CHAPTER 1

SCOPE, DEFINITIONS AND WATERWAY ZONES

Subject matter
Article 1
This Directive establishes:
1. the technical requirements necessary to ensure the safety of craft navigating on the inland waterways referred to in Article 4; and
2. the classification of those inland waterways.

Scope of application
Article 2
1
This Directive applies to the following craft:
a
vessels having a length (L) of 20 metres or more;
b
vessels for which the product of length (L), breadth (B) and draught (T) is a volume of 100 cubic metres or more;
c
tugs and pushers intended for towing or pushing either craft referred to in points (a) and (b) or floating equipment, or intended for moving such craft or floating equipment alongside;
d
passenger vessels;
e
floating equipment.
2
This Directive does not apply to:
a
ferries;
b
naval vessels;
c
seagoing ships, including seagoing tugs and pushers, which:
1. operate or are based on tidal waters; or
2. operate temporarily on inland waterways;
provided that they carry at least:
- a certificate proving conformity with the 1974 International Convention for the Safety of Life at Sea (SOLAS), or equivalent certificate; a certificate proving conformity with the 1966 International Convention on Load Lines, or equivalent, and an international oil pollution prevention (IOPP) certificate proving conformity with the 1973/78 International Convention for the Prevention of Pollution from Ships (Marpol),
- in case of seagoing ships not covered by SOLAS the 1966 International Convention on Load Lines or Marpol, the relevant certificates and the freeboard marks required by the laws of their flag states,
- in the case of passenger vessels not covered by any of the Conventions referred to in the first indent, a certificate on safety rules and standards for passenger ships issued in conformity with Directive 2009/45/EC of the European Parliament and of the Council , or
- in the case of recreational craft not covered by any of the Conventions referred to in the first indent, a certificate of the country of which it carries the flag, demonstrating an adequate level of safety.

Definitions
Article 3
For the purposes of this Directive, the following definitions apply:
1. ‘craft’ means a vessel or item of floating equipment;
2. ‘vessel’ means an inland waterway vessel or seagoing ship;
3. ‘inland waterway vessel’ means a vessel intended solely or mainly for navigation on inland waterways;
4. ‘tug’ means a vessel specially built to perform towing operations;
5. ‘pusher’ means a vessel specially built to propel a pushed convoy;
6. ‘passenger vessel’ means a day trip or cabin vessel constructed and equipped to carry more than 12 passengers;
7. ‘floating equipment’ means a floating installation carrying working gear such as cranes, dredging equipment, pile drivers or elevators;
8. ‘floating establishment’ means any floating installation not normally intended to be moved, such as a swimming bath, dock, jetty or boathouse;
9. ‘floating object’ means a raft or other structure, object or assembly capable of navigation, not being a vessel or floating equipment or establishment;
10. ‘recreational craft’ means a vessel other than a passenger vessel, intended for sport or pleasure;
11. ‘high-speed vessel’ means a motorised craft capable of reaching speeds over 40 km/h in relation to water;
12. ‘water displacement’ means the immersed volume of the vessel, in cubic metres;
13. ‘length (L)’ means the maximum length of the hull in metres, excluding rudder and bowsprit;
14. ‘breadth (B)’ means the maximum breadth of the hull in metres, measured to the outer edge of the shell plating (excluding paddle wheels, rub rails, and similar);
15. ‘draught (T)’ means the vertical distance in metres between the lowest point of the hull without taking into account the keel or other fixed attachments and the maximum draught line;
16. ‘linked inland waterways’ means waterways of a Member State connected, by inland waterways which can be navigated under national or international law by craft falling within the scope of this Directive, to inland waterways of another Member State.

Classification of inland waterways
Article 4
1
For the purposes of this Directive, the inland waterways of the Union shall be classified as follows:
a
Zones 1, 2, 3 and 4:
1. Zones 1 and 2: the waterways listed in Chapter 1 of Annex I;
2. Zone 3: the waterways listed in Chapter 2 of Annex I;
3. Zone 4: all other inland waterways which can be navigated under national law by craft falling within the scope of this Directive.
b
Zone R: those of the waterways referred to in point (a) for which certificates are to be issued in accordance with Article 22 of the Revised Convention for Rhine Navigation as that Article is worded on 6 October 2016.
2
The Commission is empowered to adopt delegated acts in accordance with Article 32 concerning amendments to Annex I so as to modify the classification of a waterway, including the addition and deletion of waterways. Such amendments to Annex I may be made only on request by the Member State concerned, for waterways on its territory.
CHAPTER 2

NAVIGATION CERTIFICATES

Compliance with technical and safety requirements
Article 5
1
Member States shall ensure that craft referred to in Article 2(1) operating on the Union inland waterways referred to in Article 4 are constructed and maintained in accordance with the requirements set out in this Directive.
2
Compliance of a craft with paragraph 1 shall be attested by a certificate issued in accordance with this Directive.

Union inland navigation certificates
Article 6
1
Union inland navigation certificates shall be issued by the competent authorities of the Member States in accordance with this Directive. Member States shall, upon issuance of a Union inland navigation certificate, verify that the craft in question has not already been issued a valid certificate referred to in Article 7.
2
The Union inland navigation certificate shall be drawn up in accordance with the model provided for in Annex II.
3
Each Member State shall draw up a list indicating the competent authorities for issuing the Union inland navigation certificates and shall notify the Commission thereof, including any changes to the list. The Commission shall maintain an up-to-date list of competent authorities on an appropriate website.
4
The Union inland navigation certificate shall be issued to craft following a technical inspection, carried out before the craft is put into service and intended to check whether the craft complies with the technical requirements referred to in Annexes II and V.
5
Compliance of a craft with the additional requirements referred to in Article 23(1) and (2) shall, where appropriate, be checked during the technical inspections provided for in paragraph 4 of this Article and in Article 29, or during a technical inspection carried out at the request of the owner of the craft or its representative.
6
The procedures for making a request for an inspection and for establishing the place and time of that inspection shall fall within the powers of the competent authorities issuing the Union inland navigation certificate. The competent authority shall determine which documents are to be submitted. The procedure shall take place in such a way as to ensure that the inspection may be conducted within a reasonable period following the lodging of the request.
7
The competent authorities of Member States shall, at the request of the owner of the craft or its representative, issue a Union inland navigation certificate to a craft that is not subject to this Directive, if that craft fulfils the requirements set out in this Directive.

Obligation to carry a certificate
Article 7
Craft operating on the Union inland waterways referred to in Article 4 shall carry the following original documents:
1. when operating on a Zone R waterway either:
  - a certificate issued pursuant to Article 22 of the Revised Convention for Rhine Navigation, or
  - a Union inland navigation certificate attesting to the full compliance of the craft, where applicable pursuant to the transitional provisions under Annex II to this Directive for craft navigating on the Rhine (Zone R), with technical requirements referred to in Annexes II and V to this Directive, for which equivalency with the technical requirements laid down in application of the Revised Convention for Rhine Navigation has been established in accordance with the applicable rules and procedures;
2. when operating on other waterways, a Union inland navigation certificate or a certificate issued pursuant to Article 22 of the Revised Convention for Rhine Navigation, including, where applicable, any supplementary Union inland navigation certificates in accordance with Article 8 of this Directive.

Supplementary Union inland navigation certificates
Article 8
1
Craft carrying a valid Union inland navigation certificate or a certificate issued pursuant to Article 22 of the Revised Convention for Rhine Navigation shall be provided with a supplementary Union inland navigation certificate in accordance with Article 23 of this Directive.
2
The supplementary Union inland navigation certificate shall be drawn up in accordance with the model provided for in Annex II and shall be issued by the competent authorities under the conditions laid down for the waterways concerned.

Provisional Union inland navigation certificates
Article 9
1
The competent authorities of Member States may issue a provisional Union inland navigation certificate:
a
to craft that intend to travel to a certain place with the permission of the competent authority in order to obtain a Union inland navigation certificate;
b
to craft whose Union inland navigation certificate has been lost, damaged or temporarily withdrawn as referred to in Articles 13 and 15 or in Annexes II and V;
c
to craft whose Union inland navigation certificate is being prepared following a successful inspection;
d
to craft which have not met all of the conditions required for obtaining a Union inland navigation certificate in accordance with Annexes II and V;
e
to craft that are so damaged that they no longer comply with their Union inland navigation certificate;
f
to floating establishments or floating objects in cases where the authorities responsible for special transport operations have made the authorisation to carry out a special transport operation subject to obtaining such a provisional Union inland navigation certificate, as provided for by the applicable navigational authority regulations of the Member States;
g
to craft benefitting from a derogation from Annexes II and V, in accordance with Articles 25 and 26 of this Directive, pending the adoption of the relevant implementing acts.
2
The provisional Union inland navigation certificate shall be issued only where the navigability of the craft, floating establishment or floating object appears to have been adequately ensured. It shall be drawn up using the model provided for in Annex II.
3
The provisional Union inland navigation certificate shall include the conditions considered necessary by the competent authority and shall be valid:
a
in the cases referred to in points (a), (d), (e) and (f) of paragraph 1, for a single specific trip to be made within a suitable period, which shall not exceed one month;
b
in the cases referred to in points (b) and (c) of paragraph 1, for an appropriate duration;
c
in the cases referred to in point (g) of paragraph 1, for six months; the provisional Union inland navigation certificate may be extended for six months at a time until the respective implementing act has been adopted.

Validity of Union inland navigation certificates
Article 10
1
The period of validity of Union inland navigation certificates issued to newly built craft shall be determined by the competent authority and shall not exceed:
a
five years in the case of passenger and high-speed vessels;
b
10 years in the case of all other craft.
The period of validity shall be stated on the Union inland navigation certificate.
2
In the case of craft already in operation before the technical inspection takes place, the competent authority shall set the period of validity of the Union inland navigation certificate on a case-by-case basis, in the light of the results of the inspection. However, the period of validity shall not exceed the periods set out in paragraph 1.

Exceptional extension of validity of Union inland navigation certificates
Article 11
The validity of a Union inland navigation certificate may be exceptionally extended without a technical inspection for not more than six months in accordance with Annexes II and V, by the competent authority which issued or renewed it. The extension shall be indicated on that certificate.

Renewal of Union inland navigation certificates
Article 12
1
The Union inland navigation certificate shall be renewed on expiry of its period of validity in accordance with the conditions laid down in Article 6, following a technical inspection o check whether the craft complies with the technical requirements referred to in Annexes II and V. Union inland navigation certificates may be renewed by any competent authority that has been notified to the Commission pursuant to Article 6(3).
2
Where Union inland navigation certificates are renewed, the transitional provisions provided for in Annex II shall apply to the craft under the conditions specified in that Annex.

Replacement of Union inland navigation certificates
Article 13
Each Member State shall lay down the conditions under which a valid Union inland navigation certificate which has been lost or damaged may be replaced. Those conditions shall require craft applying for replacement, in the case of loss, to provide a declaration of the loss of the certificate, or in the case of damage, to return the damaged certificate. The replacement certificate shall state that it is a duplicate.

Major alterations or major repairs of craft
Article 14
In the event of major alterations or major repairs which affect the craft's compliance with the technical requirements referred to in Annexes II and V concerning its structural soundness, navigation, manoeuvrability or special features, that craft shall undergo, prior to any further voyage, the technical inspection provided for in Article 6.
Following that inspection, the existing Union inland navigation certificate shall be amended to reflect the altered technical characteristics of the craft or that certificate shall be withdrawn and a new one issued. If the new certificate is issued in a Member State other than that which issued or renewed the initial certificate, the competent authority which issued or renewed the certificate shall be informed accordingly within 30 days from the date of issuance of the new certificate.

Refusal to issue or renew, and withdrawal of, Union inland navigation certificates
Article 15
1
Any decision not to issue or renew a Union inland navigation certificate shall state the grounds on which it is based. The owner of the craft or its representative shall be notified thereof and shall be informed about the appeal procedure and the time limits applicable in the Member State concerned.
2
Any valid Union inland navigation certificate may be withdrawn by the competent authority which issued or renewed it if the craft ceases to comply with the technical requirements set out in its certificate.

Recognition of navigation certificates of craft from third countries
Article 16
Pending the entry into force of agreements on the mutual recognition of navigation certificates between the Union and third countries, the competent authorities of a Member State may recognise the navigation certificates of craft from third countries for navigation within the territory of that Member State.

Registers of certificates
Article 17
Member States shall ensure that their competent authorities keep a register of all certificates they have issued or renewed pursuant to Articles 6, 8, 9 and 12. That register shall include the information contained in the model certificate provided for in Annex II.
CHAPTER 3

VESSEL IDENTIFICATION, INSPECTIONS AND ALTERED TECHNICAL REQUIREMENTS

Unique European vessel identification number
Article 18
1
Member States shall ensure that each craft is assigned a unique European vessel identification number (ENI), in accordance with Annexes II and V.
2
Each craft shall have only one ENI, which shall remain unchanged during its entire lifetime.
3
When issuing a Union inland navigation certificate, the competent authority shall include the ENI therein.
4
Each Member State shall draw up a list indicating the competent authorities responsible for assigning ENIs and shall notify the Commission thereof, as well as any changes to the list. The Commission shall maintain an up-to-date list of competent authorities on an appropriate website.

European Hull Data Base
Article 19
1
The Commission shall keep the EHDB in order to support administrative measures for maintaining safety and ease of navigation and to ensure application of this Directive.
Any processing of personal data by the Member States shall be carried out in accordance with Union law on the protection of personal data, in particular Regulation (EU) 2016/679 of the European Parliament and of the Council .
Any processing of personal data by the Commission shall be carried out in accordance with Regulation (EC) No 45/2001 of the European Parliament and of the Council .
2
Member States shall ensure that, for each craft, the competent authorities enter, without delay, in the EHDB:
a
the data identifying and describing the craft in accordance with this Directive;
b
the data relating to the certificates issued, renewed, replaced and withdrawn, as well as the competent authority which issued the certificate, in accordance with this Directive;
c
a digital copy of all certificates issued by competent authorities in accordance with this Directive;
d
the data on any rejected or pending applications for certificates in accordance with this Directive; and
e
any changes to the data referred to in points (a) to (d).
3
The data referred to in paragraph 2 may be processed by competent authorities of Member States, contracting parties to the Revised Convention for Rhine Navigation and third countries that are entrusted with tasks related to the application of this Directive and of Directive 2005/44/EC of the European Parliament and of the Council , for the following purposes:
a
applying this Directive and of Directive 2005/44/EC;
b
ensuring waterway traffic and infrastructure management;
c
maintaining or enforcing safety of navigation;
d
collecting statistical data.
4
The competent authority of a Member State may transfer personal data to a third country or international organisation provided that it does so only on a case-by-case basis and that the requirements of Regulation (EU) 2016/679, and in particular those set out in Chapter V thereof, are fulfilled. Member States shall ensure that the transfer is necessary for the purposes referred to in paragraph 3 of this Article. Member States shall ensure that the third country or international organisation does not transfer the data to another third country or international organisation unless it is given express written authorisation to do so and complies with the conditions specified by the competent authority of the Member State.
5
The Commission may, on a case-by-case basis, transfer personal data or grant access to the EHDB to an authority of a third country or international organisation provided that the transfer or access is necessary for the purposes referred to in paragraph 3 of this Article, and provided the requirements of Article 9 of Regulation (EC) No 45/2001 are fulfilled. The Commission shall ensure that the transfer or access is necessary for the purposes referred to in paragraph 3 of this Article. The Commission shall ensure that the third country or international organisation does not transfer the data to another third country or international organisation unless it is given express written authorisation and complies with the conditions specified by the Commission.
6
The competent authority shall ensure that the data related to a craft is deleted from the database referred to in paragraph 1 when this craft is scrapped.
7
The Commission is empowered to adopt delegated acts in accordance with Article 32 further specifying:
a
the data to be entered in the database by Member States;
b
the types of access permitted, taking into account the categories of the recipients of data and the purposes for which such data are processed referred to in paragraph 3 of this Article;
c
the instructions regarding the use and operation of the database, in particular with respect to data security measures, encoding and processing of data and interconnection of the database with the registers referred to in Article 17.

Carrying out of technical inspections
Article 20
1
Member States shall ensure that the competent authorities referred to in paragraph 3 carry out the initial, periodical, special and voluntary inspections referred to in this Directive.
2
Those competent authorities may refrain from subjecting the craft in whole or in part to technical inspection where it is evident from a valid attestation, issued by a recognised classification society in accordance with Article 21, that the craft satisfies, in whole or in part, the technical requirements referred to in Annexes II and V.
3
Each Member State shall draw up a list indicating its competent authorities which are responsible for carrying out technical inspections and shall notify the Commission thereof, including any changes to the list. The Commission shall maintain an up-to-date list of competent authorities and inspection bodies on an appropriate website.
4
Each Member State shall comply with the specific requirements as regards inspection bodies and the request for an inspection, provided for in Annexes II and V.

Recognition of classification societies
Article 21
1
The Commission shall adopt implementing acts in order to recognise a classification society which meets the criteria listed in Annex VI, or to withdraw recognition, in accordance with the procedure set out in paragraphs 2 and 3 of this Article. Those implementing acts shall be adopted in accordance with the advisory procedure referred to in Article 33(2).
2
An application for recognition shall be submitted to the Commission by the Member State in which the classification society has its headquarters or a subsidiary authorised to issue attestations that a craft satisfies the requirements referred to in Annexes II and V in accordance with this Directive. This application shall be accompanied by all information and documentation needed to check that the criteria for recognition are met.
3
Any Member State may submit to the Commission a request to withdraw the recognition if it considers that a classification society no longer meets the criteria set out in Annex VI. The request for withdrawal shall be accompanied by documentary evidence.
4
The classification societies which, by 6 October 2016, have been granted recognition in accordance with Directive 2006/87/EC shall retain their recognition.
5
The Commission shall publish for the first time by 7 October 2017, and shall keep updated on an appropriate website, a list of the classification societies recognised in accordance with this Article. Member States shall communicate to the Commission any changes relating to the names or addresses of the classification societies for which they have applied for recognition.

Control of compliance
Article 22
1
Member States shall ensure that their competent authorities may at any time control whether a craft is carrying a valid certificate in accordance with Article 7 and whether it satisfies the requirements for the issuance of such a certificate.
In the case of failure to comply with the requirements, the competent authorities shall take appropriate measures in accordance with paragraphs 2 to 5 of this Article. They shall also request that the owner of the craft or its representative takes all necessary measures to remedy the situation within a time limit set by the competent authorities.
The competent authority which issued the certificate carried on the craft shall be informed of such failures within seven days of the control.
2
Where a valid certificate is not being carried, the craft may be prevented from proceeding with its voyage.
3
If, during the control, the competent authorities find that the craft constitutes a manifest danger for the persons on board, the environment or the safety of the navigation, they may prevent the craft from proceeding with its voyage until the necessary steps have been taken to remedy the situation.
The competent authorities may also prescribe proportionate measures which will enable the craft to proceed safely, where appropriate on termination of its transport operations, to a place where it will either be inspected or repaired.
4
A Member State which has prevented a craft from proceeding with its voyage, or has notified the owner of the craft or its representative of its intention to so prevent it if the defects found are not corrected, shall inform the competent authority in the Member State which issued or last renewed the craft's certificate, within seven days of the decision which it has taken or intends to take.
5
Any decision to interrupt the passage of a craft taken in the implementation of this Directive shall state in detail the reasons on which it is based. Such decision shall be notified without delay to the party concerned, who shall at the same time be informed of the appeal procedures available under the laws in force in the Member State concerned and of their time limits.

Altered technical requirements for certain zones
Article 23
1
Member States may, where applicable subject to the requirements of the Revised Convention for Rhine Navigation, adopt technical requirements additional to those referred to in Annexes II and V for craft operating on Zone 1 and 2 waterways within their territory. Such additional requirements shall cover only the elements listed in Annex III.
2
In respect of passenger vessels operating on Zone 3 non-linked inland waterways, each Member State may maintain technical requirements in addition to those referred to in Annexes II and V. Such additional requirements shall cover only the elements listed in Annex III.
3
Where application of the transitional provisions referred to in Annex II would result in a reduction in existing national safety standards, a Member State may disapply those transitional provisions in respect of passenger vessels operating on its non-linked inland waterways. In such circumstances, the Member State concerned may require that, from 30 December 2008, such passenger vessels operating on its non-linked inland waterways comply fully with the technical requirements referred to in Annexes II and V.
4
Members State may allow a partial application of the technical requirements or set technical requirements which are less stringent than those referred to in Annexes II and V in respect of craft operating exclusively on Zone 3 and 4 waterways within its territory. The less stringent technical requirements or the partial application of the technical requirements shall cover only the elements listed in Annex IV.
5
Where a Member State applies paragraph 1, 2, 3 or 4, it shall notify the Commission thereof at least six months before the envisaged date of application. The Commission shall inform the other Member States accordingly.
In the cases referred to in paragraphs 1 and 2 of this Article, the Commission shall adopt implementing acts to approve the additional technical requirements. Those implementing acts shall be adopted in accordance with the advisory procedure referred to in Article 33(2).
6
Compliance with the altered technical requirements in accordance with paragraphs 1, 2, 3 and 4 shall be specified in the Union inland navigation certificate or in the supplementary Union inland navigation certificate.

Derogations for certain categories of craft
Article 24
1
While maintaining an adequate level of safety, Member States may authorise derogations from all or part of this Directive for:
a
craft operating on non-linked inland waterways;
b
craft having a dead weight not exceeding 350 tonnes or craft not intended for the carriage of goods and having a water displacement of less than 100 cubic metres, which were laid down before 1 January 1950 and which operate exclusively within their territory.
2
Without prejudice to the Revised Convention for Rhine Navigation, Member States may authorise, in respect of navigation within their territory, derogations from this Directive for craft operating limited journeys of local interest or in harbour areas. The derogations and the journeys or areas for which they are valid shall be specified in the craft's certificate.
3
The Member States shall notify the Commission of the derogations authorised in accordance with paragraphs 1 and 2. The Commission shall inform the other Member States accordingly.

Use of new technologies and derogations for specific craft
Article 25
1
In order to encourage innovation and the use of new technologies in inland navigation, the Commission shall be empowered to adopt implementing acts allowing derogations or recognising the equivalence of technical specifications for a specific craft regarding:
a
the issuance of a Union inland navigation certificate recognising the use, or presence, on board a craft of other materials, installations or items of equipment, or the adoption of arrangements or design aspects other than those included in Annexes II and V, provided that an equivalent level of safety is ensured;
b
the issuance of a Union inland navigation certificate for trial purposes for a limited period incorporating new technical specifications that derogate from the requirements of Annexes II and V, provided that an adequate level of safety is ensured.
Those implementing acts shall be adopted in accordance with the advisory procedure referred to in Article 33(2).
2
The competent authorities of a Member State shall specify any applicable derogations and recognitions of equivalences referred to in paragraph 1 in the Union inland navigation certificate.

Hardship
Article 26
1
Following the expiry of transitional provisions to technical requirements laid down in Annex II, the Commission may adopt implementing acts allowing derogations from the technical requirements laid down in that Annex which were subject to those transitional provisions, where those requirements are technically difficult to apply or where their application might entail disproportionate costs.
Those implementing acts shall be adopted in accordance with the advisory procedure referred to in Article 33(2).
2
The competent authorities of a Member State shall specify any applicable derogations referred to in paragraph 1 in the Union inland navigation certificate.

Register of type-approved equipment
Article 27
The Commission shall publish on an appropriate website a register of equipment which has been type-approved in accordance with Annexes II and V.
CHAPTER 4

FINAL PROVISIONS

Transitional provisions concerning the use of documents
Article 28
Documents falling within the scope of this Directive and issued by the competent authorities of the Member States under Directive 2006/87/EC before
6 October 2018
shall remain valid until they expire.

Craft excluded from the scope of Directive 82/714/EEC
Article 29
1
The Union inland navigation certificate shall be issued to craft excluded from the scope of Council Directive 82/714/EEC , but covered by this Directive in accordance with Article 2(1) of this Directive, following a technical inspection to check whether the craft comply with the technical requirements referred to in Annexes II and V to this Directive. That technical inspection shall be carried out upon the expiry of the craft's current certificate, and in any event no later than 30 December 2018.
2
Any failure to meet the technical requirements referred to in Annexes II and V shall be specified in the Union inland navigation certificate. Provided that the competent authorities consider that these shortcomings do not constitute a manifest danger, the craft referred to in paragraph 1 of this Article may continue to operate until such time as those components or areas of the craft which have been certified as not meeting those requirements are replaced or altered, following which those components or areas shall meet the technical requirements referred to in Annexes II and V.
3
The replacement of existing parts with identical parts or parts of an equivalent technology and design during routine repairs and maintenance shall not be considered to be a replacement or an alteration within the meaning of paragraph 2.
4
Manifest danger within the meaning of paragraph 2 of this Article shall be presumed in particular when requirements concerning the structural soundness, navigation or manoeuvrability or special features of the craft in accordance with the technical requirements referred to in Annexes II and V are affected. Derogations that are provided for in the technical requirements referred to in Annexes II and V shall not be identified as shortcomings which constitute a manifest danger.

Transitional provisions concerning temporary requirements pursuant to Directive 2006/87/EC
Article 30
Temporary requirements adopted in accordance with Article 1.06 of Annex II to Directive 2006/87/EC shall remain valid until they expire.

Adaptation of the Annexes
Article 31
1
The Commission shall adopt delegated acts in accordance with Article 32 to adapt Annex II to update, without undue delay, the reference to the most recent version of the ES-TRIN standard and to set the date of its application.
2
By way of derogation from paragraph 1, where duly justified by an appropriate analysis and in the absence of pertinent and up-to-date international standards to ensure safety of navigation or where changes in the decision-making process of CESNI would compromise Union interests, the Commission is empowered to adopt delegated acts in accordance with Article 32 to amend Annex II to provide appropriate technical requirements.
3
The Commission is empowered to adopt delegated acts in accordance with Article 32 concerning the adaptations of Annexes III and IV to scientific and technical progress.
4
The Commission is empowered to adopt delegated acts in accordance with Article 32 concerning the adaptations of Annex V to update and streamline administrative provisions.
5
The Commission is empowered to adopt delegated acts in accordance with Article 32 concerning the adaptations of Annex VI to amend the criteria for the recognition of classification societies to ensure safety of navigation.
6
The Commission is empowered to adopt delegated acts in accordance with Article 32 in order to update the references in this Directive to certain provisions of Annexes II and V in order to take into account the amendments brought to these Annexes.

Exercise of the delegation
Article 32
1
The power to adopt delegated acts is conferred on the Commission subject to the conditions laid down in this Article.
2
The power to adopt delegated acts referred to in Articles 4, 19 and 31 shall be conferred on the Commission for a period of five years from 6 October 2016. The Commission shall draw up a report in respect of the delegation of power not later than nine months before the end of the five-year period. The delegation of power shall be tacitly extended for periods of an identical duration, unless the European Parliament or the Council opposes such extension not later than three months before the end of each period.
3
The delegation of power referred to in Articles 4, 19 and 31 may be revoked at any time by the European Parliament or by the Council. A decision to revoke shall put an end to the delegation of the power specified in that decision. It shall take effect the day following the publication of the decision in the Official Journal of the European Union or at a later date specified therein. It shall not affect the validity of any delegated acts already in force.
4
Before adopting a delegated act, the Commission shall consult experts designated by each Member State in accordance with principles laid down in the Interinstitutional Agreement of 13 April 2016 on Better Law-Making.
5
As soon as it adopts a delegated act, the Commission shall notify it simultaneously to the European Parliament and to the Council.
6
A delegated act adopted pursuant to Articles 4, 19 and 31 shall enter into force only if no objection has been expressed either by the European Parliament or by the Council within a period of two months of notification of that act to the European Parliament and the Council or if, before the expiry of that period, the European Parliament and the Council have both informed the Commission that they will not object. That period shall be extended by two months at the initiative of the European Parliament or of the Council.

Committee procedure
Article 33
1
The Commission shall be assisted by the Committee established by Article 7 of Council Directive 91/672/EEC (hereinafter ‘the Committee’). The Committee is a committee within the meaning of Regulation (EU) No 182/2011.
2
Where reference is made to this paragraph, Article 4 of Regulation (EU) No 182/2011 shall apply.
Where the opinion of the committee is to be obtained by written procedure, that procedure shall be terminated without result when, within the time limit for delivery of the opinion, the chair of the committee so decides.

Review
Article 34
The Commission shall submit, before 7 October 2021, a report to the European Parliament and to the Council reviewing the effectiveness of the measures introduced by this Directive, particularly as regards the harmonisation of technical requirements and the development of technical standards for inland navigation. The report shall also review the mechanisms for cooperation with international organisations competent for inland navigation. The report shall, if appropriate, be accompanied by a legislative proposal to further streamline cooperation and coordination in establishing standards to which reference can be made in legal acts of the Union. The Commission shall submit a similar report following any major developments in inland waterway transport.

Penalties
Article 35
Member States shall lay down the rules on penalties applicable to infringements of the national provisions adopted pursuant to this Directive and shall take the measures necessary to ensure that they are implemented. The penalties provided for shall be effective, proportionate and dissuasive.

Amendment to Directive 2009/100/EC
Article 36
Directive 2009/100/EC is amended as follows:
1. Article 1 is replaced by the following:
Article 1
This Directive applies to vessels used for goods transport on inland waterways and having a total dead weight of 20 metric tonnes or more:
  1. having a length of less than 20 metres; and
  2. for which the product of length (L), breadth (B) and draught (T) is less than 100 cubic metres.
This Directive is without prejudice to the Rhine Vessel Inspection Regulations and to the European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways (ADN).
.
2. Article 3 is amended as follows:
  1. Paragraph 4 is replaced by the following:
4.
Member States may require vessels carrying dangerous goods as defined in the ADN to comply with the requirements laid down in that Agreement. As evidence of this, they may require that the authorisation provided for in that Agreement be produced.
;
  2. the second subparagraph of paragraph 5 is replaced by the following:
Special conditions for the transport of dangerous goods shall be considered fulfilled in all Community waterways if the vessels meet the requirements of the ADN. Evidence of compliance with those requirements may be provided by the authorisation referred to in paragraph 4.
.

Transposition
Article 37
1
Without prejudice to Article 40, Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive, at the latest by 7 October 2018 and which shall apply from this date. They shall immediately inform the Commission thereof.
When Member States adopt such measures, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. The methods of making such reference shall be laid down by Member States.
2
Member States shall communicate to the Commission the text of the measures of national law which they adopt in the field covered by this Directive.
3
Any Member State which, as a result of derogations authorised in accordance with Article 24(1) and (2), has no craft subject to this Directive operating on its waterways shall not be required to transpose Chapter 2, Article 18(3) and Articles 20 and 21.

Repeal
Article 38
Directive 2006/87/EC is repealed with effect from 7 October 2018.
References to the repealed Directive shall be construed as references to this Directive and shall be read in accordance with the correlation table set out in Annex VII.

Entry into force
Article 39
This Directive shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

Addressees
Article 40
This Directive is addressed to the Member States except Denmark, Estonia, Ireland, Greece, Spain, Cyprus, Latvia, Malta, Portugal, Slovenia and Finland.
Directive 2009/45/EC of the European Parliament and of the Council of 6 May 2009 on safety rules and standards for passenger ships (OJ L 163, 25.6.2009, p. 1).
Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ L 119, 4.5.2016, p. 1).
Regulation (EC) No 45/2001 of the European Parliament and of the Council of 18 December 2000 on the protection of individuals with regard to the processing of personal data by the Community institutions and bodies and on the free movement of such data (OJ L 8, 12.1.2001, p. 1).
Directive 2005/44/EC of the European Parliament and of the Council of 7 September 2005 on harmonised river information services (RIS) on inland waterways in the Community (OJ L 255, 30.9.2005, p. 152).
Council Directive 82/714/EEC of 4 October 1982 laying down technical requirements for inland waterway vessels (OJ L 301, 28.10.1982, p. 1).
Council Directive 91/672/EEC of 16 December 1991 on the reciprocal recognition of national boatmasters' certificates for the carriage of goods and passengers by inland waterway (OJ L 373, 31.12.1991, p. 29).
Substituted by Corrigendum to Directive (EU) 2016/1629 of the European Parliament and of the Council of 14 September 2016 laying down technical requirements for inland waterway vessels, amending Directive 2009/100/EC and repealing Directive 2006/87/EC (Official Journal of the European Union L 252 of 16 September 2016).