium die casting operations
6S	Anaesthetics
6T	Other or unknown application	Other application/s shall be specified, and unknown application shall be explained by the reporter.
6U	Leakage during storage, transport or transfer
6V	Accountancy adjustments	Where such quantities are reported, an explanation should be provided
AUTOMATICALLY GENERATED CALCULATIONS OF QUANTITIES
6W	Total quantities for the categories for applications	6W = 6A + 6B + 6C + 6D + 6E + 6F + 6G + 6H + 6I + 6J + 6K + 6L + 6M + 6N + 6O + 6P + 6Q + 6R + 6S + 6T + 6U + 6VIf data are reported correctly, then the total quantities for the categories of applications [6W] will correspond to the calculated total quantity supplied to Great Britain market [6X].
6X	Total quantity supplied to Great Britain market	6X = 1E + 2A – 3B + 4B – 4G + 4K

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Annex I or Annex II to Regulation (EU) No 517/2014 or mixture containing at least one of those gases.

Only quantities actually used as feedstock shall be reported here.

Where hydrofluorocarbons (gases listed in Section 1 of Annex I to Regulation (EU) No 517/2014 or mixture containing at least one of those gases) were produced or imported by the undertaking using them as the feedstock, the quantities used shall be reported in section 5 as well. Where the undertaking produced or imported those gases and subsequently sold them for use as feedstock to other undertakings, the quantities supplied shall only be reported in reporting section 5, specifying the feedstock using undertaking.

	INFORMATION TO BE REPORTED	COMMENTS
7A	Amount used as feedstock by the undertaking itself

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each fluorinated greenhouse gas listed in Annex I or Annex II to Regulation (EU) No 517/2014 or mixture containing at least one of those gases.

The total quantities destroyed by the reporting undertaking themselves are to be reported. Undertakings which are producers shall also report on the quantities of its own production which have been destroyed, in reporting section 1.

Undertakings which are importers of hydrofluorocarbons (gases listed in Section 1 of Annex I to Regulation (EU) No 517/2014 or mixture containing at least one of those gases) shall report the quantities of its imports which have been destroyed, in reporting section 5.

Quantities sent for destruction to other undertakings in Great Britain shall not be reported here. Quantities exported for destruction outside Great Britain shall be reported in 3F.

	INFORMATION TO BE REPORTED	COMMENTS
8A	Amount destroyed by the reporting company using high temperature combustion
8B	Amount destroyed by the reporting company using thermal desorption
8C	Amount destroyed by the reporting company using other technologies	The employed destruction technologies shall be specified
AUTOMATICALLY CALCULATED QUANTITIES
8D	Total amount destroyed by the undertaking itself	8D = 8A + 8B + 8C
INFORMATION TO BE REPORTED
8E	1 January stocks waiting to be destroyed
8F	31 December stocks intended for destruction waiting to be destroyed

Applicable for the first time to reporting on activities in 2015 (by 31 March 2016 at the latest).

Quantities shall be reported in tonnes of CO2 equivalents with accuracy to 1 tonne of CO2 equivalent, without distinction between different hydrofluorocarbons.

Only authorisations issued during the calendar year for which the report is submitted shall be reported.

	INFORMATION TO BE REPORTED	COMMENTS
9A	Quantities subject to authorisations to use a quota given to producers or importers of pre-charged equipment under Article 18(2) of Regulation (EU) No 517/2014	The undertaking receiving the authorisation shall be specified.

Applicable for the first time to reporting on activities in 2015 (by 31 March 2016 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each hydrofluorocarbon (gases listed in Section 1 of Annex I to Regulation (EU) No 517/2014 or mixture containing at least one of those gases).

All hydrofluorocarbon supplies linked to the authorisations issued during the calendar year for which the report is submitted, as reported under section 9, shall be reported in this reporting section. This information is needed to verify compliance with Article 18(2) of Regulation (EU) No 517/2014.

	INFORMATION TO BE REPORTED	COMMENTS
10A	Amount of gas supplied to undertakings, to which authorisations were issued for the placing on the market refrigeration, air conditioning and heat pump equipment charged with hydrofluorocarbons.	The receiving undertaking/s shall be specified.With the report, undertakings should submit additional proof for all physical supplies reported here (e.g. invoices).

Applicable for the first time to reporting on activities carried out in 2014 (by 31 March 2015 at the latest).

Quantities of fluorinated greenhouse gases listed in Annex I or Annex II to Regulation (EU) No 517/2014 or mixtures containing at least one of those gases contained in the products and equipment shall be reported in metric tonnes with accuracy to the third decimal place, by category. In addition to the total quantity of gases, the number of units shall be reported per category, unless otherwise stated.

Producers of products or equipment manufactured in Great Britain shall not report on products and equipment where the contained gases were previously imported into or produced in Great Britain. Where a producer itself produces bulk gas in Great Britain for use in Great Britain for manufacturing their products and equipment, its reporting on production (reporting section 1) would similarly cover the relevant gas amounts, so these amounts shall also not be reported in this section.

Importers of products or equipment containing a fluorinated greenhouse gas listed in Annex I or II to Regulation (EU) No 517/2014 shall report on all gas containing imports released by customs for free circulation in Great Britain. Imports of pre-blended polyols are not to be reported in this section but in section 2. Where hydrofluorocarbons (gases listed in Section 1 of Annex I to Regulation (EU) No 517/2014 or mixture containing at least one of those gases) contained in imported refrigeration, air conditioning or heat pump equipment had previously been exported from Great Britain, and had been subject to the hydrofluorocarbon quota limitation for placing on the market, that shall be reported in reporting section 12 in order to prove compliance with Article 14 of Regulation (EU) No 517/2014.

The categories of products or equipment listed below include components intended for the specified product or equipment categories.

The term ‘direct design’ refers in particular to air-to-air, water-to-air, brine-to-air systems; the term ‘indirect design’ in particular to air-to-water, water-to-water, brine-to-water systems, including hydronic heat-pumps.

		AUTOMATICALLY CALCULATED QUANTITIES	COMMENTS
11A		Stationary equipment for comfort cooling or heating	11A = 11A1 + 11A2 + 11A3 + 11A4 + 11A5 + 11A6 + 11A7 + 11A8 + 11A9 + 11A10 + 11A11 + 11A12 + 11A13 + 11A14
INFORMATION TO BE REPORTED
	11A1	Stationary equipment for comfort cooling/heating, direct design: Standalone/monobloc units of moveable type
	11A2	Stationary equipment for comfort cooling/heating, direct design: standalone/monobloc units of rooftop type
	11A3	Stationary equipment for comfort cooling/heating, direct design: standalone/monobloc units of other type	The equipment type/s shall be specified.
	11A4	Stationary equipment for comfort cooling/heating, direct design: single split units charged with 3 kilograms or more of refrigerant
	11A5	Stationary equipment for comfort cooling/heating, direct design: single split units charged with less than 3 kilograms of refrigerant
	11A6	Stationary equipment for comfort cooling/heating, direct design: multi split units
	11A7	Stationary equipment for comfort cooling/heating, indirect design: standalone/monobloc units for domestic use
	11A8	Stationary equipment for comfort cooling/heating, indirect design: standalone/monobloc units for commercial or industrial use
	11A9	Stationary equipment for comfort cooling/heating, indirect design: standalone/monobloc units for other use	The intended use/s shall be specified.
	11A10	Stationary equipment for comfort cooling/heating, indirect design: split units for domestic use
	11A11	Stationary equipment for comfort cooling/heating, indirect design: split units for commercial or industrial use
	11A12	Stationary equipment for comfort cooling/heating, indirect design: split units for other use	The intended use/s shall be specified.
	11A13	Stationary equipment for comfort cooling/heating, both direct and indirect: standalone/monobloc units
	11A14	Stationary equipment for comfort cooling/heating, both direct and indirect: split units
AUTOMATICALLY CALCULATED QUANTITIES
11B		Stationary equipment for refrigeration	11B = 11B1 + 11B2 + 11B3 + 11B4 + 11B5 + 11B6 + 11B7 + 11B8 + 11B9 + 11B10 + 11B11 + 11B12 + 11B13 + 11B14
INFORMATION TO BE REPORTED
	11B1	Stationary equipment for refrigeration, direct design: standalone/monobloc units for domestic use
	11B2	Stationary equipment for refrigeration, direct design: standalone/monobloc units for commercial or industrial use
	11B3	Stationary equipment for refrigeration, direct design: standalone/monobloc units for other use	The intended use/s shall be specified.
	11B4	Stationary equipment for refrigeration, direct design: split units for commercial or industrial use
	11B5	Stationary equipment for refrigeration, direct design: split units for other use	The intended use/s shall be specified.
	11B6	Stationary equipment for refrigeration, indirect design: standalone/monobloc units for commercial or industrial use
	11B7	Stationary equipment for refrigeration, indirect design: standalone/monobloc units for other use	The intended use/s shall be specified.
	11B8	Stationary equipment for refrigeration, indirect design: split units for commercial or industrial use
	11B9	Stationary equipment for refrigeration in indirect design: split units for other use	The intended use/s shall be specified.
	11B10	Stationary equipment for refrigeration, both direct and indirect: standalone/monobloc units
	11B11	Stationary equipment for refrigeration, both direct and indirect: split units
	11B12	Stationary equipment for process cooling or heating in direct design
	11B13	Stationary equipment for process cooling or heating in indirect design
	11B14	Stationary equipment for process cooling or heating, both direct and indirect
11C		Heat pump tumble dryers
AUTOMATICALLY CALCULATED QUANTITIES
11D		Stationary heating/air conditioning including heatpumps as well as refrigeration (HACR) equipment for any other purposes	11D = 11D1 + 11D2 + 11D3
INFORMATION TO BE REPORTED
	11D1	Stationary HACR equipment for any other purposes, direct design	The equipment type/s and purpose/s shall be specified.
	11D2	Stationary HACR equipment for any other purposes, indirect design	The equipment type/s and purpose/s shall be specified.
	11D3	Stationary HACR equipment for any other purposes, both direct and indirect	The equipment type/s and purpose/s shall be specified.
AUTOMATICALLY CALCULATED QUANTITIES
11E		Mobile refrigeration equipment	11E = 11E1 + 11E2 + 11E3 + 11E4
INFORMATION TO BE REPORTED
	11E1	Mobile refrigeration equipment for refrigerated light duty vehicles (e.g. vans)
	11E2	Mobile refrigeration equipment for refrigerated heavy duty vehicles (including trucks and trailers)
	11E3	Mobile refrigeration equipment for refrigerated ships
	11E4	Any other mobile refrigeration equipment	The equipment type/s shall be specified.
AUTOMATICALLY CALCULATED QUANTITIES
11F		Mobile air conditioning equipment	11F = 11F1 + 11F2 + 11F3 + 11F4 + 11F5 + 11F6 + 11F7 + 11F8 + 11F9
INFORMATION TO BE REPORTED
	11F1	Mobile air conditioning equipment for passenger cars
	11F2	Mobile air conditioning equipment for buses
	11F3	Mobile air conditioning equipment for vans (light duty vehicles)
	11F4	Mobile air conditioning equipment for trucks and trailers (heavy duty vehicles)
	11F5	Mobile air conditioning equipment for agricultural, forestry and construction vehicles and machinery
	11F6	Mobile air conditioning equipment for rail vehicles
	11F7	Mobile air conditioning equipment for ships
	11F8	Mobile air conditioning equipment for aircrafts and helicopters
	11F9	Any other mobile air conditioning equipment	The equipment type/s shall be specified.
AUTOMATICALLY CALCULATED VALUE
11G		Total refrigeration, air conditioning or heat pump equipment	11G = 11A + 11B + 11C + 11D + 11E + 11F
11H		Foam products	11H = 11H1 + 11H2 + 11H3 + 11H4
INFORMATION TO BE REPORTED
	11H1	Extruded polystyrene (XPS) insulation boards	Quantities of XPS boards shall be reported in units of cubic metres (next to quantities of contained fluorinated gases in units of metric tonnes)
	11H2	Polyurethane (PU) insulation boards	Quantities of PU boards shall be reported in units of cubic metres (next to quantities of contained fluorinated gases in units of metric tonnes)
	11H3	One component foam (OCF)	The measurement unit can be pieces of OCF cans (next to quantities of contained fluorinated gases in units of metric tonnes)
	11H4	Other foam products	The product category/ies shall be specified.Imports of pre-blended polyols (e.g. in foam systems/containers) shall not be reported here but rather in section 2.Quantities of foam products shall be reported in units of either cubic metres, metric tonnes, or pieces of product/equipment (next to quantities of contained fluorinated gases in units of metric tonnes)
11I		Fire protection equipment (including systems incorporated in vehicles)
11J		Medical or pharmaceutical aerosols
11K		Non-medical aerosols
11L		Medical equipment (without aerosols)
11M		Switch gear for transmission and distribution of electricity
11N		Other electrical transmission and distribution equipment
11O		Particle accelerators
11P		Other products and equipment containing gases listed in Annex I or Annex II of Regulation (EU) No 517/2014	The product or equipment category/ies shall be specified.The measurement unit can be either volume, weight or pieces of product/equipment.(next to quantities of contained fluorinated gases in units of metric tonnes)
AUTOMATICALLY CALCULATED QUANTITIES
11Q		Total of products and equipment containing fluorinates gases listed in Annex I or Annex II of Regulation (EU) No 517/2014	11Q = 11G + 11H + 11I + 11J + 11K + 11L + 11M + 11N + 11O + 11P

Applicable for the first time to reporting on activities carried out in 2017 (by 31 March 2018 at the latest).

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each hydrofluorocarbon (gases listed in Section 1 of Annex I to Regulation (EU) No 517/2014 or mixture containing at least one of those gases).

	INFORMATION TO BE REPORTED	COMMENTS
12A	Amount of hydrofluorocarbons charged into the imported equipment, released by customs for free circulation in Great Britain, for which the hydrofluorocarbons had previously been exported from Great Britain and which had been subject to the hydrofluorocarbon quota limitation for placing on Great Britain market	The hydrofluorocarbon exporting undertaking/s and the year/s of export shall be specified.The undertaking/s having placed the hydrofluorocarbons on Great Britain market for the first time and the year/s of that placing on the market shall be specified.

Applicable for the first time to reporting on activities carried out in 2018 (by 31 March 2019 at the latest) and until and including the year in which Union law ceases to apply to and in the United Kingdom.

Quantities shall be reported in metric tonnes with accuracy to the third decimal place, separately for each gas listed in Section 1 of Annex I to Regulation (EU) No 517/2014 or mixtures containing at least one of those gases or for each gas or mixture contained in pre-blended polyols.

	AUTOMATICALLY CALCULATED QUANTITIES	COMMENTS
13aA	Amount of hydrofluorocarbons physically placed on the market, excluding exempted uses	13aA = 4M – Sum of exempted uses in Section 5 (5A – 5F)
INFORMATION TO BE REPORTED
13aB	Thereof: amount placed on the United Kingdom market for the first time	Amounts placed on the United Kingdom market, but subsequently supplied to Great Britain (without United Kingdom) in bulk are not to be includedAmounts supplied to the United Kingdom market in bulk that were previously placed on Great Britain (without United Kingdom) market are to be included
AUTOMATICALLY CALCULATED QUANTITIES
13aC	Thereof: amount placed on Great Britain market, excluding the United Kingdom	13aC = 13aA – 13aB