[F1Article 17 U.K.
[F21. The amendments required to adjust the annexes to technical progress, designed to amend non-essential elements of this Regulation, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 18(2).]
2. The technical specifications relating to the following sections of Annex IB shall be adopted as soon as possible and if possible before 1 July 1998 by the same procedure:
(a) Chapter II
(a) (d) 17:
displaying and printing of faults in the recording equipment,
(d) 18:
displaying and printing of faults in the driver card,
(d) 21:
displaying and printing of summary reports;
(b) Chapter III
(b) (a) 6.3:
standards for the protection of vehicle electronics against electrical interference and magnetic fields,
(a) 6.5:
protection (security) of the total system,
(c) 1:
warning signals indicating the internal malfunctioning of the recording equipment,
(c) 5:
format of the warnings,
(f):
maximum tolerances;
(c) Chapter IV, A:
(c) 4:
standards,
5:
security, including data protection,
6:
temperature range,
8:
electrical characteristics,
9:
logical structure of the driver card,
10:
functions and commands,
11:
elementary files;
and Chapter IV, B;
(d) Chapter V:
(d) printer and standard print-outs.]
Textual Amendments
F1 Substituted by Council Regulation (EC) No 2135/98 of 24 September 1998 amending Regulation (EEC) No 3821/85 on recording equipment in road transport and Directive 88/599/EEC concerning the application of Regulations (EEC) No 3820/85 and (EEC) No 3821/85.
F2 Substituted by Regulation (EC) No 219/2009 of the European Parliament and of the Council of 11 March 2009 adapting a number of instruments subject to the procedure referred to in Article 251 of the Treaty to Council Decision 1999/468/EC with regard to the regulatory procedure with scrutiny Adaptation to the regulatory procedure with scrutiny — Part Two.