Commission Regulation (EU) No 1229/2012

of 10 December 2012

amending Annexes IV and XII to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive)

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive)1, and in particular Article 39(2) and (3) thereof,

Whereas:

(1)

Directive 2007/46/EC establishes a harmonised framework containing the administrative provisions and general technical requirements for all new vehicles. In particular it includes the regulatory acts laying down the technical requirements with which vehicles have to comply in order to be granted EC vehicle type-approval.

(2)

Part 1 of Annex IV to Directive 2007/46/EC contains a list of regulatory acts for EC type-approval of vehicles produced in unlimited series. Directive 2007/46/EC has been amended several times and that list has accordingly been updated.

(3)
Regulation (EC) No 661/2009 of the European Parliament and of the Council of 13 July 2009 concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor2, provides for the repeal of several Directives. The repealed Directives have been replaced by corresponding United Nations Economic Commission for Europe (UNECE) Regulations and by Commission Regulations. Those changes should be reflected in Annex IV to Directive 2007/46/EC.
(4)

It is essential to adapt the requirements for EC type-approval of small series in order to ensure that manufacturers who produce small series of vehicles may continue to have access to the internal market. For such purposes, it is necessary to adopt simplified measures to reduce the cost required by the type-approval process whereas at the same time ensuring a high level of road safety and protection of the environment.

(5)

Since N1 vehicles exhibit construction features similar to those of M1 vehicles, it is also appropriate to lay down harmonised technical requirements for vehicles of category N1 in order to allow such vehicles produced in small series to access the internal market.

(6)

It is essential that the requirements laid down in Appendix 1 to Annex IV to Directive 2007/46/EC apply to all new vehicles. However, sufficient time should be given to manufacturers to allow them to adapt their vehicles to the new requirements.

(7)

Sections 1 and 2 of Part A of Annex XII to Directive 2007/46/EC include quantitative limits for the purposes of EC type-approval of small series. It is appropriate, when extending EC type-approval of small series to vehicles of category N1, to introduce a quantitative limit for vehicles of that category. Likewise, given the purpose of EC type-approval, namely to foster access to the internal market, the number of vehicles of category N1 that may benefit from national type-approval pursuant to Article 23 of Directive 2007/46/EC should be restricted to the necessary minimum. Therefore, the quantity of those vehicles should also be laid down.

(8)

Annexes IV and XII to Directive 2007/46/EC should therefore be amended accordingly.

(9)

The measures provided for in this Regulation are in accordance with the opinion of the Technical Committee — Motor Vehicles,

HAS ADOPTED THIS REGULATION: