Commission Delegated Regulation (EU) No 626/2011 of 4 May 2011 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of air conditioners (c. 626)

1. Introductory Text

2. Article 1. Subject matter and scope

3. Article 2. Definitions

4. Article 3. Responsibilities of suppliers

5. Article 4. Responsibilities of dealers

6. Article 5. Measurement methods

7. Article 6. Verification procedure for market surveillance purposes

8. Article 7. Revision

9. Article 8. Repeal

10. Article 9. Transitional provision

11. Article 10. Entry into force and application

12. Signature

13. 1. ANNEX I

       Definitions applicable for the purposes of Annexes II to VII

       1. For the purposes of Annexes II to VII, the following...

       2. ‘Reversible air conditioner’ means an air conditioner capable of both...

    2. ANNEX II

       Energy efficiency classes

       1. 1. The energy efficiency of air conditioners shall be determined on...

    3. ANNEX III

       The label

       1. 1. LABEL OF AIR CONDITIONERS, EXCEPT SINGLE DUCT AND DOUBLE DUCT...

          1. 1.1. Reversible air conditioners classified in energy efficiency classes A to...

             1. (a) The following information shall be included in the label:

             2. (b) The design of the label shall be in accordance with...

          2. 1.2. Reversible air conditioners classified in energy efficiency classes A+ to...

             1. (a) The information listed in point 1.1 shall be included in...

             2. (b) The design aspects of the label shall be in accordance...

          3. 1.3. Reversible air conditioners classified in energy efficiency classes A++ to...

             1. (a) The information listed in point 1.1 shall be included in...

             2. (b) The design aspects of the label shall be in accordance...

          4. 1.4. Reversible air conditioners classified in energy efficiency classes A+++ to...

             1. (a) The information listed in point 1.1 shall be included in...

             2. (b) The design aspects of the label shall be in accordance...

          5. 1.5. Label design

       2. 2. LABEL OF AIR CONDITIONERS, EXCEPT SINGLE DUCT AND DOUBLE DUCT...

          1. 2.1. Cooling-only air conditioners classified in energy efficiency classes A to...

             1. (a) The following information shall be included in the label:

             2. (b) The design of the label shall be in accordance with...

          2. 2.2. Cooling-only air conditioners classified in energy efficiency classes A+ to...

             1. (a) The information listed in point 2.1 shall be included in...

             2. (b) The design aspects of the label shall be in accordance...

          3. 2.3. Cooling-only air conditioners classified in energy efficiency classes A++ to...

             1. (a) The information listed in point 2.1 shall be included in...

             2. (b) The design aspects of the label shall be in accordance...

          4. 2.4. Cooling-only air conditioners classified in energy efficiency classes A+++ to...

             1. (a) The information listed in point 2.1 shall be included in...

             2. (b) The design aspects of the label shall be in accordance...

          5. 2.5. Label design

       3. 3. LABEL OF AIR CONDITIONERS, EXCEPT SINGLE DUCT AND DOUBLE DUCT...

          1. 3.1. Heating-only air conditioners classified in energy efficiency classes A to...

             1. (a) The following information shall be included in the label:

             2. (b) The design of the label shall be in accordance with...

          2. 3.2. Heating-only air conditioners classified in energy efficiency classes A+ to...

             1. (a) The information listed in point 3.1 shall be included in...

             2. (b) The design aspects of the label shall be in accordance...

          3. 3.3. Heating-only air conditioners classified in energy efficiency classes A++ to...

             1. (a) The information listed in point 3.1 shall be included in...

             2. (b) The design aspects of the label shall be in accordance...

          4. 3.4. Heating-only air conditioners classified in energy efficiency classes A+++ to...

             1. (a) The information listed in point 3.1 shall be included in...

             2. (b) The design aspects of the label shall be in accordance...

          5. 3.5. Label design

       4. 4. LABEL OF DOUBLE DUCT AIR CONDITIONERS

          1. 4.1. Reversible double duct air conditioners classified in energy efficiency classes...

             1. (a) The following information shall be included in the label:

             2. (b) The design of the label shall be in accordance with...

          2. 4.2. Label Design

          3. 4.3. Cooling-only double duct air conditioners classified in energy efficiency classes...

             1. (a) The following information shall be included in the label:

             2. (b) The design of the label shall be in accordance with...

          4. 4.4. Label Design

          5. 4.5. Heating-only double duct air conditioners classified in energy efficiency classes...

             1. (a) The following information shall be included in the label:

             2. (b) The design of the label shall be in accordance with...

          6. 4.6. Label Design

       5. 5. LABEL OF SINGLE DUCT AIR CONDITIONERS

          1. 5.1. Reversible single duct air conditioners classified in energy efficiency classes...

             1. (a) The following information shall be included in the label:

             2. (b) The design of the label shall be in accordance with...

          2. 5.2. Label Design

          3. 5.3. Cooling-only single duct air conditioners classified in energy efficiency classes...

             1. (a) The following information shall be included in the label:

             2. (b) The design of the label shall be in accordance with...

          4. 5.4. Label Design

          5. 5.5. Heating-only single duct air conditioners classified in energy efficiency classes...

             1. (a) The following information shall be included in the label:

             2. (b) The design of the label shall be in accordance with...

          6. 5.6. Label Design

    4. ANNEX IV

       Product fiche

       1. 1. The information in the product fiche shall be given in...

       2. 2. Additionally, the following information shall be included in the product...

       3. 3. Additionally, the following notes define the information to be included...

       4. 4. Additionally, the following notes define the information to be included...

       5. 5. One fiche may cover a number of appliance models supplied...

       6. 6. The information contained in the fiche may be given in...

    5. ANNEX V

       Technical documentation

       1. The technical documentation referred to in Article 3 (1)(c) shall...

       2. the name and address of the supplier; a general description...

       3. Suppliers may include additional information at the end of the...

       4. Where the information included in the technical documentation file for...

    6. ANNEX VI

       Information to be provided in the cases where end-users cannot be expected to see the product displayed

       1. 1. The information referred to in Article 4(b) shall be provided...

       2. 2. Where other information contained in the product information fiche is...

       3. 3. The size and font in which all the information referred...

    7. ANNEX VII

       Measurements and calculations

       1. 1. For the purposes of compliance and verification of compliance with...

       2. 2. The determination of the seasonal energy consumption and seasonal energy...

       3. 3. Where the information relating to a specific model, being a...

       4. 4. The energy efficiency ratio (EERrated) and, when applicable, coefficient of...

       5. 5. The calculation of electricity consumption for cooling and/or heating shall...

       6. Table 1 Bin number (j), outdoor temperature (Tj) in °C...

       7. Table 2 Standard rating conditions, temperatures in ‘dry bulb’ air...

       8. Table 3 Reference design conditions, temperatures in ‘dry bulb’ air...

       9. Table 4 Operational hours per type of appliance per functional...

    8. ANNEX VIII

       Product compliance verification by market surveillance authorities

       1. The verification tolerances set out in this Annex relate only...

       2. When verifying the compliance of a product model with the...

       3. The Member State authorities shall verify one single unit of...

       4. The Member State authorities shall use the measurement and calculation...

       5. The Member State authorities shall only apply the verification tolerances...

       6. Table 1 Verification tolerances Parameters Verification tolerances Seasonal energy efficiency...

    9. ANNEX IX

       Information to be provided in the case of sale, hire or hire-purchase through the internet

       1. (1) For the purpose of points 2 to 5 of this...

       2. (2) The appropriate label made available by suppliers in accordance with...

       3. (3) The image used for accessing the label in the case...

       4. (4) In the case of nested display, the sequence of display...

       5. (5) The appropriate product fiche made available by suppliers in accordance...