Commission Regulation (EU) No 582/2011 of 25 May 2011 implementing and amending Regulation (EC) No 595/2009 of the European Parliament and of the Council with respect to emissions from heavy duty vehicles (Euro VI) and amending Annexes I and III to Directive 2007/46/EC of the European Parliament and of the Council (Text with EEA relevance) (c. 582)

ANNEX XI U.K. EC TYPE-APPROVAL OF REPLACEMENT POLLUTION CONTROL DEVICES AS SEPARATE TECHNICAL UNIT

Appendix 2

MODEL EC TYPE-APPROVAL CERTIFICATE (Maximum format: A4 (210 mm × 297 mm)) U.K.

EC TYPE-APPROVAL CERTIFICATE U.K.

Stamp of administration U.K.

Communication concerning the:

• EC type-approval (¹) …,

• extension of EC type-approval (¹) …,

• refusal of EC type-approval (¹) …,

• withdrawal of EC type-approval (¹) …

of a type of component/separate technical unit(1)

with regard to Regulation (EC) No 595/2009, as implemented by Regulation (EU) No 582/2011.

Regulation (EC) No 595/2009 or Regulation (EU) No 582/2011, as last amended by …

EC type-approval number: …

Reason for extension: …

SECTION I U.K.

0.1. Make (trade name of manufacturer): … U.K.

0.2. Type: … U.K.

0.3. Means of identification of type marked on the component/separate technical unit(2) (Identifying Part Number): … U.K.

0.3.1. Location of that marking: … U.K.

0.5. Name and address of manufacturer: … U.K.

0.7. In the case of components and separate technical units, location and method of affixing of the EC approval mark: … U.K.

0.8. Name and address(es) of assembly plant(s): … U.K.

0.9. Name and address of manufacturer’s representative: … U.K.

SECTION II U.K.

1. Additional information U.K.

1.1. Make and type of the replacement pollution control device: (oxidation catalyst, three-way catalyst, SCR catalyst, particulate filter, etc.) … U.K.

1.2. Engine and vehicle type(s) for which the pollution control device type qualifies as replacement part: … U.K.

1.3. Type(s) of engine on which the replacement pollution control device has been tested: … U.K.

1.3.1. Has the replacement pollution control device demonstrated compatibility with OBD requirements (yes/no)(1): … U.K.

2. Technical service responsible for carrying out the tests: … U.K.

3. Date of test report: … U.K.

4. Number of test report: … U.K.

5. Remarks: … U.K.

6. Place: … U.K.

7. Date: … U.K.

8. Signature: … U.K.

Attachments

:

Information package.

Test report.

(1)

Delete where not applicable.

(2)

If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this type-approval certificate such characters shall be represented in the document by the symbol: ‘?’ (e.g. ABC??123??).