2.1.
<Strong>General description</Strong>
2.1.1.
The risk assessment process is the overall iterative process that comprises:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.2.
The system definition should address at least the following issues:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.3.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.4.
The risk acceptability of the system under assessment shall be evaluated by using one or more of the following risk acceptance principles:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.5.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.6.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.
<Strong>Use of codes of practice and risk evaluation</Strong>
2.3.1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.2.
The codes of practice shall satisfy at least the following requirements:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.3.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.4.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.5.
If one or more hazards are controlled by codes of practice fulfilling the requirements of point 2.3.2, then the risks associated with these hazards shall be considered as acceptable. This means that:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.6.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.8.
When all hazards are controlled by codes of practice, the risk management process may be limited to:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .