ANNEX IIU.K.CONFORMITY OF IN-SERVICE ENGINES OR VEHICLES
Appendix 4
Method to check the conformity of the ECU torque signalU.K.
1.INTRODUCTIONU.K.
This Appendix describes in a non-detailed manner the method used to check the conformity of the ECU torque signal during ISC-PEMS testing.
The detailed applicable procedure is left to the engine manufacturer, subject to approval of the approval authority.
2.THE ‘MAXIMUM TORQUE’ METHODU.K.
2.1.The ‘maximum torque’ method consists of demonstrating that a point on the reference maximum torque curve as a function of the engine speed has been reached during vehicle testing.U.K.
[2.1.1.If a market fuel declared in point 3.2.2.2.1 of Part 1 in Appendix 4 to Annex I is used for the test, the ECU torque signal shall be divided by the correction factor prior to the verification with the reference maximum torque curve performed with that market fuel.]U.K.
[2.2.If a point on the reference maximum torque curve as a function of the engine speed has not been reached during the ISC PEMS emissions testing, the manufacturer is entitled to modify the load of the vehicle and/or the testing route as necessary in order to perform that demonstration after the ISC PEMS emissions test has been completed.]U.K.