ANNEX VIInformation to be provided in the cases where end-users cannot be expected to see the product displayed

1.The information referred to in Article 4(b) shall be provided in the following order:

  1. (a)

    The energy efficiency class of the model as defined in Annex II;

  2. (b)

    for air conditioners other than single ducts and double ducts:

    1. (i)

      the seasonal energy efficiency ratio (SEER) and/or seasonal coefficient of performance (SCOP);

    2. (ii)

      the design load (in kW);

    3. (iii)

      the annual electricity consumption;

    4. (iv)

      the cooling and/or each heating (‘Average, Colder, Warmer’) season the appliance is declared fit for purpose;

  3. (c)

    for single duct and double duct air conditioners:

    1. (i)

      the energy efficiency ratio (EER) and/or coefficient of performance (COP);

    2. (ii)

      the rated capacity (kW);

    3. (iii)

      for double ducts, the hourly electricity consumption for cooling and/or heating;

    4. (iv)

      for single ducts, the hourly electricity consumption for cooling and/or heating;

  4. (d)

    Sound power levels expressed in dB(A) re1 pW, rounded to the nearest integer;

  5. (e)

    Name and GWP of refrigerant used.

2.

Where other information contained in the product information fiche is also provided, it shall be in the form and order specified in Annex IV.

3.

The size and font in which all the information referred in this Annex is printed or shown shall be legible.