1.The verifier shall check the correct application and implementation of the monitoring methodology as approved by the competent authority in the monitoring plan, including specific details of that monitoring methodology.
2.For the purposes of verifying the operator’s emission report, the verifier shall check the correct application and implementation of the sampling plan referred to in Article 33 of Regulation (EU) No 601/2012, as approved by the competent authority.
3.Where CO2 is transferred in accordance with Articles 48 and 49 of Regulation (EU) No 601/2012 and the CO2 transferred is measured by both the transferring and receiving installation, the verifier shall check whether differences between the measured values at both installations can be explained by the uncertainty of the measurement systems and whether the correct arithmetic average of the measured values has been used in the emission reports of both installations.
Where the differences between the measured values at both installations cannot be explained by the uncertainty of the measurement systems, the verifier shall check whether adjustments were made to align the differences between the measured values, whether those adjustments were conservative and whether the competent authority has granted approval for those adjustments.
4.Where operators are required, pursuant to Article 12(3) of Regulation (EU) No 601/2012, to include further elements in the monitoring plan that are relevant for meeting the requirements of Article 24(1) of Commission Decision 2011/278/EU(1), the verifier shall check the correct application and implementation of the procedures referred to in Article 12(3) of that Regulation. In doing so, the verifier shall also check whether information on any planned or actual changes to the capacity, activity level and operation of an installation have been submitted by the operator to the competent authority by 31 December of the reporting period.