http://www.legislation.gov.uk/eur/2013/715/article/6ACommission Regulation (EU) No 715/2013 of 25 July 2013 establishing criteria determining when copper scrap ceases to be waste under Directive 2008/98/EC of the European Parliament and of the CouncilCommission Regulation (EU) No 715/2013Commission Regulation (EU) No 715/2013 of 25 July 2013 establishing criteria determining when copper scrap ceases to be waste under Directive 2008/98/EC of the European Parliament and of the CouncilKing's Printer of Acts of Parliamenthttps://webarchive.nationalarchives.gov.uk/eu-exit/https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32013R0715texttext/xmlen2025-04-23Expert Participation2025-02-27 <Emphasis><Addition ChangeId="key-a70ba06d494f12005539df49f0ae4c2e-1727351116664" CommentaryRef="key-a70ba06d494f12005539df49f0ae4c2e">EU exit: transitional provision</Addition></Emphasis>Article 6A1.Paragraph 3 applies to verification obtained in compliance with Article 5 as it had effect immediately before IP completion day.2.Paragraph 3 also applies where—abefore IP completion day, a producer or supplier has submitted a management system to a conformity assessment body or an environmental verifier for verification in compliance with Article 5 as it had effect immediately before IP completion day, andbafter IP completion day, the producer or supplier obtains that verification.3.Where this paragraph applies, the verification obtained is deemed to be verification for the purposes of Article 5.4.In paragraph 2, “supplier” means the supplier of a producer or of an importer.Art. 6A inserted (31.12.2020) by The Waste (Miscellaneous Amendments) (EU Exit) Regulations 2019 (S.I. 2019/620), regs. 1(2)(b), 12(5) (as amended by S.I. 2020/1540, regs. 1(3), 14(8)(c)); 2020 c. 1, Sch. 5 para. 1(1)