http://www.legislation.gov.uk/eur/2013/168/chapter/IRegulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles (Text with EEA relevance)Regulation (EU) No 168/2013 of the European Parliament and of the CouncilRegulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles (Text with EEA relevance)King's Printer of Acts of Parliamenthttps://webarchive.nationalarchives.gov.uk/eu-exit/https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02013R0168-20201114texttext/xmlen2024-05-19Expert Participation2022-12-31 CHAPTER I <Strong>SUBJECT MATTER, SCOPE AND DEFINITIONS</Strong> Subject matter Article 1 1 This Regulation establishes the administrative and technical requirements for the type-approval of all new vehicles, systems, components and separate technical units referred to in Article 2(1). This Regulation does not apply to the approval of individual vehicles. However, Member States granting such individual approvals shall accept any type-approval of vehicles, systems, components and separate technical units granted under this Regulation instead of under the relevant national provisions. 2 This Regulation establishes the requirements for the market surveillance of vehicles, systems, components and separate technical units which are subject to approval in accordance with this Regulation. This Regulation also establishes the requirements for the market surveillance of parts and equipment for such vehicles. 3 This Regulation is without prejudice to the application of legislation on road safety. Scope Article 2 1 This Regulation shall apply to all two- or three-wheel vehicles and quadricycles as categorised in Article 4 and Annex I (‘L-category vehicles’), that are intended to travel on public roads, including those designed and constructed in one or more stages, and to systems, components and separate technical units, as well as parts and equipment, designed and constructed for such vehicles. This Regulation also applies to enduro motorcycles (L3e-AxE (x = 1, 2 or 3)), trial motorcycles (L3e-AxT (x = 1, 2 or 3)) and heavy all terrain quads (L7e-B) as categorised in Article 4 and Annex I. 2 This Regulation does not apply to the following vehicles: a vehicles with a maximum design speed not exceeding 6 km/h; b vehicles exclusively intended for use by the physically handicapped; c vehicles exclusively intended for pedestrian control; d vehicles exclusively intended for use in competition; e vehicles designed and constructed for use by the armed services, civil defence, fire services, forces responsible for maintaining public order and emergency medical services; f agricultural or forestry vehicles subject to Regulation (EU) No 167/2013 of the European Parliament and of the Council of 5 February 2013 on the approval and market surveillance of agricultural and forestry vehicles, machines subject to Directive 97/68/EC of the European Parliament and of the Council of 16 December 1997 on the approximation of the laws of the Member States relating to measures against the emission of gaseous and particulate pollutants from internal combustion engines to be installed in non-road mobile machinery and Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery and motor vehicles subject to Directive 2007/46/EC; g vehicles primarily intended for off-road use and designed to travel on unpaved surfaces; h pedal cycles with pedal assistance which are equipped with an auxiliary electric motor having a maximum continuous rated power of less than or equal to 250 W, where the output of the motor is cut off when the cyclist stops pedalling and is otherwise progressively reduced and finally cut off before the vehicle speed reaches 25 km/h; i self-balancing vehicles; j vehicles not equipped with at least one seating position; k vehicles equipped with any seating position of the driver or rider having an R-point height ≤ 540 mm in case of categories L1e, L3e and L4e or ≤ 400 mm in case of categories L2e, L5e, L6e and L7e. DefinitionsArticle 3For the purposes of this Regulation and the acts listed in Annex II, except as otherwise provided therein, the following definitions shall apply:‘type-approval’ means the procedure whereby an approval authority certifies that a type of vehicle, system, component or separate technical unit satisfies the relevant administrative provisions and technical requirements;‘type-approval certificate’ means the document whereby the approval authority officially certifies that a type of vehicle, system, component or separate technical unit is approved;‘whole-vehicle type-approval’ means a type-approval whereby an approval authority certifies that an incomplete, complete or completed vehicle type satisfies the relevant administrative provisions and technical requirements;‘EU type-approval’ means the procedure whereby an approval authority certifies that a type of vehicle, system, component or separate technical unit satisfies the relevant administrative provisions and technical requirements of this Regulation;‘EU type-approval certificate’ means the certificate based on the template set out in the implementing act adopted pursuant to this Regulation or the communication form set out in the relevant UNECE regulations referred to in this Regulation or the delegated acts adopted pursuant to this Regulation;‘system type-approval’ means a type-approval whereby an approval authority certifies that a system built into a vehicle of a specific type satisfies the relevant administrative provisions and technical requirements;‘separate technical unit type-approval’ means a type-approval whereby an approval authority certifies that a separate technical unit satisfies the relevant administrative provisions and technical requirements in relation to one or more specified types of vehicles;‘component type-approval’ means a type-approval whereby an approval authority certifies that a component independently of a vehicle satisfies the relevant administrative provisions and technical requirements;‘national type-approval’ means a type-approval procedure laid down by the national law of a Member State, the validity of such approval being restricted to the territory of that Member State;‘certificate of conformity’ means the document issued by the manufacturer, which certifies that a produced vehicle conforms to the approved vehicle type;‘base vehicle’ means any vehicle which is used at the initial stage of a multi-stage type-approval process;‘incomplete vehicle’ means any vehicle which must undergo at least one further stage of completion in order to meet the relevant technical requirements of this Regulation;‘completed vehicle’ means a vehicle resulting from the process of multi-stage type-approval which meets the relevant technical requirements of this Regulation;‘complete vehicle’ means any vehicle which need not be completed in order to meet the relevant technical requirements of this Regulation;‘system’ means an assembly of devices combined to perform one or more specific functions in a vehicle and which is subject to the requirements of this Regulation or any of the delegated or implementing acts adopted pursuant to this Regulation;‘component’ means a device subject to the requirements of this Regulation or any of the delegated or implementing acts adopted pursuant to this Regulation, which is intended to be part of a vehicle and which may be type-approved independently of a vehicle in accordance with this Regulation and the delegated or implementing acts adopted pursuant to this Regulation where those acts make express provision for so doing;‘separate technical unit’ means a device subject to the requirements of this Regulation or any of the delegated or implementing acts adopted pursuant to this Regulation and intended to be part of a vehicle, which may be type-approved separately, but only in relation to one or more specified types of vehicle, where those acts make express provision for so doing;‘parts’ means goods used for the assembly of a vehicle as well as spare parts;‘equipment’ means any goods other than parts which can be added to or installed on a vehicle;‘original parts or equipment’ means parts or equipment which are manufactured according to the specifications and production standards provided by the vehicle manufacturer for the production of parts or equipment for the assembly of the vehicle in question; this includes parts or equipment which are manufactured on the same production line as these parts or equipment; it is presumed, unless the contrary is proven, that parts or equipment constitute original parts or equipment if the manufacturer certifies that the parts or equipment match the quality of the components used for the assembly of the vehicle in question and have been manufactured in accordance with the specifications and production standards of the vehicle manufacturer;‘spare parts’ means goods which are to be installed in or on a vehicle so as to replace original parts of that vehicle, including goods such as lubricants which are necessary for the use of a vehicle, with the exception of fuel;‘functional safety’ means the absence of unacceptable risk of physical injury or of damage to the health of persons or to property owing to hazards caused by mal-functional behaviour of mechanical, hydraulic, pneumatic, electrical or electronic systems, components or separate technical units;‘advanced brake system’ means an anti-lock brake system, a combined brake system or both;‘anti-lock brake system’ means a system that senses wheel slip and automatically modulates the pressure producing the braking forces at the wheel(s) to limit the degree of wheel slip;‘combined brake system’ means:for vehicle categories L1e and L3e: a service brake system where at least two brakes on different wheels are operated by actuation of a single control;for vehicle category L4e: a service brake system where the brakes on at least the front and rear wheels are operated by actuation of a single control (if the rear wheel and sidecar wheel are braked by the same brake system, this is regarded as the rear brake);for vehicle categories L2e, L5e, L6e and L7e: a service brake system where the brakes on all wheels are operated by actuation of a single control;‘automatic switching-on of lighting’ means a lighting system turned on when the ignition switch or the engine on-off switch is in the on-position;‘pollution control device’ means those components of a vehicle that control or reduce tailpipe and/or evaporative emissions;‘replacement pollution control device’ means a pollution control device or an assembly of such devices that is intended to replace an original pollution control device and that can be approved as a separate technical unit;‘seating position’ means:a saddle accommodating either the driver or a passenger, which is used by sitting in an astride position; orany seat which can accommodate at the minimum a person with the size of a anthropomorphic manikin of a 50th percentile adult male, in the case of the driver;‘compression ignition engine’ or ‘CI engine’ means a combustion engine working according to the principles of the ‘Diesel’ cycle;‘positive ignition engine’ or ‘PI engine’ means a combustion engine working according to the principles of the ‘Otto’ cycle;‘hybrid vehicle’ means a powered vehicle equipped with at least two different energy converters and two different energy storage systems (on-vehicle) for the purpose of vehicle propulsion;‘hybrid electric vehicle’ means a vehicle that, for the purpose of mechanical propulsion, draws energy from both of the following on-vehicle sources of stored energy/power:a consumable fuel;a battery, capacitor, flywheel/generator or other electrical energy or power storage device.This definition also includes vehicles which draw energy from a consumable fuel only for the purpose of re-charging the electrical energy/power storage device;‘propulsion’ means a combustion engine, an electric engine, any hybrid application or a combination of those engine types or any other engine type;‘maximum continuous rated power’ means the maximum thirty minutes power at the output shaft of an electric engine as set out in UNECE regulation No 85;‘maximum net power’ means the maximum power of a combustion engine available on the test bench at the end of the crankshaft or equivalent component;‘defeat device’ means any element of design which senses temperature, vehicle speed, engine speed and/or load, transmission gear, manifold vacuum or any other parameter for the purpose of activating, modulating, delaying or deactivating the operation of any part of the emission control and exhaust after-treatment system and which reduces the effectiveness of the emission control system under conditions which may reasonably be expected to be encountered in normal vehicle operation and use;‘durability’ means the ability of components and systems to last so that the environmental performance requirements as laid down in Article 23 and Annex V can still be met after a mileage as defined in Annex VII and so that vehicle functional safety is ensured, if the vehicle is used under normal or intended circumstances and serviced in accordance with the manufacturer’s recommendations;‘engine capacity’ means:for reciprocating piston engines, the nominal engine swept volume;for rotary-piston (Wankel) engines, double the nominal engine swept volume;‘evaporative emissions’ means the hydrocarbon vapours lost from the fuel storage and supply system of a motor vehicle and not those from tailpipe emissions;‘SHED test’ means a vehicle test in a sealed house for evaporation determination, in which a special evaporative emission test is conducted;‘gaseous fuel system’ means a system composed of gaseous fuel storage, fuel supply, metering and control components fitted to an engine in order to allow the engine to run on LPG, CNG or hydrogen as a mono-fuel, bi-fuel or multi-fuel application;‘gaseous pollutant’ means the exhaust gas emissions of carbon monoxide (CO), oxides of nitrogen (NOx) expressed in nitrogen dioxide (NO2) equivalent, and hydrocarbons (HC);‘tailpipe emissions’ means the emission of gaseous pollutants and particulate matter at the tailpipe of the vehicle;‘particulate matter’ means components of the exhaust gas which are removed from the diluted exhaust gas at a maximum temperature of 325 K (52 °C) by means of the filters described in the test procedure for verifying average tailpipe emissions;‘Worldwide harmonised Motorcycle Testing Cycle’ or ‘WMTC’ means the world harmonised emission laboratory test cycle WMTC as defined by UNECE global technical regulation No 2;‘manufacturer’ means any natural or legal person who is responsible to the approval authority for all aspects of the type-approval or authorisation process, for ensuring conformity of production and who is also responsible for market surveillance concerns for the vehicles, systems, components and separate technical units produced, whether or not the natural or legal person is directly involved in all stages of the design and construction of the vehicle, system, component or separate technical unit which is the subject of the approval process;‘manufacturer’s representative’ means any natural or legal person established in the Union who is duly appointed by the manufacturer to represent the manufacturer before the approval authority or the market surveillance authority and to act on the manufacturer’s behalf in matters covered by this Regulation;‘importer’ means any natural or legal person established in the Union who places on the market a vehicle, system, component, separate technical unit, part or equipment from a third country;‘distributor’ means any natural or legal person in the supply chain, other than the manufacturer or the importer, who makes available a vehicle, system, component, separate technical unit, part or equipment on the market;‘economic operator’ means the manufacturer, the manufacturer’s representative, the importer or the distributor;‘registration’ means the administrative authorisation for the entry into service in road traffic of a vehicle, involving the identification of the latter and the issuing to it of a serial number, to be known as the registration number, be it permanently, temporarily or for a short period of time;‘entry into service’ means the first use, for its intended purpose, in the Union, of a vehicle, system, component, separate technical unit, part or equipment;‘placing on the market’ means making available a vehicle, system, component, separate technical unit, part or equipment for the first time in the Union;‘making available on the market’ means any supply of a vehicle, system, component, separate technical unit, part or equipment for distribution or use on the market in the course of a commercial activity, whether in return for payment or free of charge;‘approval authority’ means the authority of a Member State established or appointed by the Member State and notified to the Commission by the Member State, with competence for all aspects of the approval of a type of vehicle, system, component or separate technical unit, for the authorisation process, for issuing and, if appropriate, withdrawing or refusing approval certificates, for acting as the contact point for the approval authorities of other Member States, for designating the technical services and for ensuring that the manufacturer meets his obligations regarding the conformity of production;‘market surveillance authority’ means an authority of a Member State responsible for carrying out market surveillance on its territory;‘market surveillance’ means the activities carried out and measures taken by national authorities to ensure that vehicles, systems, components or separate technical units made available on the market comply with the requirements set out in the relevant Union harmonisation legislation and do not endanger health, safety or any other aspect of public interest protection;‘national authority’ means an approval authority or any other authority involved in and responsible for market surveillance, border control or registration in a Member State in respect of vehicles, systems, components or separate technical units, parts or equipment;‘technical service’ means an organisation or body designated by the approval authority of a Member State as a testing laboratory to carry out tests, or as a conformity assessment body to carry out the initial assessment and other tests or inspections, on behalf of the approval authority, it being possible for the approval authority itself to carry out those functions;‘self-testing’ means the performance of tests in its own facilities, the registration of the test results and the submission of a report, including conclusions, to the approval authority by a manufacturer that has been designated as a technical service in order to assess compliance with certain requirements;‘virtual testing method’ means computer simulations, including calculations, to demonstrate whether a vehicle, a system, a component or a separate technical unit fulfils the technical requirements of a delegated act adopted pursuant to Article 32(6) without requiring the use of a physical vehicle, system, component or separate technical unit;‘on-board diagnostic system’ or ‘OBD system’ means a system which has the capability to identify the likely area of malfunction by means of fault codes stored in a computer memory;‘vehicle repair and maintenance information’ means all information required for diagnosis, servicing, inspection, periodic monitoring, repair, re-programming or re-initialising of a vehicle and which manufacturers provide to their authorised dealers and repairers, including all subsequent amendments and supplements to such information; that information includes all information required for the fitting of parts and equipment on vehicles;‘independent operator’ means undertakings other than authorised dealers and repairers which are directly or indirectly involved in the repair and maintenance of vehicles, in particular repairers, manufacturers or distributors of repair equipment, tools or spare parts, publishers of technical information, automobile clubs, roadside assistance operators, operators offering inspection and testing services, operators offering training for installers, manufacturers and repairers of equipment for alternative fuel vehicles;‘authorised repairer’ means a provider of repair and maintenance services for vehicles operating within the distribution system set up by a supplier of vehicles;‘end-of-series vehicle’ means any vehicle that is part of a stock which cannot be made available on the market or can no longer be made available on the market, registered or enter into service owing to the entry into force of new technical requirements against which it has not been approved;‘powered two-wheeler’ or ‘PTW’ means a powered two-wheel vehicle, including powered two-wheel cycles, two-wheel mopeds and two-wheel motorcycles;‘powered tricycle’ means a powered three-wheel vehicle meeting the classification criteria for L5e category vehicles;‘quadricycle’ means a four-wheel vehicle meeting the classification criteria for L6e or L7e category vehicles;‘self-balancing vehicle’ means a vehicle concept that is based on an inherent unstable equilibrium and that needs an auxiliary control system to maintain its balance, and which includes powered one-wheel vehicles or powered two-wheel, two-track vehicles;‘twinned wheels’ means two wheels mounted on the same axle which are considered to be one wheel, whereby the distance between the centres of their areas of contact with the ground is equal to or less than 460 mm;‘vehicle type’ means a group of vehicles, including variants and versions of a particular category that do not differ in at least the following essential respects:category and subcategory;manufacturer;chassis, frame, sub-frame, floor pan or structure to which major components are attached;type designation given by the manufacturer;‘variant’ means a vehicle of the same type where:the basic characteristics of the bodywork shape are the same;the propulsion and propulsion configuration are the same;if a combustion engine is part of the propulsion, the engine operating cycle is the same;the number and arrangement of cylinders are the same;the type of gearbox is the same;the difference in mass in running order between the lowest value and the highest value does not exceed 20 % of the lowest value;the difference in the maximum permissible mass between the lowest value and the highest value does not exceed 20 % of the lowest value;the difference in the cylinder capacity of the power unit (in the case of a combustion unit) between the lowest value and the highest value does not exceed 30 % of the lowest value; andthe difference in the power output of the power unit between the lowest value and the highest value does not exceed 30 % of the lowest value;‘version of a variant’ means a vehicle which consists of a combination of items shown in the information package referred to in Article 29(10);‘external combustion engine’ means a heat engine in which combustion and expansion chambers are physically separated and where an internal working fluid is heated by combustion in an external source; heat from the external combustion expands the internal working fluid which then, by expanding and acting on the mechanism of the engine, produces motion and usable work;‘powertrain’ means the components and systems of a vehicle that generate power and deliver it to the road surface, including the engine(s), the engine management systems or any other control module, the pollution environmental protection control devices including pollutant emissions and noise abatement systems, the transmission and its control, either a drive shaft or belt drive or chain drive, the differentials, the final drive, and the driven wheel tyre (radius);‘mono fuel vehicle’ means a vehicle that is designed to run primarily on one type of fuel;‘mono fuel gas vehicle’ means a mono fuel vehicle that primarily runs on LPG, NG/biomethane, or hydrogen but may also have a petrol system for emergency purposes or starting only, where the petrol tank does not contain more than 5 litres of petrol;‘E5’ means a fuel blend of 5 % anhydrous ethanol and 95 % petrol;‘LPG’ means liquefied petroleum gas which is composed of propane and butane liquefied by storage under pressure;‘NG’ means natural gas containing a very high methane content;‘biomethane’ means a renewable natural gas made from organic sources that starts out as ‘biogas’ but then is cleaned up in a process called ‘biogas to biomethane’ which removes the impurities in biogas such as carbon dioxide, siloxanes and hydrogen sulphides (H2S);‘bi-fuel vehicle’ means a vehicle with two separate fuel storage systems that can run part-time on two different fuels and is designed to run on only one fuel at a time;‘bi-fuel gas vehicle’ means a bi-fuel vehicle that can run on petrol and also on either LPG, NG/biomethane or hydrogen;‘flex fuel vehicle’ means a vehicle with one fuel storage system that can run on different blends of two or more fuels;‘E85’ means a fuel blend of 85 % anhydrous ethanol and 15 % petrol;‘flex fuel ethanol vehicle’ means a flex fuel vehicle that can run on petrol or a mixture of petrol and ethanol up to an 85 % ethanol blend;‘H2NG’ means a fuel blend of hydrogen and natural gas;‘flex fuel H2NG vehicle’ means a flex fuel vehicle that can run on different blends of hydrogen and NG/biomethane;‘flex fuel biodiesel vehicle’ means a flex fuel vehicle that can run on mineral diesel or a blend of mineral diesel and biodiesel;‘B5’ means a fuel blend of up to 5 % biodiesel and 95 % petroleum diesel;‘biodiesel’ means a vegetable oil- or animal fat-based diesel fuel consisting of long-chain alkyl esters produced in a sustainable way;‘pure electric vehicle’ means a vehicle powered by:a system consisting of one or more electric energy storage devices, one or more electric power conditioning devices and one or more electric machines that convert stored electric energy to mechanical energy delivered at the wheels for propulsion of the vehicle;an auxiliary electric propulsion fitted to a vehicle designed to pedal;‘hydrogen fuel cell vehicle’ means a vehicle powered by a fuel cell that converts chemical energy from hydrogen into electric energy, for propulsion of the vehicle;‘R-point’ or ‘seating reference point’ means a design point defined by the vehicle manufacturer for each seating position and established with respect to the three-dimensional reference system.References in this Regulation to requirements, procedures or arrangements laid down in this Regulation shall be read as references to such requirements, procedures or arrangements laid down in this Regulation and in the delegated and implementing acts adopted pursuant to this Regulation. Vehicle categories Article 4 1 L-category vehicles comprise powered two-, three- and four-wheel vehicles as categorised in this Article and Annex I, including powered cycles, two- and three-wheel mopeds, two- and three-wheel motorcycles, motorcycles with side-cars, light and heavy on-road quads, and light and heavy quadri-mobiles. 2 For the purposes of this Regulation, the following vehicle categories and subcategories shall apply, as described in Annex I: a category L1e vehicle (light two-wheel powered vehicle), sub-categorised into: L1e-A vehicle (powered cycle); L1e-B vehicle (two-wheel moped); b category L2e vehicle (three-wheel moped) sub-categorised into: L2e-P vehicle (three-wheel moped designed for passenger transport); L2e-U vehicle (three wheel moped designed for utility purposes); c category L3e vehicle (two-wheel motorcycle), sub-categorised by: motorcycle performance, further sub-categorised into: L3e-A1 vehicle (low-performance motorcycle), L3e-A2 vehicle (medium-performance motorcycle), L3e-A3 vehicle (high-performance motorcycle); special use: L3e-A1E, L3e-A2E or L3e-A3E enduro motorcycle, L3e-A1T, L3e-A2T or L3e-A3T trial motorcycle; d category L4e vehicle (two-wheel motorcycle with side-car); e category L5e vehicle (powered tricycle), sub-categorised into: L5e-A vehicle (tricycle): vehicle mainly designed for passenger transport; L5e-B vehicle (commercial tricycle): utility tricycle exclusively designed for the carriage of goods; f category L6e vehicle (light quadricycle), sub-categorised into: L6e-A vehicle (light on-road quad); L6e-B vehicle (light quadri-mobile), further sub-categorised into: L6e-BU vehicle (light quadri-mobile for utility purposes): utility vehicle exclusively designed for the carriage of goods, L6e-BP vehicle (light quadri-mobile for passenger transport): vehicle mainly designed for passenger transport; g category L7e vehicle (heavy quadricycles), sub-categorised into: L7e-A vehicle (heavy on-road quad) sub-categorised into: L7e-A1: A1 on-road quad, L7e-A2: A2 on-road quad; L7e-B vehicle (heavy all terrain quad), subcategorised into: L7e-B1: all terrain quad, L7e-B2: side-by-side buggy; L7e-C vehicle (heavy quadri-mobile), sub-categorised into: L7e-CU vehicle (heavy quadri-mobile for utility purposes): utility vehicle exclusively designed for the carriage of goods, L7e-CP vehicle (heavy quadri-mobile for passenger transport): vehicle mainly designed for passenger transport. 3 The L-category vehicles listed in paragraph 2 are further classified according to the propulsion of the vehicle: a propelled with an internal combustion engine: compression ignition (CI), positive ignition (PI); b propelled with an external combustion engine, a turbine or a rotary piston engine, whereby, for the purpose of complying with environmental performance and functional safety requirements, a vehicle equipped with such a propulsion is considered the same as a vehicle propelled with a PI internal combustion engine; c propelled by an engine that runs on pre-compressed air and does not emit higher levels of pollutants and/or inert gases than the levels present in ambient air, whereby, with regard to functional safety requirements and fuel storage and supply, such a vehicle is considered to be a vehicle operated on gaseous fuel; d propelled with an electric engine; e a hybrid vehicle that combines any propulsion configuration referred to in points (a), (b), (c) or (d) of this paragraph or any multiple combination of these propulsion configurations including multiple combustion and/or electric engines. 4 As regards the classification of L-category vehicles in paragraph 2, a vehicle that does not come under a certain category because it exceeds at least one of the criteria stipulated for that category falls into the next category whose criteria it meets. This applies to the following groups of categories and subcategories: a category L1e with its subcategories L1e-A and L1e-B and category L3e with its subcategories L3e-A1, L3e-A2 and L3e-A3; b category L2e and category L5e with its subcategories L5e-A and L5e-B; c category L6e with its subcategories L6e-A and L6e-B and category L7e with its subcategories L7e-A, L7e-B and L7e-C; d any other logical sequence of categories and/or subcategories proposed by the manufacturer and approved by the approval authority. 5 Notwithstanding the (sub-)classification criteria set out in paragraphs 1 to 4 of this Article and in Annex I, additional subcategories shall apply as set out in Annex V, in order to harmonise environmental performance test procedures at the international level by referring to UNECE regulations and UNECE global technical regulations. Mass in running order determination Article 5 1 The mass in running order of an L-category vehicle shall be determined by measuring the mass of the unladen vehicle ready for normal use and shall include the mass of: a liquids; b standard equipment in accordance with the manufacturer’s specifications; c ‘fuel’ in the fuel tanks that shall be filled to at least 90 % of their capacities. For the purposes of this point: if a vehicle is propelled with a ‘liquid fuel’ this shall be considered as ‘fuel’; if a vehicle is propelled with a liquid ‘fuel/oil mixture’: if fuel to propel the vehicle and lubrication oil are pre-mixed then this ‘pre-mixture’ shall be considered as ‘fuel’, if fuel to propel the vehicle and lubrication oil are stored separately then only ‘fuel’ propelling the vehicle shall be considered as ‘fuel’; or if a vehicle is propelled by a gaseous fuel, a liquefied gaseous fuel or is running on compressed air, the mass of ‘fuel’ in the gaseous fuel tanks may be set to 0 kg; d the bodywork, the cabin, the doors; and e the glazing, the coupling, the spare wheels as well as the tools. 2 The mass in running order of an L-category vehicle shall exclude the mass of: a the driver (75 kg) and passenger (65 kg); b the machines or equipment installed on the load platform area; c in the case of a hybrid or pure electric vehicle, the propulsion batteries; d in the case of mono-fuel, bi-fuel or multi-fuel vehicles, a gaseous fuel system as well as storage tanks for gaseous fuel; and e in the case of pre-compressed air propulsion, storage tanks to store compressed air. See page 1 of this Official Journal OJ L 59, 27.2.1998, p. 1. OJ L 157, 9.6.2006, p. 24. Directive 2006/126/EC of the European Parliament and of the Council of 20 December 2006 on driving licences (OJ L 403, 30.12.2006, p. 18); see performance definitions, categories A1 and A2, in points (a) and (b) of Article 4(3). Substituted by Corrigendum to Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles (Official Journal of the European Union L 60 of 2 March 2013).