CHAPTER V

Final provisions
Article 17
1
The amendments required to adjust the annexes to technical progress, designed to amend non-essential elements of this Regulation, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 18(2).
2
The technical specifications relating to the following sections of Annex IB shall be adopted as soon as possible and if possible before
1 July 1998
by the same procedure:
a
Chapter II
- (d) 17:
  - displaying and printing of faults in the recording equipment,
- (d) 18:
  - displaying and printing of faults in the driver card,
- (d) 21:
  - displaying and printing of summary reports;
b
Chapter III
- (a) 6.3:
  - standards for the protection of vehicle electronics against electrical interference and magnetic fields,
- (a) 6.5:
  - protection (security) of the total system,
- (c) 1:
  - warning signals indicating the internal malfunctioning of the recording equipment,
- (c) 5:
  - format of the warnings,
- (f):
  - maximum tolerances;
c
Chapter IV, A:
- 4:
  - standards,
- 5:
  - security, including data protection,
- 6:
  - temperature range,
- 8:
  - electrical characteristics,
- 9:
  - logical structure of the driver card,
- 10:
  - functions and commands,
- 11:
  - elementary files;
and Chapter IV, B;
d
Chapter V:
- printer and standard print-outs.
Substituted by Council Regulation (EC) No 2135/98 of 24 September 1998 amending Regulation (EEC) No 3821/85 on recording equipment in road transport and Directive 88/599/EEC concerning the application of Regulations (EEC) No 3820/85 and (EEC) No 3821/85.
Substituted by Regulation (EC) No 219/2009 of the European Parliament and of the Council of 11 March 2009 adapting a number of instruments subject to the procedure referred to in Article 251 of the Treaty to Council Decision 1999/468/EC with regard to the regulatory procedure with scrutiny Adaptation to the regulatory procedure with scrutiny — Part Two.