xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"

  1. Introductory Text

  2. Article 1.Subject matter and scope

  3. Article 2.Definitions

  4. Article 3.Ecodesign requirements

  5. Article 4.Conformity assessment

  6. Article 5.Verification procedure for market surveillance purposes

  7. Article 6.Benchmarks

  8. Article 7.Revision

  9. Article 8.Entry into force and application

  10. Signature

    1. ANNEX I

      Ecodesign requirements

      1. 1. GENERIC ECODESIGN REQUIREMENTS

        1. (1) For the calculation of the energy consumption and other parameters...

        2. (2) The booklet of instructions provided by the manufacturer shall provide:...

        3. (3) Household washing machines shall offer to end-users a cycle at...

      2. 2. SPECIFIC ECODESIGN REQUIREMENTS

    2. ANNEX II

      Method for calculating the Energy Efficiency Index, Washing Efficiency Index, water consumption and remaining moisture content

      1. 1. CALCULATION OF THE ENERGY EFFICIENCY INDEX

      2. 2. CALCULATION OF THE WASHING EFFICIENCY INDEX

      3. 3. CALCULATION OF WATER CONSUMPTION

      4. 4. CALCULATION OF THE REMAINING MOISTURE CONTENT

    3. ANNEX III

      Product compliance verification by market surveillance authorities

      1. The verification tolerances defined in this Annex relate only to...

      2. When verifying the compliance of a product model with the...

      3. The Member State authorities shall verify one single unit of...

      4. Member States' authorities shall use measurement procedures which take into...

      5. The Member State authorities shall only apply the verification tolerances...

      6. Table 1 Verification tolerances Parameters Verification tolerances Annual energy consumption...

    4. ANNEX IV

      Benchmarks

      1. At the time of entry into force of this Regulation,...

      2. Household washing machines with a rated capacity of 3 kg:...