Regulation (EC) No 1907/2006 of the European Parliament and of the CouncilShow full title

[X1 5.1.1. Exposure scenarios as described in Sections 0.7 and 0.8 shall be generated. Exposure scenarios are the core of the process to carry out a chemical safety assessment. The chemical safety assessment process may be iterative. The first assessment will be based on the required minimum and all available hazard information and on the exposure estimation that corresponds to the initial assumptions about the operating conditions and risk management measures (an initial exposure scenario). If the initial assumptions lead to a risk characterisation indicating that risks to human health and the environment are not adequately controlled, then it is necessary to carry out an iterative process with amendment of one or a number of factors in hazard or exposure assessment with the aim to demonstrate adequate control. The refinement of hazard assessment may require generation of additional hazard information. The refinement of exposure assessment may involve appropriate alteration of the operational conditions or risk management measures in the exposure scenario or more precise exposure estimation. The exposure scenario, resulting from the final iteration (a final exposure scenario), shall be included in the chemical safety report and attached to the safety data sheet in accordance with Article 31. U.K.

The final exposure scenario shall be presented under the relevant heading of the chemical safety report, and included in an annex to the safety data sheet, using an appropriate short title giving a brief general description of the use, consistent with those given in Section 3.5 of Annex VI. Exposure scenarios shall cover any manufacture in [F1 Great Britain] and all identified uses.

Textual Amendments

F1 Words in Annex 1 point 5.1.1 substituted (31.12.2020) by The REACH etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/758), reg. 1(1), Sch. 3 para. 1(5) (as amended by S.I. 2020/1577, regs. 1(1)(b), 7(3)(a)(b)); 2020 c. 1, Sch. 5 para. 1(1)

In particular, an exposure scenario includes, where relevant, a description of:

• Operational conditions

  • the processes involved, including the physical form in which the substance is manufactured, processed and/or used,

  • the activities of workers related to the processes and the duration and frequency of their exposure to the substance,

  • the activities of consumers and the duration and frequency of their exposure to the substance,

  • the duration and frequency of emissions of the substance to the different environmental compartments and sewage treatment systems and the dilution in the receiving environmental compartment.

• Risk management measures

  • the risk management measures to reduce or avoid direct and indirect exposure of humans (including workers and consumers) and the different environmental compartments to the substance,

  • the waste management measures to reduce or avoid exposure of humans and the environment to the substance during waste disposal and/or recycling. ]

Editorial Information

X1 Substituted by Corrigendum to Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (Official Journal of the European Union L 396 of 30 December 2006).