Commission Regulation (EU) No 249/2012 of 21 March 2012 amending Regulation (EU) No 19/2011 as regards type-approval requirements for the manufacturer’s statutory plate of motor vehicles and their trailers (Text with EEA relevance)

Article 1U.K.

Part A of Annex I to Regulation (EU) No 19/2011 is amended as follows:

(1)

point 2.2 is replaced by the following:

‘2.2.The height of the characters of the vehicle identification number referred to in point 2.1(c) shall not be less than 4 mm.’;

(2)

the following point 2.3 is inserted after point 2.2:

‘2.3.The height of the characters of the information referred to in point 2.1, other than the vehicle identification number, shall not be less than 2 mm.’.

Commission Regulation (EU) No 249/2012Show full title

Article 1U.K.

‘2.2.The height of the characters of the vehicle identification number referred to in point 2.1(c) shall not be less than 4 mm.’;

‘2.3.The height of the characters of the information referred to in point 2.1, other than the vehicle identification number, shall not be less than 2 mm.’.