Calendar year,,, Facility , Name,, Street,, City,, Country,, Contact person,, E-mail,, Tel.,, Description of the complete battery recycling process :, Notes:, Facility treating the waste batteries and accumulators after collection, eventual sorting and preparation for recycling., Description of the complete battery recycling process, no matter if carried out by one or several facilities (including a description of the individual recycling steps and their output fractions)., Description of waste batteries and accumulators as received after collection, eventual sorting and preparation for recycling., Wet mass of waste batteries and accumulators as received after collection, eventual sorting and preparation for recycling (the mass of separated impurities and outer casing of battery packs as well as the water content as specified in the field ‘overall composition’ shall be subtracted for the calculation of the recycling efficiency)., Data transferred from Annex IV(2)., Calculated according to the formula for RE based on data reported according to Annex IV(2)., Calculated according to the formula for R Pb based on data reported according to Annex IV(2)., Examples of impurities include plastic, ebonite chips, items/pieces of iron, fibres from electronic scrap, molten aluminium., ,,, ,,,Elements or components, which are not part of the input fractions, ,,, ,Impurities ,,, Outer casing of battery pack,, Water (H 2 O),, Other,, Elements or components, which are part of the input fractions, Lead (Pb),,, Sulphuric acid (H 2 SO 4 ),,, Plastics,,, Other,,, ,,, ,,, m input , total,,, ,, m output , Pb,, m output , total,, , Recycling efficiency (R E ) :,m output /m input ,,mass %, Degree of recycled Pb (R Pb ) :,m Pb output /m Pb input ,,mass %, Calendar year,,, Facility , Name,, Street,, City,, Country,, Contact person,, E-mail,, Tel.,, Description of the individual process step:, Notes:, Facility carrying out an individual process step., For step 1 = the same as input into the complete battery recycling process. For subsequent steps = intermediate fractions from the previous process step., Intermediate fractions = fractions destined for subsequent step(s) in the recycling process., Resulting from the batteries input (dry mass)., Facility to which the intermediate fraction is handed over or — if the further process step is carried out internally — the same as 1., Final output fractions accounting for recycling = that have ceased to be waste and that will be used for their original purpose or for other purposes without undergoing further treatment, but excluding energy recovery. See also examples in Annex I(5)., Elements and compounds if they were component of the batteries input (waste battery). See special provisions and examples in Annex I(5). For lead (Pb) in slag see the provision in Annex II(2). Lead must be entered as ‘Pb’., ,,, ,,, ,,, ,,,,,1_1, ,,,,,1_2, ,,,,,1_3, ,,,,,1_4, ,,,,,1_5, ,,,,,1_6, ,,,,,1_7, ,,,,,1_8, ,,,,,1_9, ,,,,,1_10, ,,,,, ,,,,, ,m output , Pb,,, m output , total,, Calendar year,,, Facility , Name,, Street,, City,, Country,, Contact person,, E-mail,, Tel.,, Description of the complete battery recycling process :, Notes :, Facility reprocessing the waste batteries and accumulators after collection and eventual sorting., Description of the complete battery recycling process, no matter if carried out by one or several facilities (including a description of the individual recycling steps and their output fractions)., Description of waste batteries and accumulators as received after collection and eventual sorting and preparation for recycling., Wet mass of waste batteries and accumulators as received after collection and eventual sorting (the mass of separated impurities and outer casing of battery packs as well as the water content as specified in the field ‘overall composition’ shall be subtracted for the calculation of the recycling efficiency)., Data transferred from Annex V(2)., Calculated according to the formula for RE based on data reported according to Annex V(2)., Calculated according to the formula for R Cd based on data reported according to Annex V(2)., Examples of impurities include plastic, ebonite chips, items/pieces of iron, fibres from electronic scrap, molten aluminium., ,,, ,,,Elements or components, which are not part of the input fractions, ,,, ,Impurities ,,, Outer casing of battery pack,, Water (H 2 O),, Other,, Elements or components, which are part of the input fractions, Cadmium (Cd),,, Nickel (Ni),,, Iron (Fe),,, Plastics,,, Electrolyte,,, ,,, m input , total,,, ,, m output , Cd,, m output , total,, , Recycling efficiency (R E ) :,m output /m input ,,mass %, Degree of recycled Cd (R Cd ) :,m Cd output /m Cd input ,,mass %, Calendar year,,, Facility , Name,, Street,, City,, Country,, Contact person,, E-mail,, Tel.,, Description of the individual process step:, Notes :, Facility carrying out an individual process step., For step 1 = the same as input into the complete battery recycling process. For subsequent steps = intermediate fractions from the previous process step., Intermediate fractions = fractions destined for subsequent step(s) in the recycling process., Resulting from the batteries input (dry mass)., Facility to which the intermediate fraction is handed over or — if the further process step is carried out internally — the same as 1., Final output fractions accounting for recycling = that will be used for their original purpose or for other purposes without undergoing further treatment, see also examples in Annex I(5)., Elements and compounds if they were component of the batteries input (waste battery). See special provisions and examples in Annex I(5). For cadmium (Cd) in slag see provisions in Annex III(2). Cadmium must be entered as ‘Cd’., ,,, ,,,,,1_1, ,,,,,1_2, ,,,,,1_3, ,,,,,1_4, ,,,,,1_5, ,,,,,1_6, ,,,,,1_7, ,,,,,1_8, ,,,,,1_9, ,,,,,1_10, ,,,,, ,,,,, ,m output , Cd,,, m output , total,, Calendar year,,, Facility , Name,, Street,, City,, Country,, Contact person,, E-mail,, Tel.,, Description of the complete battery recycling process :, Notes:, Facility treating the waste batteries and accumulators after collection, eventual sorting and preparation for recycling., Description of the complete battery recycling process, no matter if carried out by one or several facilities (including a description of the individual recycling steps and their output fractions)., Description of waste batteries and accumulators as received after collection, eventual sorting and preparation for recycling., Wet mass of waste batteries and accumulators as received after collection, eventual sorting and preparation for recycling (the mass of separated impurities and outer casing of battery packs as well as the water content as specified in the field ‘overall composition’ shall be subtracted for the calculation of the recycling efficiency)., Data transferred from Annex VI(2)., Calculated according to the formula for R E based on data reported according to Annex VI(2)., Examples of impurities include plastic, ebonite chips, items/pieces of iron, fibres from electronic scrap, molten aluminium., ,,, ,,,Elements or components, which are not part of the input fractions, ,,, ,Impurities ,,, Outer casing of battery pack,, Water (H 2 O),, Other,, Elements or components, which are part of the input fractions, Metals (e.g. Fe, Mn, Zn, Ni, Co, Li, Ag, Cu, Al),,, Mercury (Hg),,, Carbon,,, Plastics,,, Electrolyte,,, ,,, m input , total,,, ,, m output , total,, , Recycling efficiency (R E ) :,m output /m input ,,mass %, Calendar year,,, Facility , Name,, Street,, City,, Country,, Contact person,, E-mail,, Tel.,, Description of the individual process step:, Notes:, Facility carrying out an individual process step, For step 1 = the same as input into the complete battery recycling process. For subsequent steps = intermediate fractions from the previous process step., Intermediate fractions = fractions destined for subsequent step(s) in the recycling process., Resulting from the batteries input (dry mass)., Facility to which the intermediate fraction is handed over or — if the further process step is carried out internally — the same as 1., Final output fractions accounting for recycling = that will be used for their original purpose or for other purposes without undergoing further treatment, see also examples in Annex I(5)., Elements and compounds if they were component of the batteries input (spent battery). See special provisions and examples in Annex I(5)., ,,, ,,,,,1_1, ,,,,,1_2, ,,,,,1_3, ,,,,,1_4, ,,,,,1_5, ,,,,,1_6, ,,,,,1_7, ,,,,,1_8, ,,,,,1_9, ,,,,,1_10, ,,,,, ,,,,, ,m output , total,,,