http://www.legislation.gov.uk/eur/2010/1003/article/1Commission Regulation (EU) No 1003/2010 of 8 November 2010 concerning type-approval requirements for the space for mounting and the fixing of rear registration plates on motor vehicles and their trailers and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor (Text with EEA relevance)Commission Regulation (EU) No 1003/2010Commission Regulation (EU) No 1003/2010 of 8 November 2010 concerning type-approval requirements for the space for mounting and the fixing of rear registration plates on motor vehicles and their trailers and implementing Regulation (EC) No 661/2009 of the European Parliament and of the Council concerning type-approval requirements for the general safety of motor vehicles, their trailers and systems, components and separate technical units intended therefor (Text with EEA relevance)King's Printer of Acts of Parliamenthttps://webarchive.nationalarchives.gov.uk/eu-exit/https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02010R1003-20150224texttext/xmlen2024-09-25Expert Participation2024-03-07 Definitions Article 1 For the purposes of this Regulation, the following definitions shall apply: ‘vehicle type with regard to the space for mounting and the fixing of rear registration plates’ means vehicles which do not differ in such essential respects as: the dimensions of the space for mounting and fixing of the rear registration plate; the location of the space for mounting and fixing of the rear registration plate; the shape of the surface for mounting and fixing of the rear registration plate. ‘virtually flat surface’ means a surface of solid material, which may also consist of patterned mesh or grille, with a radius of curvature of at least 5 000 mm. ‘surface of patterned mesh’ means a surface consisting of an evenly spread pattern of shapes such as round, oval, diamond, rectangular or square holes spread evenly at intervals not exceeding 15 mm. ‘surface of grille’ means a surface consisting of parallel bars which are spread evenly and have a mutual distance of not exceeding 15 mm. ‘nominal surface’ means the theoretical geometrically perfect surface without taking into account surface irregularities such as protrusions or indentations. ‘longitudinal median plane of the vehicle’ means the plane of symmetry of the vehicle or, if the vehicle is not symmetrical, the vertical longitudinal plane passing through the middle of the vehicle axles. ‘inclination’ means the degree of the angular deviation in relation to a vertical plane;